BODYHEAT

Joined: 27th May 2009

All Forum Comments

Topics Created Topics Contributed Forum Comments Photo Comments

All Forum Comments

BODYHEAT
Anvh wrote:
Still f/2.8 and f/4 is one f-stop if that makes a difference indoors of shooting iso3200 or iso1600 then that is quite a difference in noise.
Good the sensor are getting better but a lower iso will always look better. Also the narrow DOF is important for some types of shooting as well.

The real faster F-numbers seems they are getting out of fashion, f/2.8 is good enough for almost every lighting I believe.

Ps. Typing this on my moms laptop and the keys are placed just a bit differently then with mine so had some typos
Stefan, let's assume sensors keep getting better and in a few years' time you'll have a sensor that yields the same noise and quality at ISO 3200 as your current one does at 100 for example, surely we are getting to a point where your lens speed will become far less important than it has been historically?

So my question is really this. Do we need to pay a premium for fast lenses if this feature will become less significant as all other aspects of DSLR design improve and supersede them?

Comment by BODYHEAT posted on Are 'fast' lenses less important with modern DSLRs? at 08/07/2009 - 12:04

BODYHEAT
Maybe, they'll just wait a bit longer and ship us K8s for our trouble

Comment by BODYHEAT posted on Any ideas on K7 UK deliveries? at 08/07/2009 - 11:52

BODYHEAT
johnriley wrote:
Like all things, you match the compromises to suit the situation.

If I can't use a tripod for a low light shot, then without hesitation I up the ISO. A sharp noisy picture would be better than an unsharp one IMHO.

I have an f1.4 lens, but the downside is that if you use it as such then you have very little DOF. So I tend to use the 16-45mm f4 anyway, and it does just fine.
Thanks John, but maybe I wasn't very clear. I was asking whether we are getting to a point with improvements in sensors etc where there will be no point paying a premium for a faster lens, assuming all other things being equal.

I understand the DOF field issue. But the 16-45mm f4 versus 16-50mm f2.8 is a case in point. There is a huge differential in price for two lenses which will both do the same job give or take 5mm focal length, but one is faster and much more expensive.

It was more of a general question and observation. Back in film days it used to really matter if you were using 64 ASA film for example. The extra speed could make all the difference between getting a nice shot or messing it up in certain lighting. Now I am not so sure...

Comment by BODYHEAT posted on Are 'fast' lenses less important with modern DSLRs? at 08/07/2009 - 11:33

BODYHEAT
Film had a fixed ISO/ASA and although you could push it, you were generally somewhat bound by this and so the faster the lens (hence more expensive) the better your chances of getting nice results.

With digital you can set the ISO a bit more arbitrarily so you can use a slower lens and get the same shot, at the expense of some noise perhaps.

However as sensors improve and get better and better at higher ISOs are we getting to a point where you don't need to spend the extra money on getting those fstop improvements in speed?

Assuming all other things are equal in terms of sharpness and resolution, will you need to spend twice as much on an f2.8 versus a f5.6 (for example, this is hypothetical) if you will be able to set a higher ISO and get just as good results with no noticeable worsening of noise?

Comment by BODYHEAT posted on Are 'fast' lenses less important with modern DSLRs? at 08/07/2009 - 10:54

BODYHEAT
johnriley wrote:
The screens are very soft and should not be touched. The mirror assembly can easily be knocked out of register and should also be left well alone.

This applies to all SLRs though, the LX included, so it's not the case that the DSLRs are more vulnerable in this respect.
I was just talking about general handling but I agree

Comment by BODYHEAT posted on Best way to clean dust off the K20d focussing screen? at 08/07/2009 - 10:47

BODYHEAT
Hardgravity wrote:
The screen scratches easily, as I found out when mine fell out into the mirror box earlier this year!

If you MUST clean it then treat it as you did the LX, but don't use Mr Sheen as Karl suggests, the dish washer maybe...
That's the point, the LX was built like a Sherman tank so I was less fearful. I am hoping the K7 will inherit some of that invincibility - that would be nice.

Comment by BODYHEAT posted on Best way to clean dust off the K20d focussing screen? at 08/07/2009 - 10:21

BODYHEAT
The LX focussing screen was easy to remove with the tweezers and it was built like a tank anyway, but I suspect the electronic K20d is a little bit more 'sensitive' which is why I asked.

I wouldn't touch the mirror as I wouldn't wish to disrupt the fine balance

Comment by BODYHEAT posted on Best way to clean dust off the K20d focussing screen? at 07/07/2009 - 20:09

BODYHEAT
The headline says it all. My sensor is spotless and I know we should never touch that with anything anyway, but there are a few little distracting specs on the focusing screen itself (or possibly the mirror). Obviously these don't affect photos, but are irritating. Any recommended methods to clean this?

Comment by BODYHEAT posted on Best way to clean dust off the K20d focussing screen? at 07/07/2009 - 19:17

BODYHEAT
As a newcomer to digital SLRs I am going through a learning curve because is some ways it is similar to film and in others not at all. In a very simplistic way one of the major differences is that film is about chemistry (physical things which need manipulation) whereas digital is about software (computer code). (hang in there, I'm leading up to something)

One question has been bugging me ever since I learned about the new HDR feature in the K7 in which it takes 3 bracketed shots (over, under, and well exposed) and digitally combines them into a single shot to increase the dynamic range. And the question is why?

This HDR feature sounds like an exciting development except for the limitation of moving objects (which would include leaves on trees blowing in the wind) or handheld shots due to camera shake. We are told that for this function to work it must be done on a tripod so the shots match up.

If digital raw files can basically capture all the data (read: code) from the image coming through the lens for you to select which parts you wish to enhance/suppress later in PP, why does the the K7 need to take three 'physical' shots at all to combine them? Why can't it take a single raw image and 'create' the HDR combination through software manipulation in camera, thus avoiding any potential camera shake and mismatching of images?

I needed to get it off my chest as it has been bugging me that surely this function could have been achieved by a clever software algorithm manipulating the raw data without the need to take three physical shots and risk camera shake.

Is this a dumb question or is there logic in my thinking?

Comment by BODYHEAT posted on K7 HDR hypothetical question at 04/07/2009 - 16:51

BODYHEAT
Unlocker wrote:
Spoke to Chris yesterday, he still does not know his buy in price for sure yet. It's why he's not listed a price yet.
Strange as people in the pentaxforums in USA and Canada are already taking delivery of their K7s in those markets in the last day or so

Comment by BODYHEAT posted on K-7 price dropping already? at 04/07/2009 - 08:46

Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo