Cable release for K5
Posted 18/01/2012 - 17:48
Link
There's probably a setting in the camera menu to allow
AF with a remote, similar to the K20D
AF with a remote, similar to the K20D
Half Man... Half Pentax ... Half Cucumber
Pentax K-1 + K-5 and some other stuff
Algi
Pentax K-1 + K-5 and some other stuff
Algi
Posted 18/01/2012 - 18:08
Link
There is [C-18] and it's set to 2.
I have an IR remote which works correctly with this set, but not when set to 1.
I was wanting to use the digital timer remote to set up a series of shots, and whilst I can manually focus or use the AF button to do what I want I noticed the cable remote(s) wouldn't invoke a focus which suggests (to me at least) that maybe the pinouts are different, hence the question.
Bernard
I have an IR remote which works correctly with this set, but not when set to 1.
I was wanting to use the digital timer remote to set up a series of shots, and whilst I can manually focus or use the AF button to do what I want I noticed the cable remote(s) wouldn't invoke a focus which suggests (to me at least) that maybe the pinouts are different, hence the question.
Bernard
Posted 18/01/2012 - 20:55
Link
I just tried my cable release in my K-5 and it auto-focusses just fine. I have a JJC which was meant for a Canon.
Posted 18/01/2012 - 21:01
Link
Check the plug is wired like this:
http://www.doc-diy.net/photo/remote_pinout/
I'm offline now until tomorrow
http://www.doc-diy.net/photo/remote_pinout/
I'm offline now until tomorrow
Half Man... Half Pentax ... Half Cucumber
Pentax K-1 + K-5 and some other stuff
Algi
Pentax K-1 + K-5 and some other stuff
Algi
Posted 19/01/2012 - 09:10
Link
Just checked mine with the Pentax "CS-205 Cable Switch For Remote Shutter Release" and it focused first.... no problems.
Camera was on:
M exposure
NO SR (on tripod so I switched it off)
AF-S (GREEN)
Camera was on:
M exposure
NO SR (on tripod so I switched it off)
AF-S (GREEN)
Half Man... Half Pentax ... Half Cucumber
Pentax K-1 + K-5 and some other stuff
Algi
Pentax K-1 + K-5 and some other stuff
Algi
Posted 19/01/2012 - 13:50
Link
Thanks all
Problem solved -
Both releases had a wire loose to the focusing
The plug end on the home built one
The switch connection on the commercial one.
And to cap it all I found the wire into one of the probes of my multimeter is intermittent.
What are the odds of that?
So soldering iron out and repairs done. Note to self - check thoroughly next time.
At least I didn't take the camera apart, then discover a loose wire in the multimeter.
Anyway thanks for checking. I didn't want to mess up my new camera, if the pin outs had have been different.
Regards
Bernard
Problem solved -
Both releases had a wire loose to the focusing
The plug end on the home built one
The switch connection on the commercial one.
And to cap it all I found the wire into one of the probes of my multimeter is intermittent.
What are the odds of that?
So soldering iron out and repairs done. Note to self - check thoroughly next time.
At least I didn't take the camera apart, then discover a loose wire in the multimeter.
Anyway thanks for checking. I didn't want to mess up my new camera, if the pin outs had have been different.
Regards
Bernard
Posted 19/01/2012 - 16:34
Link
Algernon wrote:
Check the plug is wired like this:
http://www.doc-diy.net/photo/remote_pinout/
I'm offline now until tomorrow
Algi,Check the plug is wired like this:
http://www.doc-diy.net/photo/remote_pinout/
I'm offline now until tomorrow
A most interesting site.
I rather like the multi-function trigger device based around the ATmega88V but have no facilties for programming it
regards
Bernard
Posted 19/01/2012 - 16:57
Link
Glad to hear it was easy to sort out.
There is some interesting stuff on that site
There is some interesting stuff on that site
Half Man... Half Pentax ... Half Cucumber
Pentax K-1 + K-5 and some other stuff
Algi
Pentax K-1 + K-5 and some other stuff
Algi
Add Comment
To leave a comment - Log in to Pentax User or create a new account.


1776 posts
17 years
Burton upon Trent
Is the cable release for the K5 the same as that for the K10D.
I have a homemade one which provides focus and shutter via a small twin+earth jack plug
I also have a commercial one which provides timed/delay timed shutter release.
When I tried them on the K5 the focus didn't operate although the shutter did.
Bernard