foringa

Joined: 4th November 2008

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

foringa
Daniel Bridge wrote:
foringa wrote:
Yes thats the one Ihave been using, but you also mention an OP to be on maual. Whats the OP? and does this camera has focus assistance?
Sorry, 'OP' is forum speak for 'Original Poster', the person who asks the original question, which was you.

I said "It could be that the OP has a manual focus lens on". I meant you might have a manual lens mounted on your camera, but have the camera set to autofocus, in which case it wouldn't take the photo until it thought the horses were in focus.

Still trying to think what could be the problem.

Okay, another thought. Could the sun be shining on the laser detector? Just wondering if this could be enough to delay the triggering slightly?

Is there any pattern to the shots that are wrong? For example, are the horses always on one side of the track rather than the other, is it later in the day rather than earlier?

Dan
The laser detector has a sensetiviti knob for suny or cloudy and it only works when its set otherwise wont work and I have a red light on it wich tells me that laser and detector are set ready to go.

Now on Saturday 15th am going to have some reces and am going to try it again and I will come bak to the forums to let you know how it work out.

Comment by foringa posted on Could someone help an amateur with apentax 200k please at 04/11/2008 - 11:24

foringa
Father Ted wrote:
Here's a thought...
Are you always getting an image of a horse, but sometimes just the rear, sometimes the front?

If so, is the image crisp?

If so, what lens are you using? Is it the kit lens?

Would you be better with a wide angle prime, so the horse would remain in the (now larger) frame?

I don't know if this would be better, just my thoughts.
Am setting the camera with the two poles straith at eachother so when the picture is taken there are no agles on the finishline and the nose supuse to be just on the finish line but some times is like that and some times I some how get delay from the camera and at the finishli I ge half of the body or so.

Comment by foringa posted on Could someone help an amateur with apentax 200k please at 04/11/2008 - 10:56

foringa
Clarky wrote:
Heres a link with some info

link
That link you send me I have seen that camere and called the company but is around 60,000 dollars and just to rent it is 6,000

Comment by foringa posted on Could someone help an amateur with apentax 200k please at 04/11/2008 - 10:51

foringa
gartmore wrote:
I've remebered how the film cameras worked, the film was moving past the shutter at roughly the same speed as the horses giving you a pin sharp image with static objects in the background all streaky.

Given just how specialised this business is and just how much might be riding on an accurate result(terrible pun, I know) and especially in light of Clarky's link above, I really think your camera is 100% the wrong tool for the job.

And, I'm sorry to say, this kind of work might better be undertaken by a specialist professional.
The person who does this in Mexico uses an older canon not to old bu he is acurate on the pictures and he said that my problem has to do with settings on my camera.

Comment by foringa posted on Could someone help an amateur with apentax 200k please at 04/11/2008 - 10:36

foringa
Mannesty wrote:
What exactly are you using to trigger this camera. In your first post you say it's a laser line (which I've assumed to be a device employing laser light). In another post, you say it's a piece of string.

I'm confused, have I missed something?
No Sr. the string line was another triggering device wich does not work accurate.
I use laser ligth on one side and a detector on the other wich when the laser is block by horse it sends the signal to my camera acting as a shutter release cable.

Comment by foringa posted on Could someone help an amateur with apentax 200k please at 04/11/2008 - 10:33

foringa
Daniel Bridge wrote:
foringa wrote:
Yes the lens has an auto focus.
How I turn off the one from the camera?
There is a switch on the camera body, looking from the front, it's bottom right of the lens mount, and this should be set to 'MF'.

Dan
Yes thats the one Ihave been using, but you also mention an OP to be on maual. Whats the OP? and does this camera has focus assistance?

Comment by foringa posted on Could someone help an amateur with apentax 200k please at 04/11/2008 - 10:26

foringa
Mannesty wrote:
If the camera is set to totally manual operation and is not in power save (turned off) mode at the time it is triggered, the results should be consistent.

You'll need to set manual focus, manual shutter, manual aperture, and make sure the camera is on at the time the horses cross the finish line.

This all assumes that it is the camera set-up causing this, have you had the laser trigger device checked?
Yes I send it back to the manufactur. And besides the settings you mention to be total manual, Is there any other settings that I need to turn on or off?

Comment by foringa posted on Could someone help an amateur with apentax 200k please at 04/11/2008 - 10:03

foringa
Yes the lens has an auto focus.
How I turn off the one from the camera?

The laser is at 39 inches right on the bottom of the neck of the forse ant on top of the legs, so triggers same because the movement of nose goes with it same distance.

Comment by foringa posted on Could someone help an amateur with apentax 200k please at 04/11/2008 - 09:54

foringa
Yes the camera is set to manual focus on the on/off under the lens.

And the string line across the track I have done it before is just a string line wich on the side where the camera is place has a micro switch that sends the signal to the camera acting as a cable shutter release when the horses pass true the string line but this work by pounds of preassure and is not accurate and I was using another camera that I barrow wich settings where alreadyconfigure and now I bought this pentax 200 d and am having trouble seting the camera to take the pictures at same shutter lag.
Am very amateur with cameras naybe is me that is doing some settings wrong but am kind a frustraded and all confuse now and I will like to start all over with new settings that someone else could tell me wich ones to use or wich ones to turn on ro off.

Comment by foringa posted on Could someone help an amateur with apentax 200k please at 04/11/2008 - 09:46

foringa
The shutter speed it has been set same 1/4000 every time.

What do you think about resetting the camera to factory settings and then start with new settins on manual, if so could you recomend me wich settins to turn on or off and wich ones to use?

Comment by foringa posted on Could someone help an amateur with apentax 200k please at 04/11/2008 - 09:23

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo