Something to Try (Only for the Brave)

ttk
Posted 31/10/2008 - 13:07 Link
I have always used Dust-Aid (sticky pads one size) never let me down.

www.dust-aid.com approx £30 in uk
Tel,
Mac
Posted 31/10/2008 - 13:14 Link
Terry,

THANKS!

I'm on the hunt for something more than air - because that's just moving the stuff around and multiplying it if anything.

I'll let you know how it goes.

Cheers.
Mac from Montreal

SP, SPII, SPF, PZ-10, P30, SFX, K110D, istDS, Optio 60, Z-10, H90, RZ10, I-10, f3.5 28mm, f1.8 55mm, f1.4 50mm, f3.5 135mm, f2.5 135mm, f4 50mm Macro, f4.5 80-200 F, f4 35-70, f3.5 28-80, f3.5 35-135, f3.5 18-55, f1.8 31mm Ltd., two Auto 110's, Auto 110 lenses and filters, tubes, bellows, Manfrottos and a sore back.
screwdriver
Posted 31/10/2008 - 16:15 Link
A better way to see the crud Mac, is to open PS or similar, open a new canvas make it full screen. Set the camera in Av mode and dial in the smallest aperture, it will give a shutter speed of several seconds, no problem the crud is stuck to the sensor and doesn't move, in fact I move my camera deliberately during the exposure, just in case my screens got crud on it too. Point the camera at the screen and take the shot, works a treat.

Waiting for a blue sky here in the UK could take several weeks.

Chris
Chris
Mac
Posted 31/10/2008 - 19:05 Link
screwdriver wrote:
A better way to see the crud Mac, is to open PS or similar, open a new canvas make it full screen. Set the camera in Av mode and dial in the smallest aperture, it will give a shutter speed of several seconds, no problem the crud is stuck to the sensor and doesn't move, in fact I move my camera deliberately during the exposure, just in case my screens got crud on it too. Point the camera at the screen and take the shot, works a treat.

Waiting for a blue sky here in the UK could take several weeks.

Chris
Thanks Chris.

I'll give that a try - after I do a thorough cleaning - right now I don't WANNA see more than I'm seeing - I've already got the creeps.

What do you use to clean your sensor?

Y'know guys, I'll bet this has all be done to death in the recent past - maybe I should just go and do a search on Sensor Cleaning?

Thanks for all the explanations and suggestions, much appreciated!

Cheers,
Mac from Montreal

SP, SPII, SPF, PZ-10, P30, SFX, K110D, istDS, Optio 60, Z-10, H90, RZ10, I-10, f3.5 28mm, f1.8 55mm, f1.4 50mm, f3.5 135mm, f2.5 135mm, f4 50mm Macro, f4.5 80-200 F, f4 35-70, f3.5 28-80, f3.5 35-135, f3.5 18-55, f1.8 31mm Ltd., two Auto 110's, Auto 110 lenses and filters, tubes, bellows, Manfrottos and a sore back.
Mac
Posted 31/10/2008 - 19:25 Link
Well, not a ton of choice over here, so ordered the Pentax sticky wand.

(Hey, John is never wrong! We want him for president!)

Mac from Montreal

SP, SPII, SPF, PZ-10, P30, SFX, K110D, istDS, Optio 60, Z-10, H90, RZ10, I-10, f3.5 28mm, f1.8 55mm, f1.4 50mm, f3.5 135mm, f2.5 135mm, f4 50mm Macro, f4.5 80-200 F, f4 35-70, f3.5 28-80, f3.5 35-135, f3.5 18-55, f1.8 31mm Ltd., two Auto 110's, Auto 110 lenses and filters, tubes, bellows, Manfrottos and a sore back.
Mike-P
Posted 31/10/2008 - 19:26 Link
My sensor was filthy at one time (had many comments here as it shows up badly when doing macro shots) so I invested in a product called SensorKlear.
It was pretty expensive but I used it just the once and havent noticed any comments since.
beginner
Posted 31/10/2008 - 19:53 Link
How many sticky wands do you get for £29.99?.........and how many times can you use them?.......I think I'll stick with my "Butterfly"...the best £40.00 I've ever spent...........................Ken
K20D...ist DS ,DA18/55,DA16/45.DA* 50/135,"A"1.7 50MM..."A" 70/210..M 50mm f2...Tamron 90mm macro,28/300 Tamron,200/500 Tamron 6.9....A Pentax DA*300... Sigma10/20,FA31mm 1.8 Ltd*********,FA 77mm Ltd!
screwdriver
Posted 31/10/2008 - 20:40 Link
If a blow with a rocket blower doesn't fix it I use Photographic Solutions sensor swabs and Eclipse E2 fluid. Had no problems at all though its a little scary the first time you do it. I must have cleaned my *istDS close to 50 times, I don't get anything like as big a problem with my K10D.

They're available everywhere including most High Street shops and even eBay there website is here link

I use their Pec Pads and ordinary Eclipse fluid for cleaning lenses and have done for years.

Chris
Chris
Edited by screwdriver: 31/10/2008 - 20:43
Mac
Posted 01/11/2008 - 03:00 Link
beginner wrote:
How many sticky wands do you get for £29.99?.........and how many times can you use them?.......I think I'll stick with my "Butterfly"...the best £40.00 I've ever spent...........................Ken
Ken, From what I can see, the wand gets cleaned off on pecial papers that come with it - supposed to be good for a really long time.

We'll see.

Hey, Christmas is comming - if they ask I'll say an Artic Butterfly - the big one. And a Rocket Blower - the big one.

Ho Ho Ho

Finally, Dad needs something.

Mac from Montreal

SP, SPII, SPF, PZ-10, P30, SFX, K110D, istDS, Optio 60, Z-10, H90, RZ10, I-10, f3.5 28mm, f1.8 55mm, f1.4 50mm, f3.5 135mm, f2.5 135mm, f4 50mm Macro, f4.5 80-200 F, f4 35-70, f3.5 28-80, f3.5 35-135, f3.5 18-55, f1.8 31mm Ltd., two Auto 110's, Auto 110 lenses and filters, tubes, bellows, Manfrottos and a sore back.
Mac
Posted 01/11/2008 - 03:03 Link
screwdriver wrote:
If a blow with a rocket blower doesn't fix it I use Photographic Solutions sensor swabs and Eclipse E2 fluid. Had no problems at all though its a little scary the first time you do it. I must have cleaned my *istDS close to 50 times, I don't get anything like as big a problem with my K10D.

They're available everywhere including most High Street shops and even eBay there website is here link

I use their Pec Pads and ordinary Eclipse fluid for cleaning lenses and have done for years.

Chris
Chris,

Lots of the wet stuff you guys can find over there is tough to get over here, but if I have to resort to it, I'll sure give your suggestion a shot.

Thanks,
Mac from Montreal

SP, SPII, SPF, PZ-10, P30, SFX, K110D, istDS, Optio 60, Z-10, H90, RZ10, I-10, f3.5 28mm, f1.8 55mm, f1.4 50mm, f3.5 135mm, f2.5 135mm, f4 50mm Macro, f4.5 80-200 F, f4 35-70, f3.5 28-80, f3.5 35-135, f3.5 18-55, f1.8 31mm Ltd., two Auto 110's, Auto 110 lenses and filters, tubes, bellows, Manfrottos and a sore back.
Hardgravity
Posted 01/11/2008 - 08:10 Link
Checked my K200d sensor with the built in software, ARGH!!!
quick shake , using the built in software. Phew! all the dust has gone.
now on the K110d it's a case of using one of those lens pen things to brush the dust off.
Cleaning's a lot easier with the up to date models
Cheers, HG

K110+DA40, K200+DA35, K3 and a bag of lenses, bodies and other bits.

Mustn't forget the Zenits, or folders, or...

PPG entries.
gartmore
Posted 01/11/2008 - 08:54 Link
screwdriver wrote:
If a blow with a rocket blower doesn't fix it I use Photographic Solutions sensor swabs and Eclipse E2 fluid. Had no problems at all though its a little scary the first time you do it. I must have cleaned my *istDS close to 50 times, I don't get anything like as big a problem with my K10D.

They're available everywhere including most High Street shops and even eBay there website is here link

I use their Pec Pads and ordinary Eclipse fluid for cleaning lenses and have done for years.

Chris
I use the Eclipse fluid and pads too, interestingly I've only had to clean my DS three times in three years. Are you particularly fastidious or do you work in a very dusty environment. This isn't at all a scientific observation but lately I've been using primes much more than dust pumps, I wonder if that could be making a difference?
Ken
“We must avoid however, snapping away, shooting quickly and without thought, overloading ourselves with unnecessary images that clutter our memory and diminish the clarity of the whole.” - Henri Cartier-Bresson -
gartmore
Posted 01/11/2008 - 08:55 Link
Mac wrote:
screwdriver wrote:
If a blow with a rocket blower doesn't fix it I use Photographic Solutions sensor swabs and Eclipse E2 fluid. Had no problems at all though its a little scary the first time you do it. I must have cleaned my *istDS close to 50 times, I don't get anything like as big a problem with my K10D.

They're available everywhere including most High Street shops and even eBay there website is here link

I use their Pec Pads and ordinary Eclipse fluid for cleaning lenses and have done for years.

Chris
Chris,

Lots of the wet stuff you guys can find over there is tough to get over here, but if I have to resort to it, I'll sure give your suggestion a shot.

Thanks,
Mac, the Eclipse stuff is from the USA

Ken
Ken
“We must avoid however, snapping away, shooting quickly and without thought, overloading ourselves with unnecessary images that clutter our memory and diminish the clarity of the whole.” - Henri Cartier-Bresson -
screwdriver
Posted 01/11/2008 - 11:57 Link
Chris[/quote]I use the Eclipse fluid and pads too, interestingly I've only had to clean my DS three times in three years. Are you particularly fastidious or do you work in a very dusty environment. This isn't at all a scientific observation but lately I've been using primes much more than dust pumps, I wonder if that could be making a difference?[/quote]I use a set of old BPM bellows a lot for Macro work, I think that might be the reason Gartmore.

Mac the Photographic Solutions product are available in Canada, if all else fails you can deal direct, or they will be somebody stocking them in your version of eBay. They're not cheap its about £2.00 a shot over here, but it really does work even when the junk seems 'welded' to the sensor.

Chris
Chris
Mac
Posted 01/11/2008 - 12:04 Link
,[/quote]Mac, the Eclipse stuff is from the USA

Ken[/quote]

And to Screwdriver Chris, too....

I'm goin' too fast as usual.

Thanks to all of you for the great input - and especially the confidence you've given me to give everything a go.

I was about to trash my poor K110D and buy a K20D, but with the money you've all saved for me, I can buy shares in Eclipse, Dust-Aid, Visible Dust, etc. I see a real growing need for these hygene products.

I have been using a combination of "dust pump" zooms, and both K Mount and adapted Screw Mount primes lately - changing lenses constantly.

Not especially dusty, but with the heating season upon us - it's getting very dry in the house - thus more static(y).

As I mentioned earlier, ol' Daddy Mac will be asking for cleaning stuff for his Christmas stocking. The Pentax wand thingy should arrive next week and hopefully will tide me over until Santa comes. (And hey, it says PENTAX on it - and I collect.)

My philosophy for starting with one of Chris' SRS refurbed K110D's as my first DSLR was to literally try every possible thing out on it - taking thousands of shots in every conceivable combination. Once I had satisfied my experimental, inquisitive, and somewhat risky impulses, I'd move up to, and baby, a K20D.

Know what? I can't seem to hurt this little tank. I used to say "They don't build 'em like that any more." (Check my sign-off to see what I'm comaring to). I was WRONG! Way to go, Pentax!

Now I can happily experiment with decontaminating what I thought was something too delicate to consider even looking at. (And thus my chicken comment earlier - thanks Dan, for pluckin' this one!)

Thanks again to you all - you've been more than patient, and it's appreciated!

Cheers,
Mac from Montreal

SP, SPII, SPF, PZ-10, P30, SFX, K110D, istDS, Optio 60, Z-10, H90, RZ10, I-10, f3.5 28mm, f1.8 55mm, f1.4 50mm, f3.5 135mm, f2.5 135mm, f4 50mm Macro, f4.5 80-200 F, f4 35-70, f3.5 28-80, f3.5 35-135, f3.5 18-55, f1.8 31mm Ltd., two Auto 110's, Auto 110 lenses and filters, tubes, bellows, Manfrottos and a sore back.
Edited by Mac: 01/11/2008 - 12:09

Add Comment

To leave a comment - Log in to Pentax User or create a new account.



Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo