K3 II AF...
Posted 27/04/2015 - 09:13
Link
What I want to know is how long will all the internal parts last? Things will have to shake pretty quickly if it actually takes 3 or 4 actual photos to capture 1 image. Then if you are shooting at 1/8000th second (sport etc.) and at 8 frames a second that will have to be pretty dam fast.
CHEERS Vic.
CHEERS Vic.
Born again biker with lots of Pentax bits. Every day I wake up is a good day. I'm so old I don't even buy green bananas.
Posted 27/04/2015 - 10:02
Link
vic cross wrote:
What I want to know is how long will all the internal parts last? Things will have to shake pretty quickly if it actually takes 3 or 4 actual photos to capture 1 image. Then if you are shooting at 1/8000th second (sport etc.) and at 8 frames a second that will have to be pretty dam fast.
CHEERS Vic.
The subject has to have no movement, so sport is out.
What I want to know is how long will all the internal parts last? Things will have to shake pretty quickly if it actually takes 3 or 4 actual photos to capture 1 image. Then if you are shooting at 1/8000th second (sport etc.) and at 8 frames a second that will have to be pretty dam fast.
CHEERS Vic.
Posted 27/04/2015 - 10:20
Link
OK Richard I missed that bit but the same speeds are still available to use?
CHEERS Vic.
CHEERS Vic.
Born again biker with lots of Pentax bits. Every day I wake up is a good day. I'm so old I don't even buy green bananas.
Posted 27/04/2015 - 12:04
Link
vic cross wrote:
What I want to know is how long will all the internal parts last? Things will have to shake pretty quickly if it actually takes 3 or 4 actual photos to capture 1 image. Then if you are shooting at 1/8000th second (sport etc.) and at 8 frames a second that will have to be pretty dam fast.
CHEERS Vic.
I suspect it'll be shaking no more than if you were just using normal existing image stabilisation at 8 fps.What I want to know is how long will all the internal parts last? Things will have to shake pretty quickly if it actually takes 3 or 4 actual photos to capture 1 image. Then if you are shooting at 1/8000th second (sport etc.) and at 8 frames a second that will have to be pretty dam fast.
CHEERS Vic.
At 8 fps you'll just get 2 compound images per second though instead of eight. If we make the assumption that Pentax actually provide a raw image file with the four raws images inside it it should be possible to write a bit of softeare to extract those component images out this getting get the original 8 fps back but without the supposed benefit of the super resolution stuff. If Pentax don't do that but instead do in-camera processing to generate a single 'enhanced' raw you'll definitely have to make you mind up on what you want at capture time. As we will if Pentax do the (poor) job they did on HDR and only offer us a jpeg output.
Personally I hope Pentax's design decision was for in-camera processing to a single raw image, if the camera 'cpu' has enough grunt for it of course.
Posted 30/04/2015 - 17:47
Link
Before the K3II was announced I had a such a model in mind as a possible upgrade for some time in the future, but the lack of an inbuilt flash is causing doubts. Having just learned the use of the flash to trigger an off-camera flashgun the same scenario would require a second unit involving more expense and more kit to carry around; also it is handy to have the built-in flash for impromptu opportunities and not being a professional I want one camera that can do everything I need. Given the choice I would have preferred this to the GPS - and what the hell do I need a compass in a camera for? The competition all have inbuilt flash so it will be interesting to see how long this concept lasts. I await with interest the independent reviews as to the effectiveness of the new sensor and as importantly for me how good the autofocus is compared to Canon.
Posted 30/04/2015 - 21:52
Link
I watched the Camera store video on the new entry level Canon DSLRs and a few things stood out.
Frist the viewfinders were tiny, which I find really weird given that's the primary benefit/point of difference now of a DSLR over a mirrorless camera. To make this small seemed to make no sense at all.
On the flipside, their basic models now feature a touchscreen and tracking autofocus. You simply tap the item you want to track, and the camera does the rest. Now granted there are only certain times that this could be useful, but it did look to me that this would easily beat anything Pentax has in any of it's cameras, even the flagship K-3 models.
Re GPS, personally I'd much rather have this than a pokey inbuilt flash. You can buy wireless triggers for less than you can buy the GPS add on module, so it's a win for me. If you wanted to use an off camera HSS capable flash, then you need to pay for another HSS on camera flash anyway, due to how Pentaxs flash system inherently restrict this.
Frist the viewfinders were tiny, which I find really weird given that's the primary benefit/point of difference now of a DSLR over a mirrorless camera. To make this small seemed to make no sense at all.
On the flipside, their basic models now feature a touchscreen and tracking autofocus. You simply tap the item you want to track, and the camera does the rest. Now granted there are only certain times that this could be useful, but it did look to me that this would easily beat anything Pentax has in any of it's cameras, even the flagship K-3 models.
Re GPS, personally I'd much rather have this than a pokey inbuilt flash. You can buy wireless triggers for less than you can buy the GPS add on module, so it's a win for me. If you wanted to use an off camera HSS capable flash, then you need to pay for another HSS on camera flash anyway, due to how Pentaxs flash system inherently restrict this.
Posted 01/05/2015 - 03:23
Link
Quote:
The competition all have inbuilt flash
What competition would that be?The competition all have inbuilt flash
A majority of cameras from companies such as Canon and Nikon do NOT have built in flash, especially the newer releases that are due to come out from both of those companies - such as the 50mp+ models from Canon. For both of those named companies, mostly the entry level to a select few of the intermediate level models have built in fill flash.
Ironically though... Most of the Leica models do not have built in flash, but the top of the digital line Hasselblad's do have quite an impressive fill flash. I have yet to EVER see anyone use a fill flash on a Hasselblad in the real world though
Posted 12/05/2015 - 10:31
Link
alfpics wrote:
Hi Andy, richandfleur wrote:
Pentax has not been particularly proactive in pushing these sorts of improvements down the chain.
The high res mode seems an easy addition to any camera with capable hardware, which is like down to the k100d. It would be interesting to see if this eventuates as a firmware update or not.
Other brands, in a world outside the scope of this forum, are better at this post purchase support and I feel it's something Pentax/Ricoh could improve on or learn from.
I don't see how they could replicate the hi-res mode back down the line. Pentax's implementation is to move the RGBG filter separate to the sensor. If I understand it correctly, they need to shake mechanisms; one for the SR we know and the AA simulator, and a separate one just to move the filter now separated from the sensorPentax has not been particularly proactive in pushing these sorts of improvements down the chain.
The high res mode seems an easy addition to any camera with capable hardware, which is like down to the k100d. It would be interesting to see if this eventuates as a firmware update or not.
Other brands, in a world outside the scope of this forum, are better at this post purchase support and I feel it's something Pentax/Ricoh could improve on or learn from.
I think you'll find it only has one mechanism to control the whole lot, as indicated on the news page blog (note the asterisks - *** - for various functions), copied below. This makes me think there MAY be modifications to the K3 mechanism controlling the SR and AA but it is mainly a software ie firmware update controlling the new function. After all, the sensor already moves every which way, it's just a matter of altering the movement.
(1) Upgraded in-body SR mechanism to assure the best shake reduction performance in the K series
The K-3 II comes equipped with a PENTAX-developed SR (Shake Reduction) mechanism that can be used with any compatible PENTAX interchangeable lens.* Thanks to its new, high-precision gyro sensor, this mechanism assures more stable, effective camera-shake compensation than ever before, with an extra-wide compensation range of as much as 4.5 shutter steps — the widest of all K-series digital SLR models. Even when taking a panning shot, this efficiently controls the SR unit to always produce the best image possible under the given conditions.
(2) New Pixel Shift Resolution System to deliver image resolution higher than the image sensor’s capacity
The K-3 II features Pixel Shift Resolution System,** the latest super-resolution technology, which captures four images of the same scene by shifting the image sensor by a single pixel for each image, then synthesizes them into a single composite image. Compared to the conventional Bayer system, in which each pixel has only a single unit of colour data, this new system obtains all colour data in each pixel. This innovative system delivers super-high-resolution images with far more truthful colour reproduction and much finer detail, while significantly lowering the level of high-sensitivity noise. Recorded images can also be synthesized, either on a computer using the accompanying utility software, or with the camera’s built-in RAW-data development function.
(3) Innovative AA filter simulator to minimise moiré
By applying microscopic vibrations to the image sensor unit at the sub-pixel level during image exposure, the K-3 II’s AA (anti-aliasing) filter simulator*** provides the same level of moiré reduction as an optical AA filter. Unlike an optical filter, which always creates an identical result, this innovative simulator lets the user not only switch the anti-aliasing filter effect on and off, but also to adjust the level of the effect. This means that the ideal effect can be set for a particular scene or subject.
(4) Supportive shooting functions
The K-3 II’s SR unit has a flexible design that tilts the image sensor unit in all directions. This means the K-3 II can provide a host of handy shooting functions, including auto level compensation; image-composition fine-adjustment; and ASTRO TRACER, which simplifies advanced astronomical photography.
* Lenses compatible with this mechanism: K-, KA-, KAF-, KAF2- and KAF3-mount lenses; screw-mount lenses (with an adapter); and 645- and 67-system lenses (with an adapter). Some functions are not available with certain lenses.
** When using this system, the user is advised to stabilise the camera firmly on a tripod. When a moving subject is captured in the camera’s image field, its image may not be reproduced clearly, either in part or as a whole.
*** This function works most effectively with a shutter speed of 1/1000 second or slower. This function may not be combined with some shooting modes, including the Pixel Shift Resolution system.
Dave
Always blame the equipment!!!!
Posted 12/05/2015 - 11:18
Link
Hi Dave
Thank you - yes I had come to that conclusion. However, IF they were to implement it in the way I suggested, it could utilise a much more rapid acting mechanism as you would only need to move the RGBG filter array and not the whole sensor BUT you might have fun and games keeping it very close to the actual sensor to eliminate dust intrusion or other possible optical distortions creeping!
Thank you - yes I had come to that conclusion. However, IF they were to implement it in the way I suggested, it could utilise a much more rapid acting mechanism as you would only need to move the RGBG filter array and not the whole sensor BUT you might have fun and games keeping it very close to the actual sensor to eliminate dust intrusion or other possible optical distortions creeping!
Andy
Posted 12/05/2015 - 12:30
Link
50mpCMOS wrote:
A majority of cameras from companies such as Canon and Nikon do NOT have built in flash, especially the newer releases that are due to come out from both of those companies - such as the 50mp+ models from Canon. For both of those named companies, mostly the entry level to a select few of the intermediate level models have built in fill flash.
Ironically though... Most of the Leica models do not have built in flash, but the top of the digital line Hasselblad's do have quite an impressive fill flash. I have yet to EVER see anyone use a fill flash on a Hasselblad in the real world though
The Canon EOS 7D Mark II has both inbuilt flash & GPS so it is physically possible to fit both.
Quote:
The competition all have inbuilt flash
What competition would that be?The competition all have inbuilt flash
A majority of cameras from companies such as Canon and Nikon do NOT have built in flash, especially the newer releases that are due to come out from both of those companies - such as the 50mp+ models from Canon. For both of those named companies, mostly the entry level to a select few of the intermediate level models have built in fill flash.
Ironically though... Most of the Leica models do not have built in flash, but the top of the digital line Hasselblad's do have quite an impressive fill flash. I have yet to EVER see anyone use a fill flash on a Hasselblad in the real world though
Posted 12/05/2015 - 12:37
Link
alfpics wrote:
Hi Dave
Thank you - yes I had come to that conclusion. However, IF they were to implement it in the way I suggested, it could utilise a much more rapid acting mechanism as you would only need to move the RGBG filter array and not the whole sensor BUT you might have fun and games keeping it very close to the actual sensor to eliminate dust intrusion or other possible optical distortions creeping!
Hi Andy,Hi Dave
Thank you - yes I had come to that conclusion. However, IF they were to implement it in the way I suggested, it could utilise a much more rapid acting mechanism as you would only need to move the RGBG filter array and not the whole sensor BUT you might have fun and games keeping it very close to the actual sensor to eliminate dust intrusion or other possible optical distortions creeping!
I must be more stupid than my wife tells me! I thought that the RGB function was carried out by the sensor to capture the correct colour/luminosity? Is there actually an RGBG filter over the sensor (just as the old AA filter of the K5) that can be separated?
Dave
Always blame the equipment!!!!
Posted 12/05/2015 - 13:42
Link
They won't separate the two and it is over the sensor just like the old 'AA' filter. I was corrected by Mattmatic (I think it was). In theory the RGBG could be separated off and above I was just hypothesising an alternative!
Andy
Posted 12/05/2015 - 15:36
Link
alfpics wrote:
They won't separate the two and it is over the sensor just like the old 'AA' filter. I was corrected by Mattmatic (I think it was). In theory the RGBG could be separated off and above I was just hypothesising an alternative!
I see, Andy. But in my mind that could lead to cross-bleeding of colours/ light intensity due to the physical gap - a sort of inbuilt CA generator.They won't separate the two and it is over the sensor just like the old 'AA' filter. I was corrected by Mattmatic (I think it was). In theory the RGBG could be separated off and above I was just hypothesising an alternative!
Dave
Always blame the equipment!!!!
Add Comment
To leave a comment - Log in to Pentax User or create a new account.


343 posts
14 years