Electronic shutter on K1
Posted 03/01/2017 - 21:23
Link
I can't be certain, but to me the problem with pic1 looks more like poor focus than camera shake as it's fuzzy all over and not sharp at all. Whether its front focussing or back focussing I wouldn't like to say.
Have you tested the lens for this? A similar shot at an angle might indicate a point of sharp focus and prove it one way or the other, be that front/back focussing or shake if still nothing is sharp.
Conversely, I would expect camera shake to exhibit some direction of the movement but look sharper, but cannot see any evidence of this.
With pic 2 you've set the focus visually on screen rather than rely on the camera's TTL system which is prone to front/back focussing issues unless adjusted for, and it's not always reliable then. Some lenses are worse for this than others. Bring back the manual focus split prism!!
Have you tested the lens for this? A similar shot at an angle might indicate a point of sharp focus and prove it one way or the other, be that front/back focussing or shake if still nothing is sharp.
Conversely, I would expect camera shake to exhibit some direction of the movement but look sharper, but cannot see any evidence of this.
With pic 2 you've set the focus visually on screen rather than rely on the camera's TTL system which is prone to front/back focussing issues unless adjusted for, and it's not always reliable then. Some lenses are worse for this than others. Bring back the manual focus split prism!!
John K
Posted 03/01/2017 - 22:36
Link
I don't think No.1 is poor focus, it looks exactly like camera shake to me. You simply cannot get away with 1/30 second, even on a tripod, when using a 300mm lens and TC, unless there is absolutely zero movement of the equipment.
Shutter is very likely to have caused it I would have thought, I think Algi is right and the question was answered already by the original post.
Regards
David
Shutter is very likely to have caused it I would have thought, I think Algi is right and the question was answered already by the original post.
Regards
David
Posted 03/01/2017 - 22:51
Link
Problem solved.
It is shutter induced tripod vibrations...caused by the tripod/head not being up to the job. I rested the lens foot on my kitchen granite worktop and was able to get the same sharp image using normal remote ; mirror lock-up ; and electronic shutter.
I guess if I want to use that lens/TC combo I will have to use electronic shutter or invest in a much sturdier tripod. At least I know how to test one out when I come to buy it.
The first picture in original post was definately shake. I was able to repeat the same blury/sharp consecutive images again and again without fail by switching from mechanical to electronic shutter.
It is shutter induced tripod vibrations...caused by the tripod/head not being up to the job. I rested the lens foot on my kitchen granite worktop and was able to get the same sharp image using normal remote ; mirror lock-up ; and electronic shutter.
I guess if I want to use that lens/TC combo I will have to use electronic shutter or invest in a much sturdier tripod. At least I know how to test one out when I come to buy it.
The first picture in original post was definately shake. I was able to repeat the same blury/sharp consecutive images again and again without fail by switching from mechanical to electronic shutter.
Peter
My Flickr page
My Flickr page
Posted 04/01/2017 - 08:00
Link
'Shutter induced tripod vibrations' .... I admit to being amazed that could cause such a blurriness! What I couldn't understand was why the electronic shutter exposure (which is still 1/30th sec, right?) could be so sharp? Surely there would still be general shake going on just by the instability of the setup .... or is it truly the case that all of the movement is generated by the shutter moving ... ?
My Guides to the Pentax Digital Camera Flash Lighting System : Download here from the PentaxForums Homepage Article .... link
Pentax K7 with BG-4 Grip / Samyang 14mm f2.8 ED AS IF UMC / DA18-55mm f3.5-5.6 AL WR / SMC A28mm f2.8 / D FA 28-105mm / SMC F35-70 f3.5-4.5 / SMC A50mm f1.7 / Tamron AF70-300mm f4-5.6 Di LD macro / SMC M75-150mm f4.0 / Tamron Adaptall (CT-135) 135mm f2.8 / Asahi Takumar-A 2X tele-converter / Pentax AF-540FGZ (I & II) Flashes / Cactus RF60/X Flashes & V6/V6II Transceiver
Pentax K7 with BG-4 Grip / Samyang 14mm f2.8 ED AS IF UMC / DA18-55mm f3.5-5.6 AL WR / SMC A28mm f2.8 / D FA 28-105mm / SMC F35-70 f3.5-4.5 / SMC A50mm f1.7 / Tamron AF70-300mm f4-5.6 Di LD macro / SMC M75-150mm f4.0 / Tamron Adaptall (CT-135) 135mm f2.8 / Asahi Takumar-A 2X tele-converter / Pentax AF-540FGZ (I & II) Flashes / Cactus RF60/X Flashes & V6/V6II Transceiver
Posted 04/01/2017 - 11:11
Link
The Gitzo tripod cost about £200 I think 10 years ago. I remember at the time going for a 4 leg section design (shorter when folded up) and a relatively light one to make it easy to carry around. A 3 leg section would possibly have been a better choice. I have not used it a great deal and not with such a heavy camera/lens setup that I now have. Perhaps the resonance created by the shutter movement causes the problems with my tripod and head that it wouldn't do with another.
http://www.manfrotto.com.br/gitzo/gitzo/product/0/G1298/_/SER._2_BASALT_TRIPOD_4...
http://www.manfrotto.com.br/gitzo/gitzo/product/0/G1298/_/SER._2_BASALT_TRIPOD_4...
Peter
My Flickr page
My Flickr page
Posted 04/01/2017 - 11:44
Link
I know the K1 shutter is big, but wow, I am taken aback by the extent of that blurred effect, considering all the other factors were identical between the two different exposure techniques.
My Guides to the Pentax Digital Camera Flash Lighting System : Download here from the PentaxForums Homepage Article .... link
Pentax K7 with BG-4 Grip / Samyang 14mm f2.8 ED AS IF UMC / DA18-55mm f3.5-5.6 AL WR / SMC A28mm f2.8 / D FA 28-105mm / SMC F35-70 f3.5-4.5 / SMC A50mm f1.7 / Tamron AF70-300mm f4-5.6 Di LD macro / SMC M75-150mm f4.0 / Tamron Adaptall (CT-135) 135mm f2.8 / Asahi Takumar-A 2X tele-converter / Pentax AF-540FGZ (I & II) Flashes / Cactus RF60/X Flashes & V6/V6II Transceiver
Pentax K7 with BG-4 Grip / Samyang 14mm f2.8 ED AS IF UMC / DA18-55mm f3.5-5.6 AL WR / SMC A28mm f2.8 / D FA 28-105mm / SMC F35-70 f3.5-4.5 / SMC A50mm f1.7 / Tamron AF70-300mm f4-5.6 Di LD macro / SMC M75-150mm f4.0 / Tamron Adaptall (CT-135) 135mm f2.8 / Asahi Takumar-A 2X tele-converter / Pentax AF-540FGZ (I & II) Flashes / Cactus RF60/X Flashes & V6/V6II Transceiver
Posted 04/01/2017 - 12:16
Link
Extensive testing was done about shutter blur on the K-7 and a little bit on the later K-5. A lot of the problems were fixed with the K-5. See the top graph....
http://blog.falklumo.com/search/label/shake%20reduction
Stay clear of speeds between about 1/40th and 1/125th with a K-7 See exposure chart at bottom.
Using flash as the main source especially at about 1/2 power or less should miss all the blur, because the duration of the flash will be 1/1000th or less.
You can still get acceptable results with a K-5 + 500mm lens at 1/320th with Sigma SR on and tripod mounted. Pentax SR doesn't really do much at fast shutter speeds. It's made for 1/25th sec.
100% Crop 400ISO K-5 + Sigma 150-500mm at f/8 Auto-Focus

--
http://blog.falklumo.com/search/label/shake%20reduction
Stay clear of speeds between about 1/40th and 1/125th with a K-7 See exposure chart at bottom.
Using flash as the main source especially at about 1/2 power or less should miss all the blur, because the duration of the flash will be 1/1000th or less.
You can still get acceptable results with a K-5 + 500mm lens at 1/320th with Sigma SR on and tripod mounted. Pentax SR doesn't really do much at fast shutter speeds. It's made for 1/25th sec.
100% Crop 400ISO K-5 + Sigma 150-500mm at f/8 Auto-Focus

--
Half Man... Half Pentax ... Half Cucumber
Pentax K-1 + K-5 and some other stuff
Algi
Pentax K-1 + K-5 and some other stuff
Algi
Posted 04/01/2017 - 12:40
Link
Gee, lucky I use a lot of flash with my K7 !! Actually, I've never noticed any such problems at any shutter speeds with the K7. although I don't use 300mm or more on tripods much at all. Shake Reduction seems to deal with things very well for me when handholding at shutter speeds in that range you mentioned.
My Guides to the Pentax Digital Camera Flash Lighting System : Download here from the PentaxForums Homepage Article .... link
Pentax K7 with BG-4 Grip / Samyang 14mm f2.8 ED AS IF UMC / DA18-55mm f3.5-5.6 AL WR / SMC A28mm f2.8 / D FA 28-105mm / SMC F35-70 f3.5-4.5 / SMC A50mm f1.7 / Tamron AF70-300mm f4-5.6 Di LD macro / SMC M75-150mm f4.0 / Tamron Adaptall (CT-135) 135mm f2.8 / Asahi Takumar-A 2X tele-converter / Pentax AF-540FGZ (I & II) Flashes / Cactus RF60/X Flashes & V6/V6II Transceiver
Pentax K7 with BG-4 Grip / Samyang 14mm f2.8 ED AS IF UMC / DA18-55mm f3.5-5.6 AL WR / SMC A28mm f2.8 / D FA 28-105mm / SMC F35-70 f3.5-4.5 / SMC A50mm f1.7 / Tamron AF70-300mm f4-5.6 Di LD macro / SMC M75-150mm f4.0 / Tamron Adaptall (CT-135) 135mm f2.8 / Asahi Takumar-A 2X tele-converter / Pentax AF-540FGZ (I & II) Flashes / Cactus RF60/X Flashes & V6/V6II Transceiver
Posted 04/01/2017 - 12:51
Link
Often measured blur isn't noticeable in the results because it's too small to be seen by the naked eye.
--
--
Half Man... Half Pentax ... Half Cucumber
Pentax K-1 + K-5 and some other stuff
Algi
Pentax K-1 + K-5 and some other stuff
Algi
Posted 04/01/2017 - 12:59
Link
I suppose so ... lucky K1 owners then that they have the new electronic shutter option. Actually, lucky K1 owners generally
My Guides to the Pentax Digital Camera Flash Lighting System : Download here from the PentaxForums Homepage Article .... link
Pentax K7 with BG-4 Grip / Samyang 14mm f2.8 ED AS IF UMC / DA18-55mm f3.5-5.6 AL WR / SMC A28mm f2.8 / D FA 28-105mm / SMC F35-70 f3.5-4.5 / SMC A50mm f1.7 / Tamron AF70-300mm f4-5.6 Di LD macro / SMC M75-150mm f4.0 / Tamron Adaptall (CT-135) 135mm f2.8 / Asahi Takumar-A 2X tele-converter / Pentax AF-540FGZ (I & II) Flashes / Cactus RF60/X Flashes & V6/V6II Transceiver
Pentax K7 with BG-4 Grip / Samyang 14mm f2.8 ED AS IF UMC / DA18-55mm f3.5-5.6 AL WR / SMC A28mm f2.8 / D FA 28-105mm / SMC F35-70 f3.5-4.5 / SMC A50mm f1.7 / Tamron AF70-300mm f4-5.6 Di LD macro / SMC M75-150mm f4.0 / Tamron Adaptall (CT-135) 135mm f2.8 / Asahi Takumar-A 2X tele-converter / Pentax AF-540FGZ (I & II) Flashes / Cactus RF60/X Flashes & V6/V6II Transceiver
Posted 04/01/2017 - 14:03
Link
This isn't something new and has always plagued SLR designs. Normally the biggest problem is "mirror slap" which causes much more vibration than shutters ever will. Depending on the design, around 1/125s is the most suspect area. This is worse with larger mirrors of course, so will need more attention on medium format SLRs.
Despite all this woe, we still seem to be able to take sharp pictures.
Despite all this woe, we still seem to be able to take sharp pictures.
Best regards, John
Posted 04/01/2017 - 14:25
Link
The approx. 2 second delay (or mirror up) completely removes any vibrations due to the mirror from the problem with DSLR's. The mirror is also up in LV.
The blur can often clearly be seen with 10-12mm WA lenses. Falk must also think it's sufficiently visible on other focal lengths to take the bite off, because he's shown a tack sharp line on his graph.
--
The blur can often clearly be seen with 10-12mm WA lenses. Falk must also think it's sufficiently visible on other focal lengths to take the bite off, because he's shown a tack sharp line on his graph.
--
Half Man... Half Pentax ... Half Cucumber
Pentax K-1 + K-5 and some other stuff
Algi
Pentax K-1 + K-5 and some other stuff
Algi
Posted 04/01/2017 - 17:25
Link
I had a strange shake on my K-3 around 1/80 to 1/125 that I attributed to shutter shake. It was due to the shutter shake being magnified by my handholding technique. I suppose this range is still susceptible to mirror/shutter shake. Try other speeds to see if there's anything that can improve.
All the gear with no idea
Add Comment
To leave a comment - Log in to Pentax User or create a new account.


8880 posts
16 years
Lancashire
You can actually see how unstable the system is by trying to MF using the viewfinder. It will be difficult due to how easy it is to cause the camera to shake.
Nearly all shots contain some blur caused by vibrations, even on mirrorless cameras. I haven't got a K-1 but imagine that it works similar to Nikons system. I haven't read all this link, partly because I only have a K-5...
http://nps.nikonimaging.com/technical_solutions/d810_tips/the_electronic_front/
Apart from problems with long lenses the other area that this type of vibration causes problems is with microscope mounted cameras...
http://www.krebsmicro.com/Canon_EFSC/
--
Pentax K-1 + K-5 and some other stuff
Algi