Snadalholme

Joined: 8th January 2007

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

Snadalholme
Re PEF vs DNG. I swapped tp PEF recently and only by chance found out that PEF is 8 bit, whereas DNG is 16 bit. The reason I believe this to be true is that I use PS Elements 4, using the Adobe RAW processor and quite a lot of the features of Elements 4 can't cope with 16 bit. It was only when I did a bit of cloning to remove some flare that I realised the file was 8 bit. Yes, I know from some experimentation that Silkypix produces more detailed images than Adobe RAW, but this is another learning curve that I'm not quite ready for and as I save all my digital negatives, I can always go back and re-process the really special shots. It may be that the Adobe RAW processor converts to 8 bit, but as it doesn't do this for DNG files, it's odd if it does it for PEFs.

Is this the reason why PEF files are smaller? I'm sure someone will correct me if I'm wrong!

Stuart

Comment by Snadalholme posted on RAW of PEF? at 13/08/2007 - 17:02

Snadalholme
Many thanks Matt

Comment by Snadalholme posted on SR with teleconverter at 31/05/2007 - 12:32

Snadalholme
I have just acquired a Tamron 2X converter to use with the Sigma 70 -300 lens. Do I set shake reduction on the K10D for the actual zoomed lens focal length in the normal way for a manual lens, eg 260mm or set it for the focal length of the lens + converter, in the above case 520mm? Logic says 520mm, but..........
You may say 'use a tripod', but that isn't always possible!

Comment by Snadalholme posted on SR with teleconverter at 31/05/2007 - 09:08

Snadalholme
Note the following in the Hoya statement:

Following the Management Integration, based on our common core technological
foundation in optics, imaging and materials, HOYA and PENTAX aim to optimize their business
portfolios, focusing on the life care, optics, information technology, eye care and imaging systems
areas. Expected stable revenues from the information technology and eye care areas will support
the life care area in achieving strategic growth. In addition, vertical integration in the optics field
will lead to qualitative structural reform and further strengthen competitiveness.

"imaging systems' presumably means cameras, but there is no mention of imaging systems being 'supported' by the IT and eye care areas.

This may mean nothing, but as someone who used to be involved in corporate reports I assume that the wording has been carefully chosen

So long as the Pentax brand continues to be developed, I'm not too fussed who owns whom. I am a little nervous though if Hoya are looking to sell off the camera side ann no-one wants to buy.

Stuart

Comment by Snadalholme posted on Hoya take over of Pentax goes ahead. at 31/05/2007 - 16:57

Snadalholme
To be successful - either as amateur, pro or semi-pro - in any creative art form I believe you need talent first, passion, then practice. Practice. Practice. Mozart was an exception, but have you seen the state of Beethoven's scores? So many crossings out and rethinks - it is painful to look at - but the results are sublime. Again, as with photography, the results, even for Beethoven, are not to everyone's taste.
Practice without talent and passion is tragic. The three together can lead anywhere. As for me, I am practising, I have a passion. Whether I have sufficient talent? My own jury is still out.
I must add one more thing: sufficient self-belief.

Comment by Snadalholme posted on PENTAX site Check it Out at 16/05/2007 - 19:30

Snadalholme
Thanks mongoose for the tips. It makes sense to dispense with the AF. I will - when I can allocate the time - experiment more and take careful note of the settings as I go. If I still get the problem of the camera refusing to fire ie shutter button locks I will return to the subject. Incidentally, the 2 shots at 80 and 93mm at 1sec at 4/4.5 (with a Sigma 70 -300 APO lens) picked up some stars as well as the moon and Venus (thanks for the confirmation).

Given that there would be some camera shake from pressing the shutter and that SR was probably hindering rather than helping, Venus was almost circular. Some CA but not bad for a poor method and an inexpensive lens.

Comment by Snadalholme posted on K10D long (ish) exposures at 23/04/2007 - 19:48

Snadalholme
Thanks for your replies. Interesting: I usually use aperture priority, but for the three shots I took (having raised the flash) the data is

Tv, f4.5, ISO400, 80mm, 1 sec
Tv, f8, ISO400, 300mm, 1 sec
Tv, f4, ISO400, 93mm, 1sec

So the camera was trying to find an aperture to suit the shutter speed - interesting shifts in aperture in relation to the focal length.

If my memory serves me correctly I gave up on Av because the little lozenge was flashing on any setting I tried, so I couldn't depress the shutter button, set a 1 sec to avoid shake (I have no remote release) but still had to raise the flash.

Will do more research. I brought it up because I had the same problem when shooting the eclipse but before I loaded 1.11 firmware.

Comment by Snadalholme posted on K10D long (ish) exposures at 22/04/2007 - 17:44

Snadalholme
Maybe this has already been dealt with, maybe it's in the manual, but the other day there was a gorgeous crescent moon, plus a planet (Venus?) in an almost black sky. One sec exposure said the K10D. No problem on the tripod, but at 6.7 aperture, the most the lens would go to, it refused to fire. had to activate the flash, then it worked fine. But surely I can take 1 sec (or slower) speeds without having to use the flash - which for this shot was pointless anyway. Is there a lower shutter speed beyond which the K10D insists on activating the flash? I got my shot - not very good because I forgot to deactivate the SR - but was left puzzled.

Comment by Snadalholme posted on K10D long (ish) exposures at 21/04/2007 - 19:39

Snadalholme
Re print size. I only have an A4 printer so can only say that, as you would expect, there are no problems here. Not having had the K10D very long and taking more shots than I can process so far I have little printing experience as yet from the K10D and have yet to find out for example how small a cropped shot will still print well at A4.

Comment by Snadalholme posted on K10 general purpose zoom choices. at 23/04/2007 - 08:43

Snadalholme
The Sigma 17 -70 2.8 lens is pretty good if you don't go all the way down to 17 at f2.8, as you get noticeable barrel distortion and some vignetting. The vignetting can of course soon be cropped out, but it depends how tight your shot was in the first place. The barrel distortion soon disappears above 17 and around f4. I find the range very useful and supplement it with the Sigma 70 -300 APO which is a lovely lens, good macro between 200 and 300 - when you can remember how to revert to normal mode, the fiddle here is very irritating. The 70 - 300 goes up to about 260/270 before getting quite soft.

I am sure there are much better lenses, but on a budget the Sigmas deliver the goods.

Comment by Snadalholme posted on K10 general purpose zoom choices. at 21/04/2007 - 21:19

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo