Dirty Sensor - Glasgow help?
Posted 06/02/2010 - 20:18
Link
Sorry I'm not near Glasgow.
A blower can be bought cheaply from any camera shop or online. The "Rocket Blower" is very good, but any large blower should do.
Blowing doesn't always work, but it is cheap! To prevent too much dust blowing about elsewhere in the camera, place the blower tip pretty close to the sensor. Pentax tell you not to do this, but it's actually ok if you take care and ensure the battery is well charged.
A blower can be bought cheaply from any camera shop or online. The "Rocket Blower" is very good, but any large blower should do.
Blowing doesn't always work, but it is cheap! To prevent too much dust blowing about elsewhere in the camera, place the blower tip pretty close to the sensor. Pentax tell you not to do this, but it's actually ok if you take care and ensure the battery is well charged.
~Pete
Posted 06/02/2010 - 20:27
Link
Iv'e tried the blower on 2 cameras ,my ISTDS and my K20D...on both occasions I ended up blowing dust up into the focus screen!....It went in the bin and I invested in an arctic butterfly!......a wonderful tool,and so simple to use !.....Hitch a lift down here and I'll do it for you in 2mins!.......Ken
K20D...ist DS ,DA18/55,DA16/45.DA* 50/135,"A"1.7 50MM..."A" 70/210..M 50mm f2...Tamron 90mm macro,28/300 Tamron,200/500 Tamron 6.9....A Pentax DA*300... Sigma10/20,FA31mm 1.8 Ltd*********,FA 77mm Ltd!
Posted 06/02/2010 - 20:55
Link
Thanks for your advice. Now I dont know what to do How much does usually professional cleaning cost?
Posted 06/02/2010 - 21:03
Link
How bad is it? Can't you get by for now with just cloning out the spots?
Which camera do you have? Does it have a sensor cleaner which may shake off the dust?
Isn't Gartmore in Glasgow? you could maybe PM him?
Which camera do you have? Does it have a sensor cleaner which may shake off the dust?
Isn't Gartmore in Glasgow? you could maybe PM him?
Posted 06/02/2010 - 21:06
Link
50 euro??? well, this is like a 25% of my camera value
Posted 06/02/2010 - 21:08
Link
I know. It was the first time I'd had it done professionally and was disappointed to see them using a blower, just like I would have done......
so I'll be cleaning myself next time.
Bret
so I'll be cleaning myself next time.
Bret
my pics: link
my kit: K3, K5, K-01, DA 18-55, D-FA50 macro, Siggy 30/1.4, 100-300/f4, 70-200/2.8, Samsung 12-24/f4, Tamron 17-50, and lots of other bits.
my kit: K3, K5, K-01, DA 18-55, D-FA50 macro, Siggy 30/1.4, 100-300/f4, 70-200/2.8, Samsung 12-24/f4, Tamron 17-50, and lots of other bits.
Posted 06/02/2010 - 21:12
Link
thanks for comment. maybe some forum member will be kind enough to help me.
Posted 06/02/2010 - 21:12
Link
Save your money and buy an Arctic Butterfly. Meanwhile learn how to clone .
Posted 06/02/2010 - 21:13
Link
The arctic butterfly is £44.99 from SRS!......I've had mine for 5 years now and it's still going strong......and still doing an excellent job...well worth the investment.......Ken
K20D...ist DS ,DA18/55,DA16/45.DA* 50/135,"A"1.7 50MM..."A" 70/210..M 50mm f2...Tamron 90mm macro,28/300 Tamron,200/500 Tamron 6.9....A Pentax DA*300... Sigma10/20,FA31mm 1.8 Ltd*********,FA 77mm Ltd!
Posted 06/02/2010 - 21:16
Link
I have no problem with cloning, it is just a strange feeling to know that these three spots are there And don't fancy cloning every single photo.
Posted 06/02/2010 - 21:24
Link
They have a place in Glasgow I see!.......£35inc VAT!.....Good link Techno!
K20D...ist DS ,DA18/55,DA16/45.DA* 50/135,"A"1.7 50MM..."A" 70/210..M 50mm f2...Tamron 90mm macro,28/300 Tamron,200/500 Tamron 6.9....A Pentax DA*300... Sigma10/20,FA31mm 1.8 Ltd*********,FA 77mm Ltd!
Add Comment
To leave a comment - Log in to Pentax User or create a new account.


258 posts
16 years
Glasgow
Unless you guys know how to un-dust the sensor without this type of equipment. Thanks
Pietrach