BODYHEAT

Joined: 27th May 2009

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

BODYHEAT
Gwyn wrote:
Soorry Bodyheat, I don't know how much printer cartridges are in the UK but I can get official HP ones here in NL for less than your friend is offering them.
I don't know about HP or whether your printer needs several cartridges, but mine does

All I know is that a set of five cartridges for my Canon would cost me £75 +/- (Average £15 each) and from him I get generics which cost me £10-15 for the set (average £3 each).

I guess that's why the Americans call the UK Treasure Island, because they can make their fortunes selling to us and we get ripped off all the time. Look at the new K7: $1200 in the US and £1200 in the UK...typical

Comment by BODYHEAT posted on Recommended suppliers of equipment at 18/06/2009 - 16:34

BODYHEAT
morelia wrote:
He does not do cartridges for my printer, Canon Pixma 970
If you do a LOT of printing, my honest advice is that it is better to ask him what printers he CAN supply cartridges for and get one of those. You will save a fortune. Save your Pixma 970 for the small stuff but anything you'll use a lot of ink with you are better off spending £50-£100 on a new printed he can support and buying from him

The printer companies make all their money on the cartridges and sell the printers now almost as loss leaders as bait so you get forced to used their expensive cartridges.

Comment by BODYHEAT posted on Recommended suppliers of equipment at 18/06/2009 - 16:10

BODYHEAT
iceblinker wrote:
TonyM wrote:
Pete - does the compromise really work? Given that we are told to turn SR off when using tripods, that tends to imply "wrong" SR can be as bad as no SR? I've been put off buying manual zooms because of this.
I've yet to see evidence of it yet, but yes in theory "wrong" SR can be as bad or worse than no SR. You could turn it off altogether when in doubt, and that won't matter when you can use a fast-enough shutter speed.

There are other reasons for avoiding manual zooms, though. They tend to be larger and heavier than more modern zooms, and the optical quality is rarely better. This is not so much the case with primes. The best value-for-money combination I reckon is old primes and modern zooms.
I only have one 'classic' zoom which is the 80-200mm and although slower than modern zooms and maybe heavier construction I got a lot of use out of it back in the day and there's nothing wrong with it optically. I have always had a steady hand and except in low light very rarely had problems handholding all but the largest lenses at slow speeds - it's just practice I suppose, but SR makes it even easier.

The other zoom is Vivitar Series 1 A lens which I bought in Hawaii in 1989 as a walkaround lens since it covered most lengths I felt I would need and it is a very clear sharp lens and is a very good dogsbody. Like all my kit it's been in snow and on beaches and deserts...never had any issues and of course the LX was weatherproofed before they invented the term I expect - gasket city!

Comment by BODYHEAT posted on SMC K (fully manual) lenses on K20D at 18/06/2009 - 13:03

BODYHEAT
stevejcoe wrote:
On the K10 I only use M and K series lenses in fully manual mode. In AV mode the camera will only shoot at the widest aperture, irrespective of the aperture set on the lens.

The procedure I use is this:

1. Set camera to manual and then set aperture on the lens
2. Compose and then press the green button (note the camera meters early lenses at the widest aperture, pressing the green button stops the lens down to the aperture that you set and then meters at that aperture. The shutter speed is set and will remain at that speed until the shutter is fired. The set aperture will not be seen (F--but the shutter speed will be indicated)
3. Shoot.

Regarding SR
1. Do not use on a tripod
2. On a manual zoom I usually set somewhere in the middle of the range and it works reasonably well.

Regarding exposure
1. Exposure moves from under to over (eg F1.7 - F22). The amount seems to vary slightly with the lens in use, but I usually find from wide open to F5.6 acceptable. I only shoot in RAW, and correct as necessary in post processing.

2. If this is a concern and you would rather bracket, then certainly set up the USER profile in manual mode with bracketing set up at say 1/2 stop either way.

Hope this helps - Steve
STEVE, BRILLIANTLY CLEAR AND UNDERSTANDABLE!

So setting the focal length is only needed for the SR function, and no other reason? i.e. irrelevant on a tripod with SR switched off

So, if I have got this right:

A lenses are fine with AV mode but K and M lenses are probably better suited to MANUAL mode.

Can the manual settings be stored somehow as a USER profile or I guess each one is different depending on the lens?


many thanks everyone

Comment by BODYHEAT posted on SMC K (fully manual) lenses on K20D at 18/06/2009 - 11:43

BODYHEAT
This has probably been dealt with elsewhere but I am not sure where so here goes.

I have had an LX and K2 since 1981 and only ever used manual lenses - K and M lenses. I only have one with an A setting so they all predate autofocus - in fact anything 'auto' at all pretty much apart from a new digital lens I received with my K20D.

I just want to make sure I set the camera up right for correct metering with old SMC K and M lenses without an A setting.

I have changed the setting near the lens mount to MF for manual focus and set the custom setting to PERMITTED. I entered the focal length where asked, although this is rather arbitrary if you are using a 80-200mm zoom - which focal length do you input? Or if you are on a tripod and just using one focal length of the zoom, do you just input that length?

Although I still get the flashing F, yet it lets me take shots.

I gather I can then shoot in either AV or MANUAL modes (and USER presumably since that is just a preset you ccreate?) and manually focus my lens and still get focus confirmation. Of course the LX has the brilliant OTF metering so it measures the exact amount of light energy reaching the film plane and adjusts accordingly.

What do I need to look out for in the K20D metering with manual lenses? Is it likely to underexpose? Should I set it up to bracket automatically, or should I increase the EV on all pictures by a stop to make sure? I am not clear on how to set it up correctly (and then save the settings presumably as a USER profile) so that I can use the old lenses without screwing up shots.

If this has all been answered elsewhere please direct me to the thread.

thanks in advance

PS Interestingly I once I was shown, I found the K7 very easy to use with an old lens. Maybe the K20D is the same, but I just need to make sure I am doing it all correctly

Comment by BODYHEAT posted on SMC K (fully manual) lenses on K20D at 18/06/2009 - 11:01

BODYHEAT
personally I have never heard of this lens and can't understand why you aren't using the kit lens that came with your camera. It has to be better surely? And then you wouldn't be having concerns about exposure etc and at the long end (55mm) would give the same coverage more or less as an 85mm portrait lens on a 35mm slr. It might be slightly slower but just make sure you have adequate light...maybe take the portraits outside instead of indoors?

Comment by BODYHEAT posted on Hello + quick question about a lense please! at 18/06/2009 - 08:06

BODYHEAT
Traditionally lenses in the 85mm range were great for portraits (head and shoulders) whilst those in the 120mm range were great for headshots only (obviously divide by 1.5 to translate this to digital due to the smaller sensor size to get the same coverage).

Use a lens much longer than this and it will foreshorten everything it sees and 'squash' your subjects' faces and noses (although this is great if they have long noses and you want to make them appear shorter )

Comment by BODYHEAT posted on Hello + quick question about a lense please! at 18/06/2009 - 00:55

BODYHEAT
Danny, does the latest firmware enable autofocus in video mode or do you think this is deliberately disabled to avoid AF motor noise being picked up by the internal microphone (like Canon's 500D apparently does)

Comment by BODYHEAT posted on I've got a K-7 to play with for 2 weeks!! at 18/06/2009 - 00:37

BODYHEAT
Flying will be the next firmware update after MP3s, video calling and doing the washing up

Comment by BODYHEAT posted on I've got a K-7 to play with for 2 weeks!! at 17/06/2009 - 23:07

BODYHEAT
Makes you wonder if some people would be more happy if Pentax didn't innovate and bring out new well specified models.

Whichever way you look at it, whether you feel you need or want one or not, or whether you can even afford one, it has to be a good day for the brand. The K7 is a great camera and will elevate Pentax in many people's eyes. Why knock the company for coming out with a newer model with features you hadn't thought of or cared for? Praise them, even if the model is not for you

Comment by BODYHEAT posted on I've got a K-7 to play with for 2 weeks!! at 17/06/2009 - 11:42

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo