George Lazarette

Joined: 14th January 2004

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

George Lazarette
The best affordable MF Pentax was the Super A. As John says, all the merits of the ME Super, plus shutter priority, full auto, and TTL.

G

Comment by George Lazarette posted on All the "M" Well almost (before the hammer falls) at 10/04/2008 - 10:20

George Lazarette
Quote:
I really think issues with the focus should be separated from issues with the lens and issues with noise.

As always, 'real-life' pictures are hopeless for finding out exactly where the camera is focusing.

Download the focus test chart, set it up properly, with the camera on a tripod, eliminate shake by using the delayed mirror-up release and find out where it's focusing for sure.
Quite agree. When in doubt, investigate the most likely cause first - human error.

Is the camera set to focus on the centre only? If not, it should be.

But I really can't believe the noise. Was it exposed properly?

G

Comment by George Lazarette posted on Not sharp at 30/04/2008 - 08:01

George Lazarette
Quote:
I'm jumping on the band wagon!....I have just bought a K20 and find the images very soft!....I do alot of macro work and it just doesn't seem up to the job!...I upgraded from a ist ds,which was a superb tool for macro shots coupled with a Tamron 90mm!..........I may have to start fiddling with settings to sharpen things up a bit ,but I'm not a happy ,as I feel I shouldn't have too!...........Ken
You should have to. This is not a point and shoot camera. It's a sophisticated tool designed for photographers.

However, it is possible the camera or lens is faulty. If you suspect this, take them back to the shop.

G

Comment by George Lazarette posted on Not sharp at 29/04/2008 - 19:19

George Lazarette
Mongoose, you are fast becoming a master of clear and concise elucidations of often complex questions.

Can we assume an academic career awaits you?

Keep it up, prof.

G

Comment by George Lazarette posted on Metering modes - not much difference ? at 09/04/2008 - 18:48

George Lazarette
If a camera packs up while you are in the middle of a shoot, it's nice to have an identical back-up camera.

So get another K10D, and the money saved can go towards the 31mm Ltd. Or the 77mm if you like to shoot portraits. You have enough zooms.

G

Comment by George Lazarette posted on Second Body Advice at 09/04/2008 - 07:57

George Lazarette
Quote:

http://www.drmikewebb.com/Ph34mm_8_250.jpg

..... and no you really don't need to know why I have a diver's bottle by the front door (indeed it's more fun guessing especially as I don't go diving).

We know you don't go diving. If you did, you wouldn't leave the bottle by the front door, and you'd have more confidence in the quality of the air inside it.

So why is it there? My guess is that in your spare time you are an entertainer at childrens' parties, and need a good way to blow up balloons.

G

Comment by George Lazarette posted on Tamron 17-50 at 14/04/2008 - 20:42

George Lazarette
I've never used the lens, but at the price it's not a catastrophe if it's no good. And with luck it should be quite nice.

G

Comment by George Lazarette posted on Sometimes I don't get ebay ;) ??? at 10/04/2008 - 14:22

George Lazarette
Quote:
While on the subject could anyone tell me if this Vivitar is any good?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=270227381720

I can have it for around £35 delivered .. worth buying to play with while learning to use the camera or not?
You are a brave man to publish an Ebay auction that you are watching.

This looks to me like the variable aperture 2.8-3.5 lens, not 2.8 as the lister states - but I could be wrong.

He also doesn't say whether it is a K or a Ka lens. I should seek clarification on both points.

But if it is one of the original Series 1 Vivitars, then it should be pretty good. However, probably not better, or significantly better, than the new DA 50-135, or any other decent modern lens.

Zoom lens design has improved a lot over recent years, and the best lenses of yesteryear are no more than good today.

My advice: French reds; New World whites. Old primes; new zooms.

G

PS: But new primes if you are not on a budget.

Comment by George Lazarette posted on Sometimes I don't get ebay ;) ??? at 10/04/2008 - 10:16

George Lazarette
Update.

Well I fnally got it working with Tight VNC (having also tried Ultra and Real).

I settled on Tight because it had proper documentation, unlike the others.

However, the reason for the failure to work was that I also have another (proprietary) VNC prog on the computer, installed so that I can access a PC at a client's office in London. It is dedicated to the client's system, and no use for my local network.

Despite turning the client's VNC off, the various new VNC progs failed to work. I discovered eventually that the router stores the VNC information somehow, and refuses to allow another VNC instance to operate. The trick is to switch off the router, and start again.

Nowhere, in any forum or documentation, did I find any reference to this.

Anyway, it's working now, and thanks again for all the suggestions.

G

Comment by George Lazarette posted on OT. New computer - need to access old computer at 12/04/2008 - 14:31

George Lazarette
Quote:
Quote:

What I really need is a method to hack the registry.
There are some nice tools on www.sysinternals.com
There's a registry viewer and file viewer that show what keys and things are being accessed by any (or all) applications.

Some applications are stupid and just put the keys in a simple file. If the software is worth its salt then the key will be encrypted somehow.

And Googling, there are packages that will show you the product key:
http://www.nsauditor.com/product_key_finder.html
(Premier and Quickbooks included )

And this: http://www.adobeforums.com/webx?14@@.3c053074

There are also some MS tools at www.nirsoft.net

Hope that helps!
Matt
Thank you, Matt. I think I will persevere for the moment (when I have a few moments, or rather, a couple of hours) with getting UVNC to work.

Then, at leisure, I will try and find out how to get the progs onto the new pc. The drive on the old one is more than three years old now, and won't last for ever.

Thanks very much to all who have made suggestions.

G

PS: I hate new computers. It always takes a month or more to get them working properly.

Comment by George Lazarette posted on OT. New computer - need to access old computer at 09/04/2008 - 07:53

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo