K-7 mystery line
Posted 25/12/2009 - 22:30
Link
The flikering sounds worrying - like it might be a hardware problem - but in case it's just a bug in the software, I would try leaving the battery out of the camera for a few hours. That might reset it.
If that doesn't work then I think you'll need to have the camera replaced under warranty.
If that doesn't work then I think you'll need to have the camera replaced under warranty.
~Pete
Posted 25/12/2009 - 22:47
Link
Working as IT Technician, seen this quite a few times on laptop screens. It is either a bad connection (ribbon cable) from the lcd to the board or a fault with the lcd itself.
As iceblinker said. Recommend you get the camera repaired/replaced under warranty.
As iceblinker said. Recommend you get the camera repaired/replaced under warranty.
Posted 25/12/2009 - 23:35
Link
mikeglover wrote:
Working as IT Technician, seen this quite a few times on laptop screens. It is either a bad connection (ribbon cable) from the lcd to the board or a fault with the lcd itself.
As iceblinker said. Recommend you get the camera repaired/replaced under warranty.
Agreed. That's a whole column of pixels on the LCD not working, unfortunately.Working as IT Technician, seen this quite a few times on laptop screens. It is either a bad connection (ribbon cable) from the lcd to the board or a fault with the lcd itself.
As iceblinker said. Recommend you get the camera repaired/replaced under warranty.
Kevin
K7, *istDL2, SFXn, P50
DA 18-55 WR, DA 50-200, D-FA 100/2.8 Macro, F 50/1.7, DA 35/2.4AL A 28/2.8 ...
DA 18-55 WR, DA 50-200, D-FA 100/2.8 Macro, F 50/1.7, DA 35/2.4AL A 28/2.8 ...
Posted 26/12/2009 - 10:15
Link
OK, I had a feeling I might end up doing that. I'll try leaving the battery out for a few hours to see, if that doesn't work I'll have to have it replaced. =(
Thanks for your help
Thanks for your help
Posted 26/12/2009 - 12:16
Link
I would suggest demanding a replacement, if you agree to a repair it could be ages before you get it back.
The camera developed a fault in less than a week, you are well within your rights to ask for it replacing, in fact IMHO it would be a very poor retailer who tried to insist on a repair.
The camera developed a fault in less than a week, you are well within your rights to ask for it replacing, in fact IMHO it would be a very poor retailer who tried to insist on a repair.
Posted 28/12/2009 - 19:28
Link
Yes, I had to go quite a long way to get it, so I'm going to email them to make sure they have one in, then have it replaced.
I really appreciate your advice, thanks again.
I really appreciate your advice, thanks again.
Add Comment
To leave a comment - Log in to Pentax User or create a new account.


6 posts
16 years
However, today I powered it on mid-morning after showing some images on the TV (and after some shooting earlier) and was greeted with a strange vertical line down the middle of the LCD screen (Pictures below). At first it was just flickering a bit, but now it's there all the time. (Viewing shots, live view, menus - any use of the screen).
It doesn't affect the shots captured at all, it just seems to be to do with the screen. I've updated it to the latest firmware (I went from 1.00 to 1.02), recharged the battery, formatted the card, but nothing seems to have any impact on this line.
Has anyone else encountered this?
Any insight into why this might be happening would be hugely welcome, and anything I could do about it.
It's incredibly frustrating, because the K-7 is such a fantastic camera otherwise.
Thanks for your time in advance.
--------------------------------