All Forum Comments
Comment by golfdiesel posted on Rumours of K2000D at 04/07/2008 - 07:56
with no in-body AF motor.
Comment by golfdiesel posted on Rumours of K2000D at 03/07/2008 - 22:20
So maybe Tamron can help you out.
The Australian distributor is Maxwell: http://www.maxwell.com.au
The 28-75 di lens seems to have a 67mm filter diameter.
http://www.maxwell.com.au/tamron/di28-75afsp.html
The cap itself has partnumber CP67 and looks like this:

Hama has a universal one as well with a pinch grip.
Warning, text is in German.
http://www.hama.de/portal/articleId*39175/action*2563
Edit: link to the hama site doesn't seem to work, probably because of the '*' in the url. Use copy&paste instead.
Comment by golfdiesel posted on DA* 50-135 67mm lens cap at 30/06/2008 - 04:59
http://www.7dayshop.com/catalog/product_info.php?products_id=99128
Otherwise the website starts asking about a login.
Comment by golfdiesel posted on Strap for a K10/K20 at 29/06/2008 - 18:10
Thanks for the enlightenment on CCDs, Matt. Now I understand where and how the 3008x2000 pixels originate.
But this certainly does not apply to LCDs, where each specified pixel contains three sub-pixels (red, green and blue). So I still think I'm right in assuming that the LCD monitor of 21 kPixels must have a resolution of about 536x402 pixels, making a 1:1 display at about 5.6x zoom.
You are right about pixels being constructed of 3 subpixels. Those subpixels are sometimes called dots.
There is a lot of confusion about these things especially in camera land but the manufacturers give the number of dots and not the number of pixels.
If they would quote the number of pixels then they would most certainly give you the resolution of the screen instead of the number of dots.
They use the word pixels in the wrong way, if they would name them subpixels they would be right.
/Remco
[edit]
I have sent an email to Pentax with the question if they could clarify this once and for all...
[/edit]
Comment by golfdiesel posted on 100% on the LCD at 03/07/2008 - 07:40
From where did you get 320x240 pixels? This yields only 76800 pixels, while the specifications state 210000 (some places 215000). I would expect the ratio is more like 536x402 (=215472), but I have not been able to find these figures anywhere.
In short, the number of pixels they mention with camera's are the combined total (all subpixels). This calculation is based on the approx 230k pixels mentioned for the K20D.
Each pixel has three subpixels side by side so you end up with:
960x240 = 230.400 pixels.
See it like the CCD or CMOS in your camera which doesn't have 6, 10 or 14,6 million full colour pixels. 50% of the pixels are green, 25% blue and 25% red. (the primary filter that is, a CCD/CMOS can only detect light levels).
There is a lot of interpolation done to give you 14,6 million full colour pixels.
[edit]
actually we have call them dots, the lcd has 230.000 dots which account for 76800 pixels.
[/edit]
Comment by golfdiesel posted on 100% on the LCD at 02/07/2008 - 12:53
The display is 320x240 which is a 4:3 ratio and the image is 3:2.
So 1:1 magnifaction in the horizontal pane would be 14,6 times for the K20D.
Vertical it would be 12,9 times for the K20D.
Or am I wrong about this.
Pixel by pixel viewing might be the most accurate way of viewing but then we would fall into the pixel peeping category.
Did you view your photo's at the grain level when shooting film? No you judged the image when it was printed at the desired size... That is what you should do.
Comment by golfdiesel posted on 100% on the LCD at 02/07/2008 - 09:44
Er, so does that mean you agree with me, golfdiesel?
EM
Comment by golfdiesel posted on 100% on the LCD at 30/06/2008 - 13:17
Just to put a cat amongst the pigeons, does anybody know the pixel structure of the K10D LCD panel? LCD manufacturers often include all sub-pixels (typically red, green and blue) in the pixel count.
So a count of 210,000 pixels could actually mean that there are 210,000 sub-pixels, with only 70,000 pixels. Assuming 1.5 aspect ratio, this gives a screen of 216x324 pixels, and a corresponding magnification factor for 100% of x12.
EM
http://www.dpreview.com/reviews/nikond300/page3.asp
Below you can see a real-life, same-size example of the difference in resolution between this new 921,600 dot screen and a more typical 230,400 dot screen (in this case on the Canon EOS 40D). Both cameras were set in play mode with the same image (note that the D300 doesn't use the whole screen in play unless you magnify), a shot was taken of each camera from the same distance (hence the screens were captured at the same magnification).
They talk about dots as in subpixels. So the D300 has a 640x480 pixel screen which accounts for 1920x480 subpixels which equals 921.600 dots.
The EOS40D has a 320x240 screen which gives 960x240 subpixels and that gives a grand total of 230.400 dots.
This would make a 14,6x magnification needed for a 100% crop on the K20D.
Comment by golfdiesel posted on 100% on the LCD at 29/06/2008 - 20:24
And to make things more complicated, isn't it showing the embedded small JPG when you shoot in RAW?
This JPG image is of a smaller resolution if I am right.
That would mean that the best view of the picture you've just taken is only available when you shoot in JPEG.
Please tell me this isn't so...
Filesize: 15.388,6 KB
Thumbnail dimensions: 160x120 pixels
Thumbnail size: 7074 bytes
Additional Image size: 4672x3104 pixels
Additional Image size: 1138923 bytes
The question is, does the camera use the full resolution but highly compresses embedded JPG (1mb for a 14,6MP image) or does it use either the full JPG when you shoot JPEG or the RAW file when shooting RAW.
[edit]
wait there is more information....
In the manufacturers note there are entries about a preview image size and length (dimensions and size are 640x480 and 27082 bytes)
Why is there so much extra information embedded in the RAW file?
[/quit]
Comment by golfdiesel posted on 100% on the LCD at 29/06/2008 - 18:19


Ah well it will take me some time to fully utilise the potential of the K20D. I am still amazed on how much options this unit has.