File Count
Posted 02/11/2010 - 20:47 - Helpful Comment
Link
Menu>Record Mode>Memory>File No. should be set to ON.
Best regards, John
Posted 02/11/2010 - 20:50
Link
Welcome to the forum.
press on the Menu button and then in the Rec. Menu scroll all the way down and you will find Memory.
Go in there and see if File No. is checked on.
And John is faster ^^
press on the Menu button and then in the Rec. Menu scroll all the way down and you will find Memory.
Go in there and see if File No. is checked on.
And John is faster ^^
Stefan
K10D, K5
DA* 16-50, DA* 50-135, D-FA 100 Macro, DA 40 Ltd, DA 18-55
AF-540FGZ
K10D, K5
DA* 16-50, DA* 50-135, D-FA 100 Macro, DA 40 Ltd, DA 18-55
AF-540FGZ
Posted 02/11/2010 - 20:55 - Helpful Comment
Link
Thank you John I've searched and searched to no avail!
Thanks again
Regards
Seth
Thanks again
Regards
Seth
Posted 03/11/2010 - 05:48
Link
Two notes
1)
Download the manual in PDF format; it makes searching in the manual a lot easier. E.g. from http://www.pentaximaging.com/support/manuals-and-literature/
2)
My file 'count' went from 1000 to 7000 after a service. I think this has to do with the fact that they used their own memory card which had a higher count on it.
1)
Download the manual in PDF format; it makes searching in the manual a lot easier. E.g. from http://www.pentaximaging.com/support/manuals-and-literature/
2)
My file 'count' went from 1000 to 7000 after a service. I think this has to do with the fact that they used their own memory card which had a higher count on it.
Pentax K10D + Vivitar 55/2.8 macro + Super Takumar 55/1.8 + SuperMultiCoated Takumar 85/1.8 + SuperMultiCoated Takumar 135/3.5 + SuperMultiCoated Takumar 200/4 + Super Takumar 300/4
Pentax K100D + DA18-55ALII + DA55-300
Pentax K5 + FA31Ltd + M50/1.7 + DFA100WR + M120/2.8 (+ DA18-55WR at occasion)
Pentax K100D + DA18-55ALII + DA55-300
Pentax K5 + FA31Ltd + M50/1.7 + DFA100WR + M120/2.8 (+ DA18-55WR at occasion)
Posted 03/11/2010 - 14:41
Link
sterretje wrote:
2)
My file 'count' went from 1000 to 7000 after a service. I think this has to do with the fact that they used their own memory card which had a higher count on it.
Doesn't work that way i believe.2)
My file 'count' went from 1000 to 7000 after a service. I think this has to do with the fact that they used their own memory card which had a higher count on it.
File count is saved on the board and not on the memory card.
They must have changed your board or updated it with a new firmware?
Stefan
K10D, K5
DA* 16-50, DA* 50-135, D-FA 100 Macro, DA 40 Ltd, DA 18-55
AF-540FGZ
K10D, K5
DA* 16-50, DA* 50-135, D-FA 100 Macro, DA 40 Ltd, DA 18-55
AF-540FGZ
Posted 04/11/2010 - 05:30
Link
Firmware was indeed updated. I know that the file number is not on the memory card, but the camera could have compared its filenumber with the highest one on a memory card and continued from the highest number.
But your explanantion about the firmware makes sense.
But your explanantion about the firmware makes sense.
Pentax K10D + Vivitar 55/2.8 macro + Super Takumar 55/1.8 + SuperMultiCoated Takumar 85/1.8 + SuperMultiCoated Takumar 135/3.5 + SuperMultiCoated Takumar 200/4 + Super Takumar 300/4
Pentax K100D + DA18-55ALII + DA55-300
Pentax K5 + FA31Ltd + M50/1.7 + DFA100WR + M120/2.8 (+ DA18-55WR at occasion)
Pentax K100D + DA18-55ALII + DA55-300
Pentax K5 + FA31Ltd + M50/1.7 + DFA100WR + M120/2.8 (+ DA18-55WR at occasion)
Posted 04/11/2010 - 16:52
Link
The shuttercount is what's used for creating the filenumber and the shuttercount is stored on the board.
Stefan
K10D, K5
DA* 16-50, DA* 50-135, D-FA 100 Macro, DA 40 Ltd, DA 18-55
AF-540FGZ
K10D, K5
DA* 16-50, DA* 50-135, D-FA 100 Macro, DA 40 Ltd, DA 18-55
AF-540FGZ
Add Comment
To leave a comment - Log in to Pentax User or create a new account.
2 posts
16 years
Seth