Did focus screens change ?

johnriley
Posted 28/01/2011 - 15:28 Link
Pentax offer a selection of screens that are actually designed for the job.
Best regards, John
Algernon
Posted 28/01/2011 - 17:22 Link
Nobody thought of that!
Half Man... Half Pentax ... Half Cucumber

Pentax K-1 + K-5 and some other stuff

Algi
Transit
Posted 29/01/2011 - 10:13 Link
Algernon wrote:
The screen catcher is a good idea, even for someone just removing a screen.
Mate

Algernon wrote:

I notice that your original page has a link to greyhounman's site in which he says the DS and ME Super screens are both about 1.5mm thick.

I think some of the Chinese suppliers use a FF Nikon screen, which is widely available retail.
I hadn't thought to buy a new screen to cut down !
saves jinfinance doing it
K-1 K-01 Q-7
some len

Close to the Edge
Down by the River
Transit
Posted 29/01/2011 - 10:22 Link
johnriley wrote:
It gets worse...a Nikon screen cut down and put into a Pentax camera? Maybe it's just me, but I'm amazed that anyone would even consider it as an option.
hehe It's the Kiwi spirit, why buy the shelf item when there is savings to be made and fun to be had

greynolds999 wrote:
Just be careful. I seem to remember that split focussing screens can affect the cameras autofocus - it's been a while since I heard this but know there are a couple of old threads somewhere.
thanks for the heads up, will check carefully. The old K100D efforts seemed uneffected though metering did vary.

gartmore wrote:
I'm just amazed that anyone could be bothered with the hastle and the lack of precision in a critical component, I think John is referring to spoiling your new camera, not the old one
I see it as interesting project rather than a hassle. I am not finding a lot of precision with my MF due to my eyesight and the typical non pop stock screen. I'm gaging for a split again. Not worried about hurting the K-7...I have the nifty screen catcher and the wee hooky thing !

Pete
K-1 K-01 Q-7
some len

Close to the Edge
Down by the River
Edited by Transit: 29/01/2011 - 10:24
Transit
Posted 29/01/2011 - 10:29 Link
Algernon wrote:
A split-screen isn't that accurate anyway. I mentioned in another
thread that I've just tried my old ME-F with the 35-70mm AF Zoom
and it still works a treat Switching to a MF 50mm f/1.4 the
Green light is very sensitive much better than on digitals. It
even lights up 2 red arrows showing which way to focus, but the
split-image shows in focus even when the red leds are on.

No idea how it knows which way you have to turn the MF lens
sounds like we lost a good feature since then

Algernon wrote:
Well you could always have a Canon one instead!
hehe, don't the hallowed Katzeyes just chop up and mark off the shelf OM items ?
K-1 K-01 Q-7
some len

Close to the Edge
Down by the River
Transit
Posted 29/01/2011 - 10:35 Link
johnriley wrote:
Pentax offer a selection of screens that are actually designed for the job.
there's a thought but introduces the budgetry issue sadly. Can only find 2 at Pentax but no split, and at least $100 to me anyway.
K-1 K-01 Q-7
some len

Close to the Edge
Down by the River
Edited by Transit: 29/01/2011 - 10:42
Transit
Posted 08/02/2011 - 11:08 Link
Well the P30T arrived. The screen seems very bright, the split collar doesn't partially black out until f8 and the diagonal split is extremely finely etched. Can't wait to get it on-board the K-7

Pete
K-1 K-01 Q-7
some len

Close to the Edge
Down by the River
johnriley
Posted 08/02/2011 - 11:54 Link
Do you really really want to do that Pete? It isn't intended for the K-7, despite a few people having a go at grinding down the screens and putting them in anyway. Why not have a word with one of the repair houses first to make sure?
Best regards, John
robbie_d
Posted 08/02/2011 - 12:45 Link
Will it actually damage the K-7, or is it a case of just putting the old one back in if it doesn't work?

I had a couple of generic brand "split-prism with collar" screens in my K-m (£15 and under from Ebay) which worked fine. Pete is essentially doing the same process that the guys in China/Korea are doing (albeit a little more manually).

When I no longer needed the manual focus precision of my split-prism screens I simply popped them out and put the original back in.

Simples.
If you can't say something nice about Pentax, you won't say anything at all.

Apparently.
johnriley
Posted 08/02/2011 - 13:27 Link
The potential for damage might be there if, for example, a screen was too thick and ended up being forced in. The potential for damage is there when the screens are changed. If the screen is cut, how about the dust and debris created by the cutting? Screens should not be cleaned as they are so soft.

Come to that, will the screen be loacted correctly, will the split image be truly central, will the fresnel screen be the right pitch for a DSLR?

DIY solutions with precision instruments like cameras, rightly or wrongly, come across as being a bit dismissive about the potential dowfalls to me.
Best regards, John
robbie_d
Posted 08/02/2011 - 13:28 Link
johnriley wrote:
The potential for damage might be there if, for example, a screen was too thick and ended up being forced in. The potential for damage is there when the screens are changed. If the screen is cut, how about the dust and debris created by the cutting? Screens should not be cleaned as they are so soft.

Come to that, will the screen be loacted correctly, will the split image be truly central, will the fresnel screen be the right pitch for a DSLR?

DIY solutions with precision instruments like cameras, rightly or wrongly, come across as being a bit dismissive about the potential dowfalls to me.
All fair points.
If you can't say something nice about Pentax, you won't say anything at all.

Apparently.
Cuchulainn
Posted 09/02/2011 - 00:27 Link
If you do end up doing a job on the screen could you take photos while you work and show us the results? I love hearing about these kinds of hardware mods/hacks
Transit
Posted 09/02/2011 - 03:46 Link
Cuchulainn wrote:
If you do end up doing a job on the screen could you take photos while you work and show us the results? I love hearing about these kinds of hardware mods/hacks
I was actually considering a movie !
I documented the K100D screen I previously did here.
I like gear hack projects too

as I am likely to be in the workshop(furniture) for part of this process I thought the sliding table saw might be a good travelling stage for a movie,Peter Jackson look out
Pete
K-1 K-01 Q-7
some len

Close to the Edge
Down by the River
Edited by Transit: 09/02/2011 - 03:56
Transit
Posted 09/02/2011 - 03:53 Link
johnriley wrote:
The potential for damage might be there if, for example, a screen was too thick and ended up being forced in. The potential for damage is there when the screens are changed. If the screen is cut, how about the dust and debris created by the cutting? Screens should not be cleaned as they are so soft.

Come to that, will the screen be loacted correctly, will the split image be truly central, will the fresnel screen be the right pitch for a DSLR?

DIY solutions with precision instruments like cameras, rightly or wrongly, come across as being a bit dismissive about the potential dowfalls to me.
Dear John,
Thanks very much for your concern ! All your points are well founded.
Please rest assured I have researched this well before I did the K100D job.
I carefully lower the screen holder taking care to protect mirror.
I never handle the screens face.
The cut screen is protected by tape that is removed after the resize. There was no cutting debris on it.
I will use a micrometer to check screen thickness to avoid stressing tray.
The centre is easily centred
The fresnel pitch is in the hands of the hack gods.
The MG screen I had on the K100D seemed fine. This latest one seems super bright.

best wishes
Pete
K-1 K-01 Q-7
some len

Close to the Edge
Down by the River

Add Comment

To leave a comment - Log in to Pentax User or create a new account.



Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo