Tethered Shooting !?
Posted 25/11/2009 - 13:00
Link
You have to run the software 'as administrator' and then you'll wonder why you wasted so much time on this.
Ken
“We must avoid however, snapping away, shooting quickly and without thought, overloading ourselves with unnecessary images that clutter our memory and diminish the clarity of the whole.” - Henri Cartier-Bresson -
“We must avoid however, snapping away, shooting quickly and without thought, overloading ourselves with unnecessary images that clutter our memory and diminish the clarity of the whole.” - Henri Cartier-Bresson -
Posted 25/11/2009 - 13:08
Link
I can confirm that My K20 does work on my XP sp3 PC with a couple of quirks (I can upload JPG or RAW, but not both). A tip I think Clarky suggested right click on the icon from which you start RA and select "Run as" then select Administrator.
Posted 25/11/2009 - 14:41
Link
Hi Pink
I got your message
It’s been a while since I setup a Pentax to do tethered shooting with Remote Assistant (PRA) so this is all going to be from memory based on the *istD and K10D.
The first thing I will mention and this took me ages to figure out, Pentax Remote Assistant does not like being plugged in to a USB hub, whether it is powered or unpowered, plug the camera directly in to your PC/Laptop. If you need more walking length get a 5m Active USB cable, these are readily available from eBay at around £5.
a: In the USB setup, set the camera to PC, not Pict-Bridge or PC-F.
b: Install PRA but don’t run it yet.
c: Connect the camera to the PC and switch it on, if your using Windows XP the Removable Disk window should open, close this window without picking an option. If the Removable Disk window does not open then there may be a problem with the communication between your PC and Camera (unless this has been turned off in the Windows settings).
d: Start PRA, it should recognize the camera, some setting will be green, some will be greyed out depending on the camera settings.
e: From the “File” drop down menu select “Auto Save Mode”.
f: From the “Tools/Options” menu browse to the folder you want to save the images in, uncheck the "use subfolder(s)" option, if you don't your files will go into a subfolder named "1", remote assistant will create this folder if the option is left checked. Shots taken with the remote assistant set to “Auto Save Mode” are not saved to the SD card (also shots taken with PRA are not recorded in the body total).
g: There is also a setting in one of the menus to enable camera controls i.e. you can change settings using either PRA only or both PRA and camera.
h: Fire up C1Pro, Bridge or Picasa and browse to the folder you selected in PRA ((I didn’t use basic C1 so I don’t know if it works, couldn’t get PRA to auto update folders with either Lightroom watched folder or Silkypix).
j: Off you go and hopefully have some fun.
Hope this helps
I got your message
It’s been a while since I setup a Pentax to do tethered shooting with Remote Assistant (PRA) so this is all going to be from memory based on the *istD and K10D.
The first thing I will mention and this took me ages to figure out, Pentax Remote Assistant does not like being plugged in to a USB hub, whether it is powered or unpowered, plug the camera directly in to your PC/Laptop. If you need more walking length get a 5m Active USB cable, these are readily available from eBay at around £5.
a: In the USB setup, set the camera to PC, not Pict-Bridge or PC-F.
b: Install PRA but don’t run it yet.
c: Connect the camera to the PC and switch it on, if your using Windows XP the Removable Disk window should open, close this window without picking an option. If the Removable Disk window does not open then there may be a problem with the communication between your PC and Camera (unless this has been turned off in the Windows settings).
d: Start PRA, it should recognize the camera, some setting will be green, some will be greyed out depending on the camera settings.
e: From the “File” drop down menu select “Auto Save Mode”.
f: From the “Tools/Options” menu browse to the folder you want to save the images in, uncheck the "use subfolder(s)" option, if you don't your files will go into a subfolder named "1", remote assistant will create this folder if the option is left checked. Shots taken with the remote assistant set to “Auto Save Mode” are not saved to the SD card (also shots taken with PRA are not recorded in the body total).
g: There is also a setting in one of the menus to enable camera controls i.e. you can change settings using either PRA only or both PRA and camera.
h: Fire up C1Pro, Bridge or Picasa and browse to the folder you selected in PRA ((I didn’t use basic C1 so I don’t know if it works, couldn’t get PRA to auto update folders with either Lightroom watched folder or Silkypix).
j: Off you go and hopefully have some fun.
Hope this helps
Cheers
Brian.
LBA is good for you, a Lens a day helps you work, rest and play.
Brian.
LBA is good for you, a Lens a day helps you work, rest and play.
Posted 25/11/2009 - 21:23
Link
thank you all and yes I have worked out that you need to right click silly me, I have down loaded bibble 5 but not getting what i want full screen auto image from the camera I can wait ages for the file to up load from pentax labs(should this be open ?) and then bibble will proses it as a thumb nail not what i want I would like first a full screen of my current shot and the previous shot to show as a thumb nail so i will now try Brian's method with bridge and with the help of my CS3 book will get there.??
wish me luck
James
wish me luck
James
My Fluidr
"To see in colour is a delight for the eye, But to see in black and white is a delight for the soul" ANDRI HERY
"To see in colour is a delight for the eye, But to see in black and white is a delight for the soul" ANDRI HERY
Posted 08/02/2010 - 20:10
Link
Feedback !
Been using the Pentax s/w for a while now and apart from a glitch while moving to Win7, it's been very good. So much so that I use it all the time for my studio work.
Indeed when I upgrade from K10 it will be to K20, and NOT beyond, as I would be lost without it
Been using the Pentax s/w for a while now and apart from a glitch while moving to Win7, it's been very good. So much so that I use it all the time for my studio work.
Indeed when I upgrade from K10 it will be to K20, and NOT beyond, as I would be lost without it
Stu - K10D | DFA 100/2.8 Macro | DA 55-300 | AF-360FGZ |
So much to learn... So little time !
Posted 08/02/2010 - 20:56
Link
how are you finding the speed? I haven't found a setting or cable combination which made it usable in any situation where I need to be able to fire quickly - children... and, well anyone under the age of 70 really
Add Comment
To leave a comment - Log in to Pentax User or create a new account.


1249 posts
17 years
Warwickshire
so if you have any good idea's then please post but I will not hold my breath
Thank you for the return in post's any time spent investigating this post
James
"To see in colour is a delight for the eye, But to see in black and white is a delight for the soul" ANDRI HERY