Arthur Dent

Joined: 25th July 2005

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

Arthur Dent
Quote:
Be very wary of the Pentax A 70-200 - it is not SMC and was sold in the mid-80's when Pentax decided they needed a dirt-cheap tele zoom, so rebranded the old Takuma.
Alan
Well, that explains the non-SMC 70-200's floating around. If you get one, make sure it's SMC.

The one I have must be the 70-200. I just know I had to avoid the non-SMC version.

Comment by Arthur Dent posted on 70 210MM pentax vs vivitar at 21/02/2007 - 00:51

Arthur Dent
When looking for a 70-210 f/4, make sure you get the SMC version. Apparently there were some 70-210's without the coating, and that's a problem.


I use SMC-A 70-210 on both my digital cameras. It's a good lens.

Comment by Arthur Dent posted on 70 210MM pentax vs vivitar at 15/02/2007 - 18:35

Arthur Dent
Quote:
A colleague of mine will shortly be visting America for a couple of weeks.

Can anyone based in America tell me if it is worth asking him to buy a genuine Pentax DL-150 battery for my K10D ?

At £49 in the UK, they seem a ridiculous price, but they might be just $49 across the pond.

A search on Google has not revealed much about American prices.
B&H in New York has a "house brand" specifically for the Pentax for a lot less than the "penatx" branded one. Probably half of what you'd pay for the "penatx" decal on the battery.

I have one of each, they're both fine.

Comment by Arthur Dent posted on Stupid K10D battery prices at 01/04/2007 - 13:33

Arthur Dent
Welcome to the forum!

Full sunlight on medium gray rock means that the "sunny 16" rule applies. If you set the lens to f/16, use a shutter speed that's the inverse of your ISO. (i.e. at ISO 100, shoot at 1/100 second at f/16, or an equivalent combination).

Since it's always sunny on the Moon (barring eclipses) you probably don't even need a meter. I didn't when I used film, but I haven't taken any moon shots since then.

Comment by Arthur Dent posted on newbie wants help with shooting moon at 23/01/2007 - 13:40

Arthur Dent
I have A3 size prints from the D, so as far as I'm concerned the image quality is sufficient for most purposes. If I'm making a huge print, like 16x20 or 20x24, then the K10D probably would show a difference.

probably.

Comment by Arthur Dent posted on K10D image quality v.s. istD at 23/01/2007 - 13:50

Arthur Dent
It's now out on the Pentax USA site. I presume it's also out on the other sites.

In fact, it is. Go to http://www.pentax.co.uk/_uk/photo/products/index.php?cameras&gruppe=digital%20slr&produkt=19095&id=downloads
and take a look!

Comment by Arthur Dent posted on Any news on the K10D firmware update ?? is it out tommorrow? at 23/01/2007 - 13:30

Arthur Dent
Yes. I can verify that the split prism works down to f/8, and if you move your eye around in the viewfinder and really concentrate, you can probably get away with almost f/11.

At f/5.6, it's clear as a bell. By f/8, you need to pay attention. At f/11, it's kind of dodgy.

Go here to see the screens and pricing.

Comment by Arthur Dent posted on K10D Shutter release inop with A lenses unless in MF mode at 23/01/2007 - 18:12

Arthur Dent
I got the Katz Eye screen, from http://www.katzeyeoptics.com/cat--Pentax-DSLRs--cat_pentax.html and can turn off the autofocus with confidence.

I was actually at the place where they make the screens, and we took a number of different cameras, and sometimes the autofocus coincided with the manual focus, and sometimes not. Even on the same camera. All the manual focus shots were correct.

Comment by Arthur Dent posted on K10D Shutter release inop with A lenses unless in MF mode at 23/01/2007 - 13:35

Arthur Dent
I believe that the new firmware will allow TTL flash. I'm not farmiliar with TTL flash (I still use the original Vivitar 285) but I'm interested in the new flash with tilt and swivel capabilities.

Comment by Arthur Dent posted on K10D and Pentax Flash Gun AF220T at 21/01/2007 - 02:43

Arthur Dent
Quote:
Does any one have any idea what would happen if one tried to apply the K10d firmware to the Samsung? Does the new firmware patch the old or replace it?

I rather suspect that you'd end up with a dead camera and a huge repair bill for unauthorized hacking

Comment by Arthur Dent posted on Samsung GX10 at Argos! at 21/01/2007 - 02:48

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo