All Forum Comments
Comment by aadixon posted on Worth fixing Non MLU? at 20/03/2014 - 12:19
Comment by aadixon posted on Pentax 6X7 Film Type Dial at 15/03/2014 - 17:01
I downloaded the 67 manual by accident, and just got the 6X7 one yesterday. I started playing with everything to see how it worked, and noticed the film type dial is broken (dial on the right side that sets to 10 or 21),what is there is a set screw with a little thin washer screw thingy that can be adjusted to keep the set screw tight. I'm assuming the switch went on top of this...
Sadly, I've moved the set screw before I realized it was busted (It'll be a miracle if I can get it back to where it was). Now the camera acts funny while winding. Instead of stopping at 15 shots, it just keeps going and going like 220 is in it. The roll I shot like that came out, but it only took 9 photos, and the spacing was off on the last shot. I should also state that even though before I messed with this screw it stopped at 15, but only 10 fit on the 120 film. Assuming that quirk is part of that dial being broken.
I've heard of a guy in TN that repairs Pentax, but I thought I'd give this forum a shot to. I'd like to repair the camera before trying to return it. As is shot fine before I played around with it, although I could have never done 220 film if I never noticed this.
Any tips or thoughts?
-Aaron
Comment by aadixon posted on Pentax 6X7 Film Type Dial at 15/03/2014 - 16:20
If you haven't done it, clean/check the contacts on the 'offending' camera body too.
If the lens works on the K3, but not the ZX-30, then surely the problem lies with the ZX-30, not the lens? The camera was not designed to work with M and K lenses, but should work with A lenses.
What JAK said works if you're using an older K mount lens on the body. The contacts are not working on this SMC A that I got. I've returned it for a full refund last night.
Comment by aadixon posted on A-Ring Question.. at 01/03/2014 - 14:19
Nothing appears broken on it, maybe it was dropped? Who knows.
Comment by aadixon posted on A-Ring Question.. at 01/03/2014 - 01:28
It just confuses me, as an A series shouldn't be doing that, or so I thought.
Comment by aadixon posted on A-Ring Question.. at 01/03/2014 - 00:13
Custom menu 4 - item 27 'Using aperture Ring':
Set this to 2 (enable)
These lenses work from the zx-30 when used on my K3, although they are not SMC A series like the one I'm questioning, but a SMC FA.
Still, according to what I've found online, the A series SHOULD work on both. I guess it's always possible the charts are wrong?
Bleh...I still can't figure out if it's A ring is broken or not though...sorry if what I said isn't making sense.
Comment by aadixon posted on A-Ring Question.. at 01/03/2014 - 00:06
So, I recently got a prime lens online, and according to the charts I've looked up, it should be working. The lens should be working with the aperture on A.
Chart-->http://www.mosphotos.com/PentaxLensCompatibility.html
The lens is the SMC A 50mm 1:2 F2.
My cameras vary, but I bought it to work on the zx-30 (Crippled KAF) and my K-3.
Is this lens not made to work on these bodies, or is something broken inside of it?
-Aaron
Comment by aadixon posted on A-Ring Question.. at 28/02/2014 - 23:30
Comment by aadixon posted on which pentax film body to get? at 23/02/2014 - 02:11
Thanks,
Aaron
Comment by aadixon posted on Looking for a nice 6x7 lens at 23/02/2014 - 02:00



I guess at what point will the camera produce shaky images from not being able to have it locked up?
Thanks,
-Aaron