Getting JJC RM-E7 working with Pentax K-R

SoWhat
Posted 10/02/2012 - 15:18 Link
I recently bought a JJC RM-E7 remote from ebay to use with my pentax k-r for bulb mode, for star trails. However the k-r takes no notice of the remote and nothing happens. Could you please talk me through how to get it working. I have already set the camera to have the remote open and close the shutter by pressing once at the start and once at the end (Camera settings 3, 15.)Thanks!
Blythman
Posted 10/02/2012 - 15:33 Link
Don't know about the K-r. Do you set the drive mode on the back of the camera (single shot, continuous shooting, etc)? If so change to remote
Alan


PPG
Flickr
geordie01
Posted 10/02/2012 - 16:40 Link
Set the drive mode on the camera to remote shooting and try it just setting how the remote works will not do it. the remote is best in front of the camera as that is where the sensor is.
works fine on mine
Edited by geordie01: 10/02/2012 - 16:43
wvbarnes
Posted 10/02/2012 - 16:48 Link
I have a KR and have not figured out how to use a remote with bulb mode, only remote or immediate remote 3 seconds which don't seem to include the option to use bulb as there is no second action I can figure out.

For night skies when in Greece (too much light pollution at home) I've had some success with up to sixty seconds (after that you do get processional trails) by carefully using the shutter release button without nudging the camera or tripod.

Up to 30 seconds you can of course use the remote but that won't help your trail pics.

Any one else? As I'd like to crack this one too without having to buy a K5
Gwyn
Posted 10/02/2012 - 17:03 Link
Have you set the drive mode to remote? - you do that with the four way controller on the back - press the up arrow, then select the little remote symbol - you have a choice of with or without 2 second delay. Press OK. The red light will flash to indicate it is in standby mode for the remote.

Does the remote work in another setting - such a Av?
wvbarnes
Posted 10/02/2012 - 17:14 Link
Hi, the point is how do you combine the remote symbols instant or 3 seconds with bulb mode? I don't think you can on the KX and KR. Presumably the posh models can.
Blythman
Posted 10/02/2012 - 17:22 Link
wvbarnes wrote:
Hi, the point is how do you combine the remote symbols instant or 3 seconds with bulb mode? I don't think you can on the KX and KR. Presumably the posh models can.
Got to set the camera to bulb Bill. Then in the menu there will be the option for ...to press and then release to start and finish the exposure
or ... to press to start exposure, and press to end exposure

The OP has completed that and has quoted the menu used in his post
Alan


PPG
Flickr
geordie01
Posted 10/02/2012 - 17:40 Link
Set camera to manual scroll shutter speed to bulb set drive mode to remote
instant or timed and away you go,must admit i only use instant in bulb
remember to set up remote to how you want it to fire the shutter
Edited by geordie01: 10/02/2012 - 17:41

Add Comment

To leave a comment - Log in to Pentax User or create a new account.



Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo