Search results for 'back focus' - page 1917

Use * as a wildcard for partial matches


sfxn flash questions

Hi, I know. Sometimes the manuals are not very helpful. The best thing to do is "play". Wait till you have finished the film and then try various settings and lighting conditions with no film. Get to know when it fires and when it doesn't. When you are happy you think you know what is happening, tr...

Posted by Kim C on 20/05/2005 - 11:55

sfxn flash questions

In response to my earlier post about fill flash on the sfxn, i now have the results of some trial shots which go some way to answering my questions. On a bright sunny day I took advantage of a passing model (my mum!) and positioned her so that the camera was facing into the sun. I was using my n...

Posted by Anonymous on 30/06/2005 - 00:59

Flash Choices iST DS

The AF360 has a dial/enter control which allows you to choose the mode. The flash has five modes: "P-TTL", "TTL", "A", "M", and "SB" (focus assist lamp only). The modes available depend on the body and the currently set camera mode. If you use an older 4pin extension cable you lose the autofocus b...

Posted by MattMatic on 03/06/2005 - 11:09

360FGZ flash test

Yes, the AF360 does have a test. There's a button on the back marked "Test" :D If you put the mode into "A" then pressing the test button will fire, and the "A" should blink if you've got a good exposure. (Check the manual - I haven't had a chance to look it up.) When using TTL or P-TTL the te...

Posted by MattMatic on 05/06/2005 - 20:14

*istD as wireless controller AND fill-flash?

Works a treat :D There's a custom setting "Flash in Wireless Mode" that controls whether the pop-up flash is used. The default is "On" - which means it will fill in for you. Set it to "Off" and the pop up is used merely to trigger the AF360. You can set the exposure compensation on the AF360, ...

Posted by MattMatic on 22/06/2005 - 10:26

AF 500 FTZ and Super A

There are two different forms of TTL command protocol for Pentax Cameras. The Manual focus bodies (LX, Super A) use an analogue comand protocol. The AF cameras use a digital protocol, but can also use the analogue protocol. Flashes designed for the manual bodies (without an F after the number) us...

Posted by amilner on 30/09/2005 - 18:37

*ist DL and Xtra Flash

Surely it's not possible for the Xtra flash to fire before the one attached to the camera - unless you're using the anti-redeye preflash! It must therefore be a synchronisation issue. There is a miniscule delay between the light leaving the camera's gun, being detected by the Xtra flash's sens...

Posted by Kimbo on 07/10/2005 - 17:51

Compatibility AF 500 FTZ and "old" SLR series "A"

you didn't mention if you used slide or print film. reason I mention it is print film can handle up to 4-5 stops over-exposure and still yeild a good print. check the negs with a loup and get back to us?

Posted by Anonymous on 31/10/2005 - 20:28

AF540FGZ - ANY UPDATE ON AVAILABILITY??

Hi again, I have called pentax and after the fourth person finally got the part number for this flash gun, which is 30425. The very helpful lady is also waiting for a press release which should contain the long awaited answers to everyones questions. Will post back when I get it. Anna

Posted by Anna on 10/11/2005 - 15:14

Thyristors and How They Work?

Hi Mac, The sensor doesn't measure ambient light but integrates the light bounced back when the flash goes off. Once sufficient light is reflected for the correct exposure, it switches the flash off. The closer you are, the greater the concentration of the "returned" light. If you double the distan...

Posted by Kim C on 12/11/2005 - 14:30

AF360FGZ max usable distance

Hi Terri1100. Here would be my advice for a school concert at 25m... raw capture. Manual focus. manual exposure. set your shutter speed to the slowest you can handhold, use the widest aperture that'll allow sufficient dof, (spot metering). (Ideally a fast normal to moderate telephoto.) playbac...

Posted by Don on 07/12/2005 - 12:38

Rookie Question re Vivitar 2500

Hi Mac, Will get back to you in a day or so but I think I may have the manual somewhere! I sem to rememder the yellow triangle is for use when using the wide angle adapter or similiar. Leave it with me and I will find out. Kim

Posted by Kim C on 26/11/2005 - 16:16

Tips for mooning and flashing people.

Another morning of waiting for a customers work to transmit on my stupid dial-up connection...country life does have at least one drawbwack...still better than driving to the city though... Anyways...the other thread got me thinking...about when not to flash... It amazes me to go to a concert ...

Posted by Don on 08/12/2005 - 14:54

Thyristor Flash with Slave(s)

Hi Mac. If your two lights are not aimed in such a way as to cause the light from your small light to hit the sensor on your vivitar, (ie- 45 degree angles on iether side of camera, ) then the vivitar will cut out at the fstop indicated on the scale. It will in fact read the light reflecting back t...

Posted by Don on 04/01/2006 - 04:01

AF400FTZ Power Shutdown

Maybe someone has some ideas. My AF400FTZ shuts down after a few minutes of inactivity, as stated in the manual. What does not happen, though, is when I press the shutter release on my PZ-1P, the flash does not power back up. I have missed numerous flash shots because of this. Any ideas why this...

Posted by Steven O'Shaughnessy on 06/01/2006 - 01:25

AF400FTZ Power Shutdown

There is something wrong with either the flashgun or the camera. The 400 definitely should switch itself back on. G

Posted by George Lazarette on 07/01/2006 - 03:32

af330ftz/istds/off camera?

My very first "Pro" studio set-up... I remember it well. 1 ceiling planter hook. 1 piece of white foamcore. tin foil. tape. I affixed the hook at a 90 dergree angle to the edge of my largest north facing window, exactly the same distance as my curtian rod. I'd unhook one end of my cu...

Posted by Don on 07/02/2006 - 20:06

Synchronisation lead.. err.. synchronisation.

Hi Niblue, I don't know if this is useful info for you, but I emailed Link Direct to see, if I bought another kit off them, whether they would work on the same frequency. This is so that I could use more than one receiver with the same transmitter, for multiple flashes. They mailed back, and th...

Posted by LiamD on 17/02/2006 - 20:01

Flash Autofocus assist

hello, i'm new to this flash business, and i'm not really here to discuss flashes, what i'm really interested in is a laser autofocus assist. Is there some kind of unit out there that will sit in tthe camera's hot shoe and simply shot a laser for the camera to focus on? i'm not looking for anything ...

Posted by Q on 16/02/2006 - 22:10

Flash Autofocus assist

And I thought af assist lights and preflashes were hard on the eyes.... pentax ftz 500 flash has a sb (spotbeam) setting that fire a red pattern for af to focus on, without firing flash...works in total dark and on solid colored objects. Ps I'd bet the local hardware store miht have a laser lev...

Posted by Don on 16/02/2006 - 22:15

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo