Pentax K-5 quality checks
2,176 posts
Link
Posted 23/11/2011 - 20:39
Not all get tested, too many coming out of the factory. All testing is done by random sampling otherwise cost and time is way too high. It is the same with any manufacturing plant, service or anything else.
Regards,
Dan
https://www.flickr.com/photos/honourabletyr/
Regards,
Dan
https://www.flickr.com/photos/honourabletyr/
Link
Posted 23/11/2011 - 23:30
Tyr wrote:
Not all get tested, too many coming out of the factory. All testing is done by random sampling otherwise cost and time is way too high. It is the same with any manufacturing plant, service or anything else.
Not all get tested, too many coming out of the factory. All testing is done by random sampling otherwise cost and time is way too high. It is the same with any manufacturing plant, service or anything else.
Not quite, although random sampling is he norm, in some cases the cost of failure is considered too high.
With of the motorsport we've done fuel for, every keg of race fuel has been tested before it leaves the refinery. Any that do not meet the FIA regulations don't leave. Despite this any kegs being used on raceday were apparently tested again...
Mike
.
Pentax:K5ii, K7, K100D, DA18-55, DA10-17, DA55-300, DA50-200, F100-300, F50, DA35 AL, 4* M50, 2* M135, Helicoid extension, Tak 300 f4 (& 6 film bodies)
3rd Party: Bigmos (Sigma 150-500mm OS HSM),2* 28mm, 100mm macro, 28-200 zoom, 35-80 zoom, 80-200 zoom, 80-210 zoom, 300mm M42, 600 mirror, 1000-4000 scope, 50mm M42, enlarger lenses, Sony & micro 4/3 cameras with various PK mounts, Zenit E...
Far to many tele-converters, adapters, project parts & extension tubes etc.
.[size=11:].Flickr• WPF• Panoramio
Last Edited by petrochemist on 23/11/2011 - 23:32
Link
Posted 24/11/2011 - 10:28
And Pentax has the option to reset to zero after testing.
Pentax K10D + Vivitar 55/2.8 macro + Super Takumar 55/1.8 + SuperMultiCoated Takumar 85/1.8 + SuperMultiCoated Takumar 135/3.5 + SuperMultiCoated Takumar 200/4 + Super Takumar 300/4
Pentax K100D + DA18-55ALII + DA55-300
Pentax K5 + FA31Ltd + M50/1.7 + DFA100WR + M120/2.8 (+ DA18-55WR at occasion)
Pentax K10D + Vivitar 55/2.8 macro + Super Takumar 55/1.8 + SuperMultiCoated Takumar 85/1.8 + SuperMultiCoated Takumar 135/3.5 + SuperMultiCoated Takumar 200/4 + Super Takumar 300/4
Pentax K100D + DA18-55ALII + DA55-300
Pentax K5 + FA31Ltd + M50/1.7 + DFA100WR + M120/2.8 (+ DA18-55WR at occasion)
Link
Posted 25/11/2011 - 23:10
My K-5 was zero for the shutter count. Either they reset it or test random samples. A few years ago with the K20D people used to complain that the count wasn't zero - they can't win.
K3ii, K-5, K-x, DA150-450mm, DA16-85WR, DA16-45, DA18-55WR, DA18-135WR, DA35 F2.4, M100mm F4 Macro, DA55-300mm, FA50mm 1.4, AF360 Flash, AF540 Flash
K3ii, K-5, K-x, DA150-450mm, DA16-85WR, DA16-45, DA18-55WR, DA18-135WR, DA35 F2.4, M100mm F4 Macro, DA55-300mm, FA50mm 1.4, AF360 Flash, AF540 Flash
Link
Posted 26/11/2011 - 04:55
col55555ine wrote:
i have just recieved my new K-5 body,taken my first photo to test,
checked my shutter count via; photo me & myshuttercount.com.
The shutter count is 1,
so do pentax not check camera bodies before leaving the factory anymore?
i have just recieved my new K-5 body,taken my first photo to test,
checked my shutter count via; photo me & myshuttercount.com.
The shutter count is 1,
so do pentax not check camera bodies before leaving the factory anymore?
1 is enough
K-1 K-01 Q-7
some len
Close to the Edge
Down by the River
Add a Comment
You must be registered or logged-in to comment.
col55555ine
Member
uk
checked my shutter count via; photo me & myshuttercount.com.
The shutter count is 1,
so do pentax not check camera bodies before leaving the factory anymore?
k-5 IIs, Pentax 60-250, 17-70, 100macro WR, 50mm F2,
AF50 F1.4, Siggy 10-20, Siggy 100-300 F4, ..Pentax Af 160 ring flash