All Forum Comments
Comment by fatspider posted on K100D on sale in the UK now at 15/08/2006 - 00:24
I reckon aound £750-£850 without the Anti-Shake, and probably anything up to £1100-£1200 if it has it, assuming of course its the bee's knees and every bit as good as Canons IS
Suppose it would be too much to ask for a dual card slot as well, dont fancy the though of having to have two sets of cards!
Comment by fatspider posted on K100D on sale in the UK now at 14/08/2006 - 20:28
Mine are also jessops tubes, and with a little bit of paint off they work just fine, so I suppose part of my theory was correct, the different bodies have a different way of communicating with the lens, the tubes worked fine on my MZ5n cos the data was routed through different contacts.
Right no stopping me now, its macro only for the next two months!
Comment by fatspider posted on Extension tubes/faulty camera at 14/08/2006 - 20:06
BIG apologies, I got it sussed.
First off, a slight error in my first post, I re-checked my MZ7 and 5n, I didn't lose info on the 5n (its that long since I used it, but I was sure I lost it on that as well, must be getting senile).
It was actually the weblink from Daniel that got me on the right track, I got all my lenses out in front of me and compared the contacts then compared the contacts on the extension tubes. then I noticed an extra contact on the FAJ lens and a distinct shortage of contacts on my tamron macro.
My money is on the fact that the contacts on the KAF lenses can be used to convey different data to different camera bodies, the older bodies like my MZ5n are programed to read the lens contacts in one way whereas the later model bodies read the data differently. Although I might just be talking a load of bull.
I put this to the test, I tried every lens I have (not the FAJ) on my MZ5n, every lens gave me aperture info in the viewfinder when used with extension tubes, my 28-80 my 80-320 and my 28-200 sigma, and the tamron.
I tried this with my MZ7 and the istD, nothing.
Bottom line is when using an "A" series lens on the MZ5n you have to use the aperture ring in manual mode to change the aperture setting, I also tried the MZ5n in total TV and Manual modes the aperture info was still displayed, I think its safe to assume that modern cameras do read the lens contacts in different ways and that my extension tubes are just throwing a spanner in the works, probably all tied in with the multi-segment metering and this maximum aperture lark (read Daniels link) .
And my firmware is V1.12
Sorry Daniel looks like my tubes will be staying in Yorkshire, but I am definately going to have to do a set of controled exposures to see if I am getting correct metering.
Comment by fatspider posted on Extension tubes/faulty camera at 11/08/2006 - 22:01
Not sure about the firmware (have updated it once)
It is a KAF mount so no adaptor, there is an "A" setting/lock on the lens.
Comment by fatspider posted on Extension tubes/faulty camera at 11/08/2006 - 16:47
thanks for the input.
your right about the various contacts on the bodies/lenses sometime they dont even seem to match up.
The reason it took so long to try the tubes on my istD was a combination of several things, but primarilly after getting settled in a new house this was the first summer that I have had the chance to spend anytime in the garden, I tried a combination of KA tubes along with a cheap (Centon) ringflash, The beauty of digital at least is that I can check the exposure of the flash while making sure I have enough DOF, take a dozen shots and into the house to upload. I was so pleased with the results I visited a public garden to see just what species of plant we needed to introduce to attract the various little beasties! My familly think I'm mad wanting to attract more bees and wasps into the garden, actually they think I'm totally off my rocker anyway cos' I have this tendancy to try and stroke bumblebees.
Comment by fatspider posted on Extension tubes/faulty camera at 11/08/2006 - 00:42
Whenever I used extension tubes with my MZ7 or MZ5n and a Tamron macro lens I lost aperture data in the viewfinder, I seem to recal reading somewhere that this was due to reducing the effective maximum aperture of the lens, however when I recently tried this with my istD (yes its taken me two years to try it for macro work) I still lose the aperture info in the viewfinder and LCD but it is still recorded in the EXIF data, this got me to thinking that if the camera "knows" which aperture the lens is set at because of the info in the EXIF then why cant it display it in the viewfinder and LCD is this some strange annonally or is my camera faulty?
Comment by fatspider posted on Extension tubes/faulty camera at 10/08/2006 - 23:19
thanks for the warm welcome.
>>My first Pentax was an MZ-5N, bought as a backup body for my, er, Chinon CE5 (Nice little camera, did the job etc, good comeback to the perennial comment "you must have a really good camera" - "Well, it's a Chinon, Dixons own brand" - "Oh!"**)
Doesn't that really annoy you? you show people your best work and all they can say is....
"you must have a really good camera"
Er no missus, I got up and 3am and treked 10 miles in the freezing cold, then sat for another hour waiting for the sun to rise, I did this for seven days until the light was perfect....then I took out my Zenith E with a cheap Prinzflex lens and captured the shot! hehehehe
Just a quick hello to announce my arrival on this forum before I pop off to browse the topics and maybe add my two penneth to a few.
I have been a Pentax user for about....er, since just after the introduction of the MZ7, whats that about 6 years? or is it longer. I traded in my trusty old Olympus Om30 because I wanted a small light modern autofocus camera, and may I say what a pleasure the MZ7 was (still is occasionally) my only gripe was the lack of a DOF preview, I then purchased a used MZ5n as a second body and also because it offered me the much missed DOF preview, plus the retro styling and layout/operation of the camera made it a breeze to use.
A couple of years ago I made the leap and bought the istD, that was both the biggest mistake and the best thing I ever did, mistake because my film cameras spend most of the time at home, and for those of you who have already made the transition to digital then I dont need to say why it was the best thing.
Ooops! so much for the quick hello. time to get reading the posts.
Needless to say I haven't tried it.
Comment by fatspider posted on Anesthesia at 10/08/2006 - 22:12


My post was refering to the earlier replies regarding the new 10mp and whether or not that has the anti-shake system.
I cant see the point of upgrading an istd to the K100 if is only 6.1mp, if the new 10mp has the anti-shake then great, but if not I dont think I'll lose any sleep over it, after all Canon's IS didn't sway to to change brand.