Light proof glass filter fixing

Karl
Posted 14/10/2009 - 19:17 Link
I have just bought some glass to put in front of one of my lenses, I will probably use a manual 28mm. The glass is size 4 1/4 x 3 1/4 inches.
Any suggestions how to stick it onto the lense so it is light proof?
I was thinking of a circle of bluetac.
https://pentaxphotogallery.com" target="_blank">https://pentaxphotogallery.com/images/black_link_small.jpg" alt="See my photos featured in the PENTAX Photogallery" />
George Lazarette
Posted 14/10/2009 - 19:18 Link
I don't think I would trust Bluetac, unless you use a lot of it. But what is the glass for?

G
Keywords: Charming, polite, and generally agreeable.
Karl
Posted 14/10/2009 - 19:19 Link
It is glass for a welding mask. The idea is to get a super long exposure from it.
https://pentaxphotogallery.com" target="_blank">https://pentaxphotogallery.com/images/black_link_small.jpg" alt="See my photos featured in the PENTAX Photogallery" />
George Lazarette
Posted 14/10/2009 - 19:24 Link
Ah. Neutral density. Your heading said "Light Proof Glass", and I was wondering if you were trying to re-invent the lens cap.

G

ETA: If it's just temporary, then Blutac is probably just the thing.
Keywords: Charming, polite, and generally agreeable.
Edited by George Lazarette: 14/10/2009 - 19:25
Karl
Posted 14/10/2009 - 19:26 Link
Yes it's a cheap £1.30 10 stop ND filter in essence.
I just need to figure out a light proof way of fixing it on to my lense.
https://pentaxphotogallery.com" target="_blank">https://pentaxphotogallery.com/images/black_link_small.jpg" alt="See my photos featured in the PENTAX Photogallery" />
Hardgravity
Posted 14/10/2009 - 21:52 Link
Bluetak sounds good if you want to remove it later.

If not what about bostic or similar?
Cheers, HG

K110+DA40, K200+DA35, K3 and a bag of lenses, bodies and other bits.

Mustn't forget the Zenits, or folders, or...

PPG entries.
Father Ted
Posted 14/10/2009 - 22:01 Link
I'd go with blue tack....it works a treat. I used it to fix a polarizer to my lens for a long time
Getting there! Thanks to you guys

Pentax K3ii, Pentax K10d, Kit lens ( 18-55mm ), 50mm f1.7 lens, Tamron 70-300mm lens, Prinzflex 70-162 manual lens, Various old flashes.
Don
Posted 14/10/2009 - 23:18 Link
could always try hot glue and a step up ring or a cokin filter adaptor...
Fired many shots. Didn't kill anything.
pentaxian450
Posted 15/10/2009 - 00:03 Link
Karl wrote:
Yes it's a cheap £1.30 10 stop ND filter in essence.
I just need to figure out a light proof way of fixing it on to my lense.
If the standards are the same in England as they are in North America, a #10 welding glass is not exactly the same as a 10 stop ND filter. The ND filter won't "kill" the U.V., but the welding glass will, and it will also take off quite a bit of infrared radiation. The danger while welding, beside the intense light, is U.V. radiation, which will give you intense sunburn before you can realize it. If you take pictures of any type of electrical welding, make sure you don't have any exposed skin. When you feel the heat on your skin, it will be too late, it will be at least a second degree burn, if not third degree.

Good luck with your pictures, but play it safe.
Yves (another one of those crazy Canucks)
ChrisA
Posted 15/10/2009 - 00:47 Link
Karl wrote:
It is glass for a welding mask. The idea is to get a super long exposure from it.
I have a bit of welders glass; I used it to photograph the partial eclipse of the sun in August last year.

It's smaller than yours, but Blutac held it on to the Cokin filter holder really well.

The optical quality, is, however, terrible. Trust me, that is not camera shake.

So don't expect too much !!
.
Pentax K-3, DA18-135, DA35 F2.4, DA17-70, DA55-300, FA28-200, A50 F1.7, A100 F4 Macro, A400 F5.6, Sigma 10-20 EXDC, 50-500 F4.5-6.3 APO DG OS Samsung flash SEF-54PZF(x2)
.
Edited by ChrisA: 15/10/2009 - 00:49
Karl
Posted 15/10/2009 - 00:59 Link
Cheers chaps, will try bluetack I think then.
As for optical quality, I am expecting a lo fi result which is possibly part of the appeal. We will see. I'll post images.
https://pentaxphotogallery.com" target="_blank">https://pentaxphotogallery.com/images/black_link_small.jpg" alt="See my photos featured in the PENTAX Photogallery" />
greyhoundman
Posted 15/10/2009 - 12:54 Link
Be prepared to do some major white balance adjusting. Otherwise, you will have the strangest colors in the photo. I use this kind of glass on some of my scopes for shooting the sun.
grahamwalton
Posted 15/10/2009 - 14:08 Link
Why not Araldite a Cokin P series, or perhaps A series screwed Adaptor Ring to your piece of glass. Just choose the thread diameter of the Cokin Adaptor Ring to suit your lens.
Friendly Regards
Graham

Add Comment

To leave a comment - Log in to Pentax User or create a new account.



Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo