FA50mm F1.4 queries

tigershoot
Posted 01/01/2012 - 22:05 Link
As the new owner of one of Amazon's recent 'specials' I am trying to get to grips with this lens. I have tested it against a chart to check for focussing and am surprised at edge quality wide open and also CA. I would appreciate feedback from others who have this lens. Any idea why CA is totally different for the front of focus sections compared to the back? Does this sort of edge definition seem OK? Even at F8 there there seems quite a bit of CA.

These three are F1.4 to test for BF or FF. Focus accuracy seems OK but what about the edge quality?
[IMG]http://i816.photobucket.com/albums/zz88/tigershoot/FA50mm14center.jpg[/IMG]
[IMG]http://i816.photobucket.com/albums/zz88/tigershoot/FA50mm14left.jpg[/IMG]
[IMG]http://i816.photobucket.com/albums/zz88/tigershoot/FA50mm14right.jpg[/IMG]

F1.4 centre - the black toner looks purplish.
[IMG]http://i816.photobucket.com/albums/zz88/tigershoot/FA50mm14centerchart.jpg[/IMG]

F1.4 midway from centre to left edge
[IMG]http://i816.photobucket.com/albums/zz88/tigershoot/FA50mm14leftchart.jpg[/IMG]

F8 centre
[IMG]http://i816.photobucket.com/albums/zz88/tigershoot/FA50mmF8centerchart.jpg[/IMG]

F8 midway from centre to left edge
Even at F8 there there seems quite a bit of CA.
[IMG]http://i816.photobucket.com/albums/zz88/tigershoot/FA50mmF8leftchart.jpg[/IMG]


Any thoughts. I had hoped to use this as a portrait lens but I see another post reckons there's too much distortion. Is this true? Don't worry about the red and blue marks on the chart - they were there to give me more detail.
K3iii, K3ii, K-5, K-x, DA150-450mm, DA16-85WR, DA16-45, DA18-55WR, DA18-135WR, DA35 F2.4, M100mm F4 Macro, DA55-300mm, FA50mm 1.4, AF360 Flash, AF540 Flash
Transit
Posted 01/01/2012 - 23:49 Link
It is wonderful for portraits. It's worth considering the direction of light to minimise CA. There are CA removal tools in various processing programs. It benefits from a nice deep hood as well. I think the older lens coatings are not so well tuned to the digital sensor. I would recommend stopping it down to f2 or so and just shoot the real world.
Cheers
Pete
K-1 K-01 Q-7
some len

Close to the Edge
Down by the River
Edited by Transit: 01/01/2012 - 23:51
tigershoot
Posted 01/01/2012 - 23:53 Link
Thanks for your feedback. Seeing as these are still being made I would have thought that they would use the latest coatings - maybe not. I must get myself a hood I think.
K3iii, K3ii, K-5, K-x, DA150-450mm, DA16-85WR, DA16-45, DA18-55WR, DA18-135WR, DA35 F2.4, M100mm F4 Macro, DA55-300mm, FA50mm 1.4, AF360 Flash, AF540 Flash
Transit
Posted 02/01/2012 - 05:16 Link
No worries
You can use a narrower hood than the standard without vignetting due to the digital crop. Probably more effective.
Would make sense that they would upgrade the coatings, haven't heard that they have though. Maybe they just have a shed full of them left over from the 80's
Pete
K-1 K-01 Q-7
some len

Close to the Edge
Down by the River
Posted 03/01/2012 - 00:40 Link
tigershoot wrote:

Any thoughts. I had hoped to use this as a portrait lens but I see another post reckons there's too much distortion. Is this true?
You will have some perspective distortion creeping in if you shoot a head shot, but it's not a bad portrait lens.

Check out this link and look at the images attached to it, bear in mind that these were on full frame so you'll need to make the mathematical adjustment for your crop sensor.

link

As you can see at 75mm (your 50mm on a crop sensor) you are right in the area where distortion is on it's way out but it's still noticable.
DaveHolmes
Posted 04/01/2012 - 01:01 Link
I never noticed much in the way of CA or distortion in my FA50...

I have noticed an increase in sharpness wide-open since using a hood though...

However... Unless the light is really bad I rarely open up to 1.4... From 2.8 (for extreme subject isolation)to 5.6 is where this lens is normally shot from for me...
........................................................................
Digital:
Pentax K5- Vivitar 19mm 3.8; FA35mm f2; D-Xenon 100mm macro f2.8; DA50-200mm WR...
Flash:
Yongnuo YN-560; Vivitar 285HV; Cactus V4 triggers...
Film:
Pentax-MX & M50mm f1.4; Spottie & 55mm f1.8; MG & M40mm 2.8...

https://www.flickr.com/photos/daveholmesphotos/
Pentaxophile
Posted 04/01/2012 - 11:23 Link
Different wavelengths of light (colours) are not being brought into focus at exactly the same points, which is why you are seeing colour shifts around high contrast edges. The sort of effect shown at f8 will not really be an issue in real life shots (and can easily be corrected in PP). The colour shift at f1.4 is similarly caused, and isn't unusual for a wide aperture lens. I am not sure effect coatings would have on this, very little I would have thought.
Dwiea
Posted 04/01/2012 - 16:14 Link
What kind of lens hoods would you guys suggest? Would this rubber Hama lens hood be okay to use with the FA 50mm ?
johnriley
Posted 04/01/2012 - 16:39 Link
The best one is this one:

http://www.srsmicrosystems.co.uk/403/Pentax-SMCP-M-49mm-Square-Lens-Hood.html

Fast, convenient and good for the new 35mm f2.4 as well. However, not a nice price, so maybe eBay and second hand is a thought. Cheap copies are nowhere near as well made.
Best regards, John
DaveHolmes
Posted 04/01/2012 - 17:27 Link
johnriley wrote:
The best one is this one:

http://www.srsmicrosystems.co.uk/403/Pentax-SMCP-M-49mm-Square-Lens-Hood.html

Fast, convenient and good for the new 35mm f2.4 as well. However, not a nice price, so maybe eBay and second hand is a thought. Cheap copies are nowhere near as well made.
Chinese copy from ebay £7 delivered
........................................................................
Digital:
Pentax K5- Vivitar 19mm 3.8; FA35mm f2; D-Xenon 100mm macro f2.8; DA50-200mm WR...
Flash:
Yongnuo YN-560; Vivitar 285HV; Cactus V4 triggers...
Film:
Pentax-MX & M50mm f1.4; Spottie & 55mm f1.8; MG & M40mm 2.8...

https://www.flickr.com/photos/daveholmesphotos/
Posted 04/01/2012 - 18:34 Link
I have the FA50 F1.4 too, and TBH CA control is not bad at all after F2
As for a lens hood, I use one of these:-

link

Works a treat and cheap too.
Some Cameras
whatsthisbuttondo
Posted 04/01/2012 - 18:46 Link
I got one £9.50 square one looks same as john rileys recommendation on ebay its fine
Dwiea
Posted 04/01/2012 - 20:15 Link
Heh sorry OP for hijacking the thread with discussion on lens hoods.

The price of the pentax lens hood @ SRS is insane o_O

Does anyone know if the ebay style square lens hood can be fitted backwards onto the lens to take up less space when storing?
whatsthisbuttondo
Posted 04/01/2012 - 20:25 Link
Mine cant as clips on same as lens cap
Pete
Algernon
Posted 04/01/2012 - 20:47 Link
Just get a parallel circular one with 49mm thread at both ends.
I use a 52mm version on some K lenses, but I've now put a 52/49mm
stepdown ring on it to use it on the DA 35mm f/2.4. I use a 52mm
snap-on lens cap that hasn't got any projections to catch anything.
Half Man... Half Pentax ... Half Cucumber

Pentax K-1 + K-5 and some other stuff

Algi
Edited by Algernon: 04/01/2012 - 20:48

Add Comment

To leave a comment - Log in to Pentax User or create a new account.



Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo