geclinke

Joined: 20th September 2008

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

geclinke
Couple of points;

The Ewa Marine housings do work, I've got a UAX which I've used many times, and it's been great (touch wood). At the surface it can be inflated after it's sealed, meaning it maintains shape and bouyancy at depth. I believe the deeper models they make are simply larger in volume so can hold more air to combat compression. It looks a bit odd at the surface, as the housing is blown up like a balloon, but it works.

I found the Diveross housings for sale in Italy for about 780 euro. I would have got one but a couple of things put me off - can't find a review anywhere, I'm not convinced a "one size fits all" housing will really allow proper access to all functions.

As a backup we've got a Canon (sorry) S90 with Ikelite housing, which is good for 60 meters, and custom to the camera. The S90, and all of the ikelite equipment cost less then the price of just the diveross housing. I think c.£200 on a Ewa Marine housing is worth it, to find out whether it's a hobby you really want to take up. If there were more information / reviews about the Diveross, I'd buy one. For the moment I'm happy with the Ewa Marine housing. Hate to say it, but for anyone without a professionals budget, the cheapest way into underwater SLR photography is probably Olympus. If the Diveross housing works, that would change things, as it's a relative bargain.

Final note, for anyone wanting to take the plunge with their camera - make sure you've got insurance which will cover you against equipment floods.

Comment by geclinke posted on Underwater Photography at 30/08/2010 - 13:40

geclinke
As far as zooming, one technique I've used with a flexible housing is pulling and pushing the front element. Absolutely not something I'd advocate on a good lens, but I'm not that fussed about doing it with the kit lens....

Comment by geclinke posted on Underwater Photography at 29/08/2010 - 13:59

geclinke
Also, if you really want a solid housing, then this is the most cost effective option; Diveross.

It's not that easy to find it for sale though, and there aren't many (any) reviews for it yet.

Comment by geclinke posted on Underwater Photography at 28/08/2010 - 17:21

geclinke
I've taken my K200D underwater quite a few times, there's ay least one picture in "My Portfolio".

The most important thing when taking photographs underwater is to get as little water between you and the subject. That means as short a focal length lens as you can get your hands on.

Most importantly though, the housing. I looked around at specialist housings, and they're very expensive - for something which may not be used that often, e.g. upwards of £1000. I settled on a Ewa Marine flexible housing. There are a number of options for different depths (easily enough to cope with the PADI depth limit).

Pentaxophile is right about the 16-45, it's physically longest at the 16mm focal length - that's going to cause a problem with any housing.

You might want to consider an underwater filter (red or magenta depending on water colour) if you're going to be deeper than about 10 metres.

It's also good to have the option of a flash. If you're diving in clear water then you're unlikely to get back scatter, and you'll have good results. If you're diving, or snorkelling, close to land / seabed then there's likely to be a lot of sediment - which is a pain to remove in post production.

A fast prime might be useful for a night dive, but otherwise the 18-55 is perfectly adequate I would think.
Personally I don't think it's worth going crazy on the lens, unless you've got a professional housing, with an optically matched dome housing.

I'm going on a trip soon, where I'm going to try out a polarising filter too, as it may add contrast. I'll report back if any of my other lenses get used.

EDIT: This photo's better link

Comment by geclinke posted on Underwater Photography at 28/08/2010 - 17:09

geclinke
Good luck on the course. I did it last October, and found it really useful. I only got Elements v.6 as a freebie though...

Comment by geclinke posted on OU Course update at 28/08/2010 - 12:42

geclinke
They still have that screen option listed on the Dell UK website. I don't think it shows up very often in retail outlets though.

Comment by geclinke posted on Which one would you choose? at 24/08/2010 - 21:36

geclinke
Get a Studio 16 XPS, with an RGBLED display, and 256GB SSD. Best screen you'll find on any laptop, and performance (with an i7) will outpace anything from Apple, for the money.
I bought one, and would definately recommend it.

Comment by geclinke posted on Which one would you choose? at 24/08/2010 - 20:21

geclinke
Good point, had a look and it might work - I'll need to try it in person to see if the housing mount can screw onto the lens.
I think I might need to do a little saving, or ebay trawling, first - I was a bit shocked by the £600 price tag...

Comment by geclinke posted on Short lens with 72mm filter at 24/07/2010 - 13:27

geclinke
Yep, should have said I meant short focal length rather than physical length. Maximum length in the housing is 170mm. Might be a tight fit with 125mm of lens fitted to the camera.
Does the lens focus internally? Water pressure can put undue strain on the AF system if the front element is moving backwards and forwards.

Comment by geclinke posted on Short lens with 72mm filter at 20/07/2010 - 21:20

geclinke
Afer looking a bit harder, I've found a useful page for filter sizes link.
Seems like my only option shorter than I have now is a 16-45mm - is this going to be noticeably better quality than my 18-55mm kit?

Comment by geclinke posted on Short lens with 72mm filter at 20/07/2010 - 20:47

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo