Firmware 1.31 causes issue on K10D?
Posted 12/06/2010 - 21:36
Link
Asking perhaps the obvious, but have you checked that the channel numbers match?
Best regards
Terry
K20D, Optio I10, DA 18-55 1:3.5-5.6 AL II, A 1:1.7/50, D FA 1:2.8/100 Macro, Sigma 70-300 1:4-5.6 APO DG Macro, Pentax AF 360FGZ
Terry
K20D, Optio I10, DA 18-55 1:3.5-5.6 AL II, A 1:1.7/50, D FA 1:2.8/100 Macro, Sigma 70-300 1:4-5.6 APO DG Macro, Pentax AF 360FGZ
Posted 14/06/2010 - 17:08
Link
Thanks for your replies guys.
Yes the channels are syncronised.
Because my issues do not appear to have been caused by the firmware update, I have started a new thread here (complete with example photos):
https://www.pentaxuser.com/forum/topic/wireless-p-ttl-flash-test-results-20805
Thanks for your help,
Adam
Yes the channels are syncronised.
Because my issues do not appear to have been caused by the firmware update, I have started a new thread here (complete with example photos):
https://www.pentaxuser.com/forum/topic/wireless-p-ttl-flash-test-results-20805
Thanks for your help,
Adam
Add Comment
To leave a comment - Log in to Pentax User or create a new account.


7 posts
16 years
USA
I recently updated the firMWARE ON MY k10D from v1.30 to v1.31
Now I am having an issue using wireless P-TTL with the built-in flash in conjuction with an AF-540FGZ.
The external flash will simply not fire when the built-in flash is set as a "controller" in the custom menu.
Can anyone else confirm if they are seeing the same issue when using an external flash?
I tried to downgrade my firmware version for further testing but wasn't able to.
Thanks in advance,
Adam