ME-super & AF400FTZ flash ... trying to learn, information please?

grumpyguts
Posted 06/06/2011 - 20:36 Link
[Dig K10D + loads of lenses and a couple of Metz flashes]
Relevantly: ME-super, 50mm SMC f1/1.4 + other lenses and, until now, AF160 flash.

I impulse bought the AF400FTZ flash, aware that it had the contacts of a digital device, but at such a bargain price I just could not not. Now, I have been using my film kit not nearly enough, have discovered the wonder of putting the 50mm lens, and some of the others on my digital camera.

Currently I do not plan to put this flash on the K10 [worried about voltages - should I be? ], but I would love to be educated about how much function to expect from it on my ME-s. I've already discovered that, unlike the AF160, it will not automatically put the camera at the sync speed in 'Auto' or 'M' modes, but it does fire when the camera dial is set to the mechanical 125x setting. I am perplexed by the fact that - on the flash - you set the ASA, as well as the focal length, and it recommends an aperture; then there is a 1st/2nd curtain choice, but THEN a 3-way choice, 'TTL AUTO' and 'MANU H' & 'L'.

Main question, then, is what the ONE additional contact on the camera hotshoe enables by way of controlling what the flash does.

Next question - the AF160 has an ability - to an extent - to appraise the scene and adjust the output. What functionality can I expect from the FTZ400 on the ME-s, in what modes (i.e., does putting it on the 'TTL AUTO' setting lead to ANY communication with the camera's metering, and so adjust output with regard to that?) And the two manual settings, H & L: how do I make use of them? It would just be so useful to have something so powerful in my film kit.

I have just taken some indoor test shots on HP5 400, the flash certainly fired on all settings (very subjectively, the 'H' setting was very high output, the 'L' much lower, and the 'TTL AUTO' somewhere in between (I have a light-meter, but not a flash-meter), so it did appear some meaningful appraisal of the scene occurred, but was this entirely by the flash?

I really don't have more than a general idea about what additional flash/hotshoe contacts do, but the fact that the ME-s at least has one more, that the handbook does at least use the term 'TTL' now and again (although not in relation to flash). I would just be grateful for information and guidance about what I can do, and how to do it, with this particular camera & flash combination.

I really would value some help from someone in the know. Thanks.
Edited by grumpyguts: 06/06/2011 - 20:38
Dangermouse
Posted 06/06/2011 - 20:47 Link
I wouldn't worry about the voltages, as all Pentax flashguns I've tried have been safe. If you're worried, try borrowing a multimeter and measuring the trigger voltage. Just turn the flash on, set the meter to measure DC volts, touch the positive probe to the centre pin of the hotshoe "foot" and the negative probe to the side contact, then read the voltage. I have yet to see over 8v from any Pentax flash.

I can't really offer much advice on the AF400FTZ beyond this, my favoured flashguns are an AF201SA (tiny but powerful, works in Program mode on my K-m) and an AF280T (powerful, has multiple modes and bounce/swivel head).
Matt

Shooting the Welsh Wilderness with K-m, KX, MX, ME Super and assorted lenses.
grumpyguts
Posted 06/06/2011 - 21:06 Link
Thanks for that tip. It's really the ME-super and this flash that I'm most interested in learning about.
If I sound condescending, it's just my style Much more equipment than know-how, so seeking to catch-up.
[K10, ME-super, lenses, flashes old and new (old - Pentax AF160 AF400FTZ; new Metz 58 AF-1, 48 AF-1, 15 AF ring), tripods, filters, connectors, converters, eye-pieces, rings, SPLENDID old Sekonic meter, bellows, 2-way rack, slide copier and lots of bits and bobs for mysterious things I don't have a clue about ...
Kim C
Posted 06/06/2011 - 21:31 Link
Hi,
The AF400FTZ is safe on the DSLRs. Indeed all the AF range are. I would be a little cautious about the old M42 ones such as the Superlite II etc though.

The manual for the AF400FTZ is on my website here http://pentax-manuals.com/manuals/accessories/accessmanuals.htm

You can't use the gun in auto on the ME-S. The 3 contacts on the bottom are the "fire" link, the second is for TTL flash and the third communicates Zoom data on the AF bodies.

TTL flash cannot be used with any of the K or M series bodies. It can be used with the LX and Super A and the KAF mount cameras. The details are in a full table in the manual. H and L select high and low manual output. As the gun was designed for the AF cameras it receives meter information from them and therefore cannot be used in "auto" on the ME-S.

The best gun for that is probably the AF280T which has about the same power output.

Kim
Edited by Kim C: 06/06/2011 - 21:50
grumpyguts
Posted 06/06/2011 - 21:47 Link
Sorry, a little confused ... I should be able to use the gun on auto on the ME-s, but ....... the gun cannot be used on "auto" on the ME-s. Does this apparent tautology mean I can set the flash to auto, and - in 125x setting on camera - there will be some control of the output,but from the flash only; but not set 'auto' on the camera and expect the flash to work (already tried that - see above - and discovered this to be the case). ??? And, if I have you right, the gun on auto will be doing a bit of work to try to expose the shot correctly?

No, sorry, my mistake, no tautology: I can't ... and I can't. SO this flashgun cannot be used in any useful way on the ME-s?

[It's the equipment I HAVE rather than ought to have that I'm hoping to understand ]
If I sound condescending, it's just my style Much more equipment than know-how, so seeking to catch-up.
[K10, ME-super, lenses, flashes old and new (old - Pentax AF160 AF400FTZ; new Metz 58 AF-1, 48 AF-1, 15 AF ring), tripods, filters, connectors, converters, eye-pieces, rings, SPLENDID old Sekonic meter, bellows, 2-way rack, slide copier and lots of bits and bobs for mysterious things I don't have a clue about ...
Edited by grumpyguts: 06/06/2011 - 21:58
Kim C
Posted 06/06/2011 - 21:54 Link
My fault, brain not in gear. After I started typing, I double checked the manual from the website (away from homeat the moment so couldn't check the gun)

There is no Auto setting available on the M or K series. It will work in manual mode only setting either hi or lo output. You will have to use the table on the back to set the aperture and manually set the camera to 125 or slower.

Kim

grumpyguts wrote:
Sorry, a little confused ... I should be able to use the gun on auto on the ME-s, but ....... the gun cannot be used on "auto" on the ME-s. Does this apparent tautology mean I can set the flash to auto, and - in 125x setting on camera - there will be some control of the output,but from the flash only; but not set 'auto' on the camera and expect the flash to work (already tried that - see above - and discovered this to be the case. ???
grumpyguts
Posted 06/06/2011 - 22:02 Link
I'll be interested to see the shots I took, then. I rather suspected 'auto ttl' would be newer technology than my beautiful ME-s, but I effectively have a suped-up AF160 for higher output situations. This is good. Thank you
If I sound condescending, it's just my style Much more equipment than know-how, so seeking to catch-up.
[K10, ME-super, lenses, flashes old and new (old - Pentax AF160 AF400FTZ; new Metz 58 AF-1, 48 AF-1, 15 AF ring), tripods, filters, connectors, converters, eye-pieces, rings, SPLENDID old Sekonic meter, bellows, 2-way rack, slide copier and lots of bits and bobs for mysterious things I don't have a clue about ...
grumpyguts
Posted 06/06/2011 - 22:10 Link
But I would like to know what was going on when I took a shot, all the flash settings correct, but in AUTO TTL mode: it flashed, less brightly than HI and more than LO .... what was it doing?

[and your website won't show me a manual, as it wants a password. Can easily find same on Pentax site, though, so not a problem ]
If I sound condescending, it's just my style Much more equipment than know-how, so seeking to catch-up.
[K10, ME-super, lenses, flashes old and new (old - Pentax AF160 AF400FTZ; new Metz 58 AF-1, 48 AF-1, 15 AF ring), tripods, filters, connectors, converters, eye-pieces, rings, SPLENDID old Sekonic meter, bellows, 2-way rack, slide copier and lots of bits and bobs for mysterious things I don't have a clue about ...
Edited by grumpyguts: 06/06/2011 - 22:12
Kim C
Posted 06/06/2011 - 22:23 Link
The Password for all the manuals is "Pentax" as it say on every page

I am in the process of removing them. It was an attempt to stop them being sold on eBay but didn't work. Nearly all the CD's sold there are from my site

Kim

grumpyguts wrote:
But I would like to know what was going on when I took a shot, all the flash settings correct, but in AUTO TTL mode: it flashed, less brightly than HI and more than LO .... what was it doing?

[and your website won't show me a manual, as it wants a password. Can easily find same on Pentax site, though, so not a problem ]
johnriley
Posted 06/06/2011 - 23:04 Link
Simple Auto operation should be possible with most cameras as the flashgun cuts itself off when enough light has been received by its sensor.
Best regards, John
Kim C
Posted 06/06/2011 - 23:25 Link
I am away from home but checking the manual rather than the gun itself, the trouble is the AF400FTZ doesn't have the sensor

Kim

johnriley wrote:
Simple Auto operation should be possible with most cameras as the flashgun cuts itself off when enough light has been received by its sensor.
Dangermouse
Posted 12/06/2011 - 00:06 Link
Interestingly your AF160 is probably more use on your K10D than the AF400FTZ. Put the camera into Manual mode, set the sync speed, aperture and ISO to what the flash expects in whichever Auto mode you pick, then shoot away. You'll even get the little flash ready icon in the viewfinder, or at least my K-m does!

Have a look at the Dimitrov K mount site for an explanation of the various Pentax flash automation protocols and what the extra pins do.
Matt

Shooting the Welsh Wilderness with K-m, KX, MX, ME Super and assorted lenses.
Posted 24/12/2011 - 00:56 Link
Hi, Fellas. I got an AF400FTZ inherited from a friend long time ago. I bought a Pentax K-r. I already measured its voltage as 3.2 VDC. Does the the voltage vary once it is triggered by the camera, will it increase from 3.2 volts? I am worried that trying it might disable my camera. Another thing, since the AF400FTZ is a TTL and not a P-TTL device, it what setting will it work with my K-r?

Thanks in advance.
womble
Posted 24/12/2011 - 12:46 Link
efjavier1959 wrote:
Hi, Fellas. I got an AF400FTZ inherited from a friend long time ago. I bought a Pentax K-r. I already measured its voltage as 3.2 VDC. Does the the voltage vary once it is triggered by the camera, will it increase from 3.2 volts? I am worried that trying it might disable my camera. Another thing, since the AF400FTZ is a TTL and not a P-TTL device, it what setting will it work with my K-r?

Thanks in advance.
It is perfectly safe to use on your dSLR. You'll have to use it on manual though (hi and lo) as P-TTL and the older TTL are incompatible.

K.
Kris Lockyear
It is an illusion that photos are made with the camera… they are made with the eye, heart and head. Henri Cartier-Bresson
Lots of film bodies, a couple of digital ones, too many lenses (mainly older glass) and a Horseman LE 5x4.

Add Comment

To leave a comment - Log in to Pentax User or create a new account.



Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo