DA* 300 1st Attempt

terje-l
Posted 17/03/2009 - 10:04 Link
impotentspider wrote:
There are various ways to set the dioptre adjustment, I use the method suggested in the manual, let the camera auto-focus on a bright distant object then adjust the dioptre till it look sharp through the viewfinder
The best method to adjust the dioptre is to point the camera at a white surface and adjust the dioptre till the black marking lines in the viewfinder are tack sharp (don't worry about the image).
Best regards
Terry

K20D, Optio I10, DA 18-55 1:3.5-5.6 AL II, A 1:1.7/50, D FA 1:2.8/100 Macro, Sigma 70-300 1:4-5.6 APO DG Macro, Pentax AF 360FGZ
bforbes
Posted 17/03/2009 - 10:36 Link
[quote:3496ace15f="impotentspider"]
Quote:


There are various ways to set the dioptre adjustment, I use the method suggested in the manual, let the camera auto-focus on a bright distant object then adjust the dioptre till it look sharp through the viewfinder, of course this goes belly up if your camera suffers from front or back focusing but try it and see if it improves.

PS I think the beanbag is the best option in a hide.
Thanks for all the advice people. i've checked the dioptre setting and the camera focus. The camera was focusing 10mm back so i've tried to correct this, and a bean bag is on order.

Thanks Again
Posted 18/03/2009 - 21:02 Link
bforbes wrote:
Where am I going wrong?

Any Help Please
general rule of thumb without SR I have used is shutter speed at 1/2xfocal length, so you need around 1/600th for a 300mm lens, depending how wobbly you are you may manage 1/1x or slightly better i.e 1/300th

for #1 it's 1/125 sec, F4, ISO200, AF-S mode, SR not ready, AF points in focus = centre,
so camera shake poss, also as the SR wasn't ready you need to wait for the SR signal in the viewfinder to be on to rely on it, even then assume 2stops, hope for more, but he's probably twitched a bit, looking at the motion blur on the paws.

For #2 it's 1/60th sec,
secondly Exif data focus mode says MF and AF points in focus says none.

that suggests to me (assuming I'm interpreting data correctly) that you used manual focus and you were a bit off.

#3 robin : Aperture: F5.6, Exposure time: 1/15", ISO speed rating: 100/21°. Focus Mode: AF-S, SR Result: stabilized, AF Points In Focus: Center

problem ? camera shake - too slow shutter speed.

#4 : Aperture: F6.7, Exposure time: 1/125", ISO speed rating: 400/27°, SR Result: stabilized, AF Points In Focus: Center.
problem ? hmmm the shutter speed is low, but to me it just looks mis-focused ? better luck next time ?

Add Comment

To leave a comment - Log in to Pentax User or create a new account.



Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo