The Dreaded Fungus
Posted 14/06/2004 - 19:24
Link
Hi Kim
I have a similar problem with a zoom lens, it's getting to the stage where it looks like vaseline in the lens!
Did you have any luck with repairing it? I always thought severe cases were pretty terminal, but it's pretty distressing to have to junk a good lens!
Cheers
Matt
I have a similar problem with a zoom lens, it's getting to the stage where it looks like vaseline in the lens!
Did you have any luck with repairing it? I always thought severe cases were pretty terminal, but it's pretty distressing to have to junk a good lens!
Cheers
Matt
Posted 14/06/2004 - 19:47
Link
Optical glass is quite soft and delicate, and the fungus can actually eat into it.
Cleaning is expensive so it needs to be avoided wherever possible.
Cleaning is expensive so it needs to be avoided wherever possible.
Best regards, John
Posted 15/06/2004 - 08:42
Link
Hi Mattie,
I found a couple of firms who would service the lenses. Mine only had a very light case of fungus and they said it could be worth doing. In reality thought the cost was going to be about £25 or more plus P&P. At this price, I didn't feel it was worth doing bearing in mind the cost of secondhand screwfit lenses these days. I would say your lens sounds pretty terminal.
Regards
Kim
I found a couple of firms who would service the lenses. Mine only had a very light case of fungus and they said it could be worth doing. In reality thought the cost was going to be about £25 or more plus P&P. At this price, I didn't feel it was worth doing bearing in mind the cost of secondhand screwfit lenses these days. I would say your lens sounds pretty terminal.
Regards
Kim
Posted 15/06/2004 - 13:17
Link
Hi Kim,
I would be interested in the companies you have found. I have an old K mount SMC85-210, in perfect condition with dedicated hood and case which has just started to show signs of some fungus. Its a bit of a monster of a lens by current standards but is not that common so I would like to do what I can to save it as a working part of my collection rather than an ornament!
Regards
I would be interested in the companies you have found. I have an old K mount SMC85-210, in perfect condition with dedicated hood and case which has just started to show signs of some fungus. Its a bit of a monster of a lens by current standards but is not that common so I would like to do what I can to save it as a working part of my collection rather than an ornament!
Regards
Stephen
Posted 18/06/2004 - 14:12
Link
Hallo...
I have the same problem as Kim. I have fungus on the second element. It is just a big dot for now but it's disturb me. I was thinking if I can just unscrew the first element (first lens) and clean the fungus off with the small piece of cloth and the lens cleaner? What can go wrong? Perhaps someone things that this is a stupid idea but I have look the lens from all sides and it seems that the first element (lens) is screw on the lens pretty much just like the filter is. So, when the first element is unscrewed the second element (with fungus) can be cleaned within the range of possibility...
Am I mad or this is possibility to save some money???
Have a damn good week-end and good luck - Saso
I have the same problem as Kim. I have fungus on the second element. It is just a big dot for now but it's disturb me. I was thinking if I can just unscrew the first element (first lens) and clean the fungus off with the small piece of cloth and the lens cleaner? What can go wrong? Perhaps someone things that this is a stupid idea but I have look the lens from all sides and it seems that the first element (lens) is screw on the lens pretty much just like the filter is. So, when the first element is unscrewed the second element (with fungus) can be cleaned within the range of possibility...
Am I mad or this is possibility to save some money???
Have a damn good week-end and good luck - Saso
Posted 18/06/2004 - 15:14
Link
Hi Saso,
Give me a day or so. I have a link somewhere that gives a guide to taking lenses apart. I will post it here. If the lens has got fungus, quite often a replacement secondhand is cheaper than a repair. In this case you may as wel have a go. If it goes wrong, you won't have lost anything. To remove the front element, you may need to make a special tool. This is basically a circle just smaller than the fliter thread backed by rubber and mounted on a post so you can apply pressure to remove the ring without damaging the lens. It's in the guide somewhere (when I find it)
Regards
Kim
Give me a day or so. I have a link somewhere that gives a guide to taking lenses apart. I will post it here. If the lens has got fungus, quite often a replacement secondhand is cheaper than a repair. In this case you may as wel have a go. If it goes wrong, you won't have lost anything. To remove the front element, you may need to make a special tool. This is basically a circle just smaller than the fliter thread backed by rubber and mounted on a post so you can apply pressure to remove the ring without damaging the lens. It's in the guide somewhere (when I find it)
Regards
Kim
Posted 19/06/2004 - 12:14
Link
Hi Saso,
I found the link. It is
http://www.kyphoto.com/classics/articles.html
there are several articles on lens repair.
Have Fun and let us know how you get on
Kim
I found the link. It is
http://www.kyphoto.com/classics/articles.html
there are several articles on lens repair.
Have Fun and let us know how you get on
Kim
Posted 22/06/2004 - 14:20
Link
Hi Kim & the rest of the Pentax gang!
First, thanks for the link Kim. It helped me to see the tools that is necessary for the lens repairs. I have made my own varianta of it. It looks like something unfinished but it is work well. I was manage to unscrew the ring which fix the front element to the lens on two zooms and clean the fungus from both but the 50mm was a tough not to crack. I was not able to unscrew the ring to the end because it has stuck somewhere in the middle. Now it won't go either forward or back. And I must say that I scratch the ring pretty bad. Now it looks like sh***. But fortunately the lens stays intact. Well, this one is going to see the repairman
What can I say for the end? I have learn a great deal about the lenses and cleaning of them.
I could say that many things have happened in between. The most important thing: I became a FUNGI-NATOR!
look out you fungies: "I'LL BE BACK!"
Have a nice day and youre camera ready...
Saso
First, thanks for the link Kim. It helped me to see the tools that is necessary for the lens repairs. I have made my own varianta of it. It looks like something unfinished but it is work well. I was manage to unscrew the ring which fix the front element to the lens on two zooms and clean the fungus from both but the 50mm was a tough not to crack. I was not able to unscrew the ring to the end because it has stuck somewhere in the middle. Now it won't go either forward or back. And I must say that I scratch the ring pretty bad. Now it looks like sh***. But fortunately the lens stays intact. Well, this one is going to see the repairman
What can I say for the end? I have learn a great deal about the lenses and cleaning of them.
I could say that many things have happened in between. The most important thing: I became a FUNGI-NATOR!
look out you fungies: "I'LL BE BACK!"
Have a nice day and youre camera ready...
Saso
Posted 22/06/2004 - 17:45
Link
Hello fellow Pentax Users,
Thanks for that link Kim, I am yet another mad, impetuous fool who is going to attempt to clean a fungied lens, but after all is said and done it is either that or to bin it. And thanks to Saso for sharing your experience with us - it made made me as it sounded so familiar to my experiences in the past where early confidence gives way to panic and then hopelessness. Next time I will take digital pictures of each stage of dismantling so I break my cycle of always ending up with an extra 'bit'!
I recently sent a Pentax-M 100mm f/2.8 lens off to be cleaned but the fungus had eaten in to the lens coating on the rear element and was beyond help. Now I presume that unless the area of fungus is very light and recent then there is no help to be had. Maybe we need a swap shop of lens elements that are fungus free and can be traded... Crikey! I will have about 50 elements or so from my fungied lenses. I hate throwing lenses away especially the ones that look like they have never been used!! Disheartening.
All the best,
spbatt
Thanks for that link Kim, I am yet another mad, impetuous fool who is going to attempt to clean a fungied lens, but after all is said and done it is either that or to bin it. And thanks to Saso for sharing your experience with us - it made made me as it sounded so familiar to my experiences in the past where early confidence gives way to panic and then hopelessness. Next time I will take digital pictures of each stage of dismantling so I break my cycle of always ending up with an extra 'bit'!
I recently sent a Pentax-M 100mm f/2.8 lens off to be cleaned but the fungus had eaten in to the lens coating on the rear element and was beyond help. Now I presume that unless the area of fungus is very light and recent then there is no help to be had. Maybe we need a swap shop of lens elements that are fungus free and can be traded... Crikey! I will have about 50 elements or so from my fungied lenses. I hate throwing lenses away especially the ones that look like they have never been used!! Disheartening.
All the best,
spbatt
Add Comment
To leave a comment - Log in to Pentax User or create a new account.


1518 posts
22 years
Lincoln
Many Thanks
Kim