golfdiesel

Joined: 12th January 2006

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

golfdiesel
up to GBP100 would be ok with me, but just.
If it is more then GBP100 it will be hard to justify the difference since resale value isn't really an issue if you look at camera bodies, I mean, who is going to fork out cash for a used *ist DS or a used *ist D? The development goes so quickly that the unit is old when it is released.

For lenses I think it is different, glass will hold it's value much better and there the Pentax brand will make a difference in the resale value I think.

Comment by golfdiesel posted on How much would you pay for a badge? at 24/02/2008 - 18:33

golfdiesel
rabbitmountain is about 45 minutes by car for me so I am lucky in that way. the only thing is that they stock very little Pentax gear in the shop so you will probably have to make an appointment there to take a look at the units.

Maybe we can organise a Dutch user meeting there so we can all have a look at the K20D.

Comment by golfdiesel posted on First K20D delivered in Germany at 25/02/2008 - 10:26

golfdiesel
Quote:
Reuben0 wrote:
Also Silkypix doesn't understand the RAW PEF files yet (no real suprise there).
Have to say this is one of my main concerns about getting a K20D - I use Capture One v3.7, it took long enough for the K10D to be supported by that and I only got one when it was. C1 is now at v4, but I wasn't keen on the trial version of that, and I'd need a bigger screen to run it. I wasn't that keen on the Silkypix UI either.

So, for me, it would be new camera, new software, added expense, pain in the backside. For now I think I'll stick with the K10D.

I think.

Dan

(Still going to SRS on the 8th March to have a play though. )
I think that Silkypix will include support for the K20D very soon, they added the K10D quite quickly as well.
Because the Silkypix engine is used by the Pentax software the format details will have been supplied to Silkypix quite a while ago.

Comment by golfdiesel posted on First K20D delivered in Germany at 24/02/2008 - 18:26

golfdiesel
Quote:
No sign of them here yet - but the price has dropped already - Konijnenberg has the body for €995, which seems to be the cheapest.
No word on the Samsung here at all.
hmm must resist... (hand reaching for wallet...) I wonder what the price will be towards the summer... 995 for the body only is a very nice price.

Comment by golfdiesel posted on First K20D delivered in Germany at 24/02/2008 - 18:23

golfdiesel
Quote:
SRS have the K20D in stock now

£799 Body Only

I was on the waiting list - it should be with me on Monday

(I can't believe I turned down Saturday delivery)
This will be a loooooooooooooooooooooong weekend for you

Comment by golfdiesel posted on First K20D delivered in Germany at 22/02/2008 - 15:24

golfdiesel
Quote:
Hyram wrote:
Quote:
I'm hopefully getting them tomorrow...

Chris
....................and the pricing : :
It's on the SRS website. 899GBP with kit lens.
So in Germany it is about Euro 200 less.
Will the price for the body only version end up below 1000 Euro's?

Comment by golfdiesel posted on First K20D delivered in Germany at 21/02/2008 - 20:22

golfdiesel
Quote:
I recharged my two RCR-V3s last night because I thought the K100D Super was slowing down a bit.

What I noticed is that while there was hardly any noticeable drop in output voltage at the "use end" when not under load (3.30V charged - 3.28V getting low), but that the "charge end" voltage does change (4.20V just charged - 3.60V getting low). I'll have to keep an eye on this, but if the newly charged batteries show a similar characteristic, perhaps it can be used by users with a voltmeter to determine approx. how low the remaining charge is.

Dan Bridges.
4.2 volt is quite high I think. I don't know what the margins are for the camera.
NiMH cells are typically charged to 1.3 or 1.4 volts after which they drop quite quickly to 1.2 volts where they stay stable until allmost exhausted.

Comment by golfdiesel posted on Using CR-V3 and RCR-V3 batteries in Pentax DSLRs at 22/02/2008 - 07:22

golfdiesel
Quote:
What is the advantage with Eneloop type batteries if you use your camera very frequently?

How do they last longer than ordinary NiMH cells if the capacity is lower?
This is very easily explained. Your NiMH cells loose a major part of their charge due to self discharge, the Eneloops have a much lower self discharge rate, hence they last longer with a lower capacity.
the only time a NiMH cell will last longer is when you charge it and use it directly until they are exhausted.

Comment by golfdiesel posted on Using CR-V3 and RCR-V3 batteries in Pentax DSLRs at 19/02/2008 - 13:28

golfdiesel
To keep your NiMH AA batteries in good condition it is important to use a good quality charger which charges every slot seperately.

After two years I see that some of the batteries are reaching the end of their life because they are empty more quickly then before.
The next sets I will probably get the newer types which hold their charge for up to a year (normal NiMH loose a huge part of their charge within 2 weeks), their capacity is lower then of the highest capacity NiMH's but because they hold their charge for a longer period they will probably last longer in your camera and since you have to charge them less frequently they could have a longer lifetime as well.

Comment by golfdiesel posted on Using CR-V3 and RCR-V3 batteries in Pentax DSLRs at 17/02/2008 - 21:00

golfdiesel
Quote:
This story seems all too common, I was at a christmas party and the host had just got a new 6mp compact from santa (kodak as I recall) anyway he asked my advice but totally ignored it by letting another guest change the jpeg setting to the lowest possible resolution, I gave up and went back to enjoying myself.
I can just imaging the "Oooos" and "Awwws" when they get their 6x4 prints from the instant print lab......."these are much better than when we used those disposable things aren't they"
sounds very familiar, I think we all have experienced these situations. I try to stay out of them and only when people start complaining about the image quality I make the suggestion to use the highest setting available

Comment by golfdiesel posted on K10D Jpeg settings at 22/02/2008 - 07:25

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo