Search results for 'back focus' - page 2065

Use * as a wildcard for partial matches


K5 lens calibration shifting?

I was doing a shoot in a studio on Saturday and when zooming in to 8X on the face on the rear screen to check focus it didn't look sharp, in the end I went back to using an older body to finish the shoot. Looking at the K5 images they do not appear as sharp as they have been in the past, they are s...

Posted by timbo on 19/02/2012 - 18:55

Pentax Auto Bellows & K5 advice needed

I have that bellows unit, Andy, & use it with my K7. Have you tried releasing the camera mounting ring from the unit? When looking from the camera end, it's the chrome/knurled locking knob on the right. Mount the camera to the ring then, with the rear standard as far back as it will go, locate t...

Posted by coker on 20/02/2012 - 17:56

Pentax Auto Bellows & K5 advice needed

For what it's worth, I had the same problem with the MZ-S and found that any of the Pentax auto extension tubes can be used to retro-fit the bellows unit to the camera. I haven't had any real chance to take any pictures that way yet but I used a #1 tube to connect the camera body to the bellows. U...

Posted by CrazyCanuck on 29/03/2012 - 17:33

ME-F Electronic focus indicator problem

Hi All, I've just picked up an ME-F which appears to have a fault with the electronic focus indicator. When turning the AF on (or activating the meter from a half press of the shutter relase), I get the 'in focus' indicator flashing green. This is immediatelty replaced with a continuous right poi...

Posted by johnha on 22/02/2012 - 23:10

ME-F Electronic focus indicator problem

Hi mate My MEF stopped working years ago, but here's what I would before deciding if its knackered. For your 1.7 lens make sure the switch is set to 2.8 Take out the batteries for a while just to reset the electronics and try again. Put new batteries in and if that don't work I would thi...

Posted by screwdriver222 on 23/02/2012 - 09:22

ME-F Electronic focus indicator problem

Given that even if the focus indicator is faulty you are still able to focus manually and that you have effectively turned it into an ME Super, it could still be a perfectly viable camera to use.

Posted by johnriley on 23/02/2012 - 09:59

ME-F Electronic focus indicator problem

screwdriver - yes I'll try some new batteries, tried your other suggestions. john - thanks, the metering appears to run consistently (haven't checked it's calibration) and as long as this is separate from the AF electronics, it should be OK. I look forward to shooting with it. I was interested...

Posted by johnha on 23/02/2012 - 23:47

ME-F Electronic focus indicator problem

Yes, the exposure circuit is separate from the AF :D The exposure electronics is, IIRC, exactly the same as the ME-Super. Do watch out for the ISO/Ev dial - that was a common cause of exposure issue. Internally it's a ceramic variable resistor, and any dust or dirt would make it misread - drast...

Posted by MattMatic on 24/02/2012 - 08:56

Lens release on K5

The lens release button had disappeared from my K5, so at the moment I am stuck using just my DA 16-45mm, which is on the camera. I am going on holiday tomorrow, to Morocco and then Sri lanka, so the timing is not very good! Anyone any ideas how I can release the lens so I can use more than the one ...

Posted by aliengrove on 23/02/2012 - 09:32

Lens release on K5

Thanks for the suggetions; I have found two solutions, an allen key and some rivets. The rivets are exactly the right size, but the allen key is now attached to my camera bag with a carbiner! Vey annoying, I will ahve to send the camera back to the UK when I get back from holiday.

Posted by aliengrove on 23/02/2012 - 15:37

Lens release on K5

Can anyone say what happens to make these buttons come off ? is it when changing lenses or just anytime ?. Anything to take more care with ? Regards. I think mine disppeared while changing lenses, though I am not sure. It just wasn't there when I wanted to change a lens. The logistics of getting...

Posted by aliengrove on 28/02/2012 - 17:14

Polariser and wide-angle lens

What would be the problem with a thin frame B&W polariser? The in built hood on the 15mm may not sit back far enough to allow the wider adapter flange for a Lee or Cokin type to fit properly. If it does fit, then so would a 49 > 77mm step up. Best regards

Posted by K10D on 24/02/2012 - 16:14

Polariser and wide-angle lens

I talked to Lee at Focus this week about vignetting on the 12-24mm pentax lens and DA15mm when using a polariser.I have been using a slim CP on the lens then the Lee holder and have been considering investing in the Lee CP. We did a test with the 12-24 and the Lee holder with Lee circular polariser...

Posted by phb on 09/03/2012 - 17:44

Polariser and wide-angle lens

Chris, I use the Lee system with the 31mm successfully. I can't remember which forum I saw this on. I use a UV and a spacer ring and CPL then add the Lee wide angle adaptor. This works fine even with 2 slots, no vignetting. SRB can supply the spacer rings to specific lengths or use empty filter ri...

Posted by phb on 10/03/2012 - 16:22

M lens focus barrel jamming

Hi All, Today my M 28/2.8 developed a clicking noise from the focus barrel at a particular point, this then got worse to the point where it is now jammed (I don't want to force it). It seemed to be fine yesterday. I've read a comment suggesting it might be a bearing, any help appreciated. J...

Posted by johnha on 25/02/2012 - 00:08

M lens focus barrel jamming

Might also be grit or a shard of something that's become lodged. Has the lens ever been bumped or dropped? Sounds like it needs to be taken apart for an internal clean and service. Time to call the pros.

Posted by Spaceman_Spiff on 25/02/2012 - 02:48

M lens focus barrel jamming

Strange.... I've got the same lens with the same problem? I just stopped using the lens too big a job stripping it down :shock:

Posted by Algernon on 25/02/2012 - 08:58

M lens focus barrel jamming

Actually, this lens is quite a simple design and relatively easy to strip , without disturbing the optics too much. Regards Steve

Posted by stevejcoe on 25/02/2012 - 10:03

K-5 Sudden Glitch Seeking Help & Advice

Hi all. I would like to ask the question if any K-5 owners have experienced a similar fault as described below? Turned on camera and pressed playback button to view photos I had taken the other day and started to browse using arrows keys when suddenly, several frames in the camera appears to ...

Posted by AlJones2402 on 26/02/2012 - 22:30

Dreaded Message - Memory Card Error (K10D)

Thought I'd post my (unfortunate) experiences with the K10D as a little warning :P Quite a while ago I bought a partially defective K10D that had an intermittent memory card error message. Having looked through the service manual I thought I'd give it a whirl and try and get a half decent dSLR fo...

Posted by MattMatic on 28/02/2012 - 14:37

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo