Manual Extension Tubes

JAK
Posted 22/11/2016 - 16:15 Link
The Jessops tubes are marked PKA/AF, but having just tried them they aren't AF at all. Wonder what they were thinking. They do though pass the aperture info through OK so fine for lenses not equipped with an aperture setting. AF for macro work is pretty pointless anyhow.
John K
Algernon
Posted 22/11/2016 - 16:43 Link
JohnX wrote:
AFAIK there aren't any extension tubes that support auto focussing?

More than happy to be corrected.
There was one by Kenko, but most people just remove the glass from a TC or an old zoom lens.

--
Half Man... Half Pentax ... Half Cucumber

Pentax K-1 + K-5 and some other stuff

Algi
Edited by Algernon: 22/11/2016 - 16:45
davidwozhere
Posted 24/11/2016 - 15:31 Link
The best set you will get is the Asahi Pentax M42 one in a leather case that quite often appears on Ebay. Precision made, won't get stuck, accepts all old glass with M42 mounts. The KA mount, Jessops set with the 'A' series contacts also works but you need to scrape off a bit of the anodising on each one for the camera to gain control of the aperture - and even then it doesn't report the fact to the viewfinder or the top panel (you only discover that it has worked by looking at on a shot you have taken!! Best method of the lot has to be bellows with a 50mm, 100mm or 135mm lens on the front. This gives you a multi-variable "extension tube" courtesy of the bellows itself. If you have a set that accepts a cable release (e.g. a Pentax one) you can focus at full aperture and then stop the lens down via the cable control on the front mount or, like me, use a preset lens that you can control exactly as you choose.
Both the *istDS and the K5 are incurably addicted to old glass

My page on Photocrowd
LennyBloke
Posted 24/11/2016 - 19:57 Link
Many of the Jessops sets do show PK/AF marked on the side but this actually relates to the mount, not the Autofocus function. As far as I'm aware none of the Jessops tubes actually carry the Aperture information between lens and body unless the modification is made (this involves removing a small amount of the black paint from the rear of the tube, a few mm's away from the last contact). The modification is not difficult, but it is crucial that you keep everything as clean as possible, because it's very easy for debris to drop inside the tubes and potentially find its way into the camera body.

Teleplus/Triplus P/AF extension tubes do carry the Aperture information without any modification. They also feel a bit better engineered, but are usually more expensive.
Comment Image


Comment Image


I've never seen a set of Autofocus tubes, but have seen references to the Kenko sets before.

LennyBloke
RobL
Posted 24/11/2016 - 22:20 Link
Wouldn't it be nice if Ricoh made accessories like this available now, I am sure they are made as they are in a K-1 catalogue and on the Japanese Ricoh website.
JAK
Posted 25/11/2016 - 00:09 Link
davidwozhere wrote:
The KA mount, Jessops set with the 'A' series contacts also works but you need to scrape off a bit of the anodising on each one for the camera to gain control of the aperture - and even then it doesn't report the fact to the viewfinder or the top panel (you only discover that it has worked by looking at on a shot you have taken!!
LennyBloke wrote:
As far as I'm aware none of the Jessops tubes actually carry the Aperture information between lens and body unless the modification is made (this involves removing a small amount of the black paint from the rear of the tube, a few mm's away from the last contact). The modification is not difficult, but it is crucial that you keep everything as clean as possible, because it's very easy for debris to drop inside the tubes and potentially find its way into the camera body.
Sorry to have to disagree with you both! I have a set of Jessops K mount tubes in front of me as write. These PKA/AF tubes are mint, never scraped or otherwise mutilated and have have no problem passing aperture info between the lens and the camera! I've experienced this issue with some teleconverters, but NOT these Jessops K mount extension tubes. Do you have, or have you had, a set of Jessops tubes that have required scraping?
John K
Edited by JAK: 25/11/2016 - 00:10
Algernon
Posted 25/11/2016 - 08:39 Link
All the Jessop one's I've seen need scraping. You must have a set that haven't been painted black next to the contacts i.e. silver.

It is a bit odd that they call them KA when a contact from the body is missing.

Same tubes are sold under other brands such as AICO.



--
Half Man... Half Pentax ... Half Cucumber

Pentax K-1 + K-5 and some other stuff

Algi
Edited by Algernon: 25/11/2016 - 08:51
LennyBloke
Posted 25/11/2016 - 14:55 Link
JAK wrote:

Sorry to have to disagree with you both! I have a set of Jessops K mount tubes in front of me as write. These PKA/AF tubes are mint, never scraped or otherwise mutilated and have have no problem passing aperture info between the lens and the camera! I've experienced this issue with some teleconverters, but NOT these Jessops K mount extension tubes. Do you have, or have you had, a set of Jessops tubes that have required scraping?
Well John - I have serious egg on my face now

I have had 3 or 4 Jessops sets in the past marked as PKA/AF and I am absolutely certain that they did not pass the aperture info between camera and lens. I have an un-modded set in front of me now and I had started to photograph each stage of the process to show how the aperture info is not displayed before, and is after....

...well, step one - testing - the aperture info shows on the back screen in AV mode and I can set the aperture from the camera thumbwheel - the aperture does not display on the top LCD screen though, this is where they differ from the Triplus tubes

Thanks for challenging this, it means I don't have to spend any time scraping, finishing and cleaning this set...

... now anyone want to buy a set of Jessops PKA/AF un-modded tubes that DO pass aperture info :

LennyBloke
Algernon
Posted 25/11/2016 - 15:48 Link
If the aperture isn't showing on the top screen.... something isn't working
At best the metering will be a few stops out. It can also cause mirror flipping.

Just checked again on the K-5 and it doesn't show on either screen with a Jessops painted tube. Removing the paint allows one of the pins to be shorted out. They can all be shorted out and it will work OK.

--
Half Man... Half Pentax ... Half Cucumber

Pentax K-1 + K-5 and some other stuff

Algi
LennyBloke
Posted 25/11/2016 - 17:53 Link
Algernon wrote:
If the aperture isn't showing on the top screen.... something isn't working
At best the metering will be a few stops out. It can also cause mirror flipping.

Just checked again on the K-5 and it doesn't show on either screen with a Jessops painted tube. Removing the paint allows one of the pins to be shorted out. They can all be shorted out and it will work OK.

--
Checked it at maximum and minimum apertures and it exposed correctly for both not sure what you mean about "mirror flipping" :
LennyBloke
redbusa99
Posted 26/11/2016 - 10:15 Link
algernon's link to the Kenko one had me searching Ebay and these are all over it . how they compare i'm not sure but may be worth a punt

http://www.ebay.co.uk/itm/KOOKA-KK-P25-Copper-Macro-Extension-Tubes-Auto-Focus-C...
odd lens or 2

Flickr
JAK
Posted 26/11/2016 - 11:07 Link
LennyBloke wrote:
I have an un-modded set in front of me now and I had started to photograph each stage of the process to show how the aperture info is not displayed before, and is after....

...well, step one - testing - the aperture info shows on the back screen in AV mode and I can set the aperture from the camera thumbwheel - the aperture does not display on the top LCD screen though, this is where they differ from the Triplus tubes

Thanks for challenging this, it means I don't have to spend any time scraping, finishing and cleaning this set...
Well I'm pleased you've seen the light, err sorry aperture info!
Did you mean it doesn't show on the LCD top screen? Can't understand that. I've just retried mine to see if I can replicate that but cannot with my K-1, FA 50mm macro and 31mm tube. It shows there just fine. Mind, I can't be bothered to test every body/lens combination to see if it fails with some but cannot see why it should.
John K
Edited by JAK: 26/11/2016 - 11:08
Algernon
Posted 26/11/2016 - 12:43 Link
You also need to test with KA tubes that the minimum aperture is being transferred from the lens correctly. i.e. with say an f/1.7 lens you should only be able to set down to f/1.7 on the dial. If you can set f/1.4 something isn't connecting.

Mirror flipping is when the mirror bounces up and down two or more times instead of once. Quite rare.

--
Half Man... Half Pentax ... Half Cucumber

Pentax K-1 + K-5 and some other stuff

Algi
Algernon
Posted 26/11/2016 - 13:11 Link
[quote:3496ace15f="redbusa99"]algernon's link to the Kenko one had me searching Ebay and these are all over it . how they compare i'm not sure but may be worth a punt

]http://www.ebay.co.uk/itm/KOOKA-KK-P25-Copper-Macro-Extension-Tubes-Auto-Focus-C...

SRB stocked these, but returned the full batch when they found a fault 2 years ago


7 pages about them on the other forum (+ other threads)
http://www.pentaxforums.com/forums/16-pentax-news-rumors/264093-new-auto-extensi...

--
Half Man... Half Pentax ... Half Cucumber

Pentax K-1 + K-5 and some other stuff

Algi

Add Comment

To leave a comment - Log in to Pentax User or create a new account.



Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo