Pikaholic

Joined: 17th October 2011

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

Pikaholic
Thanks again Jak, Yes, I tried both settings but kept it on 'Lithium'. I also reduced the pixel count to 2 mg to see if that eased the situation but it didn't.

Kind regards, Bob

Comment by Pikaholic posted on K-r and Energizer lithium AA batteries at 10/07/2017 - 21:50

Pikaholic
Thanks Karlo, that deals with the battery voltage query nicely. I have just read another post which raised the difference between battery voltage under load and without load. I can test this but not sure how much resistance the camera places on the battery, therefore what resistor to use.

Thanks Jak, the D-L109 works fine but I like using AA's and keep the D-L109 as a back up

Bob

Comment by Pikaholic posted on K-r and Energizer lithium AA batteries at 10/07/2017 - 21:17

Pikaholic
I have just bought some Energizer batteries for the K-r as my Eneloops were giving less than 200 shots. When I put them in and switched on the info screen came up but when I depressed the shutter release the sign came up 'Batteries depleted'. Since then I have tried everything possible to find out why this is. This includes cleaning all the contacts, testing the batteries (6.75v in battery holder), setting the battery type to Lithium from Auto-detect and then trying them in my K100D. This was a bit better and the battery showed nearly empty but I was able fire the shutter before it turned red. Later I was able to fire off 6 shots before the same result. As this was an improvement I put the batteries back in the K-r, which showed half full. I could playback all the previous pictures and even took a 17 sec video but ended up with the battery depleted. I couldn't understand the erratic responses I was getting so in final desperation I tried another new set of batteries. As soon as I switched on the dreaded message 'battery depleted' appeared. I wondered if the high voltage of 6.7 was too much for the cameras to handle.

If anyone has had a similar experience or has any ideas which might help, I will be very pleased to hear from them. Thank you, Bob (Pikaholic)

Comment by Pikaholic posted on K-r and Energizer lithium AA batteries at 10/07/2017 - 20:32

Pikaholic
Thanks Chaps. Yes, the highlight correction was on and Yes, turning off has restored the lower ISO settings. I learn something every day.

I haven't found a setting for the Program Line limits. The K-r is more basic than the K7 and so does not appears to have this refinement. I am more than happy with what the K-r provides and probably wouldn't use this facility if it was available.

Thanks again to you both for your help.

Kind regards, Bob

Comment by Pikaholic posted on K-r firmware update at 10/04/2014 - 20:09

Pikaholic
My K-r has just come back from the Pentax Lab. and they kindly installed the latest firmware update (1.15) for me. I find now the normal ISO range is 400-12800 and the extended range is 200-25600. Does anyone know the reason for this change? It seems a backward step to me to clip the bottom setting and leave the top setting, which is not much use anyway. Is the camera as good now at 400 ISO as it was before at 200?

Comment by Pikaholic posted on K-r firmware update at 10/04/2014 - 16:53

Pikaholic
Thanks for the tip Peter, the camera is working fine now so I won't be trying to oil it at this stage. I will remember your advice if it jams up again in the future. I still have my Spotmatic 1000 that might need this treatment at some time.

Kind regards, Bob

Comment by Pikaholic posted on Problem with Pentax P30n at 26/11/2013 - 19:54

Pikaholic
Thanks Chaps for your continued interest and expert knowledge. My camera is in mint condition, including the mirror damper, so I shan't need to be tinkering with it.
Pentaxophile wrote:
Lack of foam light seals is one reason I always recommend the P30 and it's variants. It's also beautifully simple to use. Plus for some reason it's dirt cheap!
I had forgotten how beautifully made these cameras were and what a pleasure to use. Pentax certainly earned their reputation in those days, it's a shame they weren't able to stay in front of the pack, but that's another story.

Best wishes to you all,

Bob

Comment by Pikaholic posted on Problem with Pentax P30n at 31/10/2013 - 16:17

Pikaholic
Rejoice with me fellows, my P30n that was stuck is now working again. Thinking over your various comments and suggestions, I put the camera on a window cill in strong sun and allowed it to warm up for some time. Hey presto! the shutter released. I have been working through the shutter speeds and some were stuttering a bit but after lots of actions they seem to be working fine. They may not all be accurate now I shall use B&W film with a wide exposure latitude and see what happens.

Thank you all again for your interest and help. I am really pleased with the outcome. Bob

Comment by Pikaholic posted on Problem with Pentax P30n at 15/10/2013 - 18:01

Pikaholic
Thank you all for your helpful comments, I will try your suggestion Gamka, I think you are right. We were always advised to run through the shutter speeds to keep the action ticking over but it may be 20 years since this one saw the light of day. I was hoping there was a 'reset' button that would return it to factory setting but that was yet to come with the digital age. If I have any success I will add to this thread.

Thank you again and happy shooting, Bob.

Comment by Pikaholic posted on Problem with Pentax P30n at 15/10/2013 - 13:07

Pikaholic
Thanks Steven, I've tried your idea but no success. It has been idle for a long time so I don't know when it last worked. Thanks anyway.
Bob.

Comment by Pikaholic posted on Problem with Pentax P30n at 13/10/2013 - 17:21

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo