All Forum Comments
Comment by aminstar posted on another moon photo at 03/11/2009 - 20:13
In MF, it just stalls until the red square appears in the viewfinder
When the lever is put to MF position you just manually focus and release the shutter. Why do you want to wait for the square to appear in the viewfinder? That is only for AF by the camera. As far as I know the focusing square does appear in that MF function simply as an aid to let you know that you have manually achieved what the camera thinks is the focusing spot. But you should be able to fire it from any position.
Let me get this clear. Are you really saying that you cannot release the shutter immediately irrespective of the subject being focused or not if the lever is set to AF.C or M?
Comment by aminstar posted on Action photography at 03/11/2009 - 17:34
My previous camera was a Canon, and this had an action setting that allowed me to take pictures of moving subjects.
As suggested it must be an entry level DSLR.
Comment by aminstar posted on Action photography at 03/11/2009 - 13:54
Comment by aminstar posted on Action photography at 03/11/2009 - 11:54
Can someone tell me how to set up my K10 so that I can take shots where there's a lot of movement?
My previous camera was a Canon, and this had an action setting that allowed me to take pictures of moving subjects. Unfortunately, the K10 seems to have no such facility and, if anything moves in the sensor area of the viewfinder, the camera simply refuses to fire. Even if I set to manual focus, the shutter will not fire unless and until something in focus in the frame hits a sensor.
It's even worse when attempting to take flash photos, as I can hold the shutter down for anything up to 3 seconds before the camera will take the shot, and then the moment I wanted to capture is lost .
I can't believe that Pentax would design so dictatorial a camera, so how do I overcome these ridiculous restrictions?
That will allow you to release the shutter without any restriction but it will not guarantee your shot is in focus. That will be up to you to either wait until the subject is either in focus and then you release the shutter or then use Manual to do that, of course you will then have to use manual focusing.
If you mean something like Al-Servo as in canon function then as far as I know there isn't any in the K10 or K20.
But hey, I might be wrong, so someone more experienced here will be able to chip in better
I can't believe that Pentax would design so dictatorial a camera, so how do I overcome these ridiculous restrictions?
I sense a heated debate coming and some chop chop as this thread progresses
Comment by aminstar posted on Action photography at 03/11/2009 - 11:40
Quality of the clip is not that great and a bit boring initially but if you bear with it its hard not to end up having a belly laugh in the end.
Enjoy
Comment by aminstar posted on Dangers of a treadmill :) at 03/11/2009 - 09:28
Enjoy and have a great week
Comment by aminstar posted on One day in Africa as seen by 100 photographers at 02/11/2009 - 08:05
Cheers Tony! I'll be very very very sad to see it go, believe me!!!
BUT another side of me is relieved.
My wife would feel guilty if she knew i'd sold this lens, but the proceeds are going towards a social work course she really wants to do.
That is much more important to me than having a great lens.
At a push we could just about afford it, but I dont want to have the stress of worrying about money. Life's too short!
I'll probably grab it again next year. Or the 60-250.
Comment by aminstar posted on FOR SALE - Pentax smc DA* 50-135mm f2.8 SDM. AS NEW. £550 plus postage at 02/11/2009 - 07:58
Sorry it's still not clear in my mind.
Are you saying that if I set my camera to f4 and ISO 200 at, point A, and then 30M away, at point B, I set up the flash in auto mode, also set to f4, ISO 200 and aimed at a target, point C, which is 3M from the flash but 30M from the camera that I do not have to compensate for the light falloff between the camera and the target?
The flash would have based it's exposure on the reflection from the 3M distance to the target.
Surely there must be drop off in light between the target and the camera which will cause under exposure.
Please be patient
Greg
I am not an expert on this and I have no complicated formula to present. And am rubbish at technical issues, the ones who top the scale on these aspects are experienced guys like Stefan and others as you see here, but if you want a simple straightforward way of doing it just slide all your setups into manual including flash and then try exposing from the distance you want the camera to be. Just use a rock or a dummy baboon if needed be to attempt some shots and try it and find the right settings. You will have much more control rather than putting your flash into AUTO. Its easily manageable, a few trial shots and you will have the subjects pinpointed accurately with that method.
I used to be afraid of manual settings until one of our most experienced members in the flash fields and not only, Mattmatic here convinced me that manual is the way to go. You should get one of his flash manual guides, its a must have aid for great exposures.
How do I know that? Many frustrating hours in the shed puffing coloured smoke and blowing bubbles got me there and now that's all I use, manual
Comment by aminstar posted on Looking for a flash with an iluminated set up screen at 02/11/2009 - 07:52
hold thumbs that the monkeys or baboons don't take off with my flash
Greg
I have lived ther and the sorrounding areas all the way till Mozambique for many years and if there is one thing I have learnt is that monkeys there love to grab anything that capture their attention and that is strange to their sorroundings . If I were you I would tie a rope or something to keep it secured to a nearby tree that I am sure there won't be any shortage of. failing a tree find a heavy stone and tie it in there.
What part of South Africa are you in?
Comment by aminstar posted on Looking for a flash with an iluminated set up screen at 01/11/2009 - 17:49


What 300mm lens did you use?
Those clouds just ruin it I am afraid, unless your intention was really to compose it all with the clouds, in which case you seem to have managed it pretty well