Tamrac Expedition 4x Backpack
Posted 19/05/2013 - 00:39
Link
duncanM wrote:
..I’ll try to get round to posting some photos..
Well, the sun did eventually come out of hiding and I took a couple of quick snaps, and here they are:..I’ll try to get round to posting some photos..


The shots above & below, plus the final one, show how deep the bag's side profile is, which means that even quite long lenses can be accommodated horizontally rather than perpendicularly.





In my opinion, the Tamrac Expedition backpacks are very hard to beat for design & build quality and fully justify their premium price & reputation
Posted 04/06/2013 - 10:58
Link
In answer to queries about the number of space dividers shown, I want to make clear that my bag is exactly as seen in the photos. I think originally there may have been more space divider inserts, but have changed bags a few times, haven't used this bag for quite a long time, and can't find any more of the dividers
Incidentally, in the course of searching, I found that I have no less than 3 remote controls include a "JJC RM-E7" infrared remote control that duplicates my oem Pentax one, so anyone who'd like it is welcome to it, for the cost of signed-for postage- £2 or so, I should think.
Incidentally, in the course of searching, I found that I have no less than 3 remote controls include a "JJC RM-E7" infrared remote control that duplicates my oem Pentax one, so anyone who'd like it is welcome to it, for the cost of signed-for postage- £2 or so, I should think.
Posted 11/06/2013 - 16:26
Link
Postage now at my cost, and further particulars added, copied from elsewhere:
The Expedition 4x offers foam-padded protection and quick access to an SLR, lenses, flash and accessories. The main compartment is completely foam padded with numerous adjustable, foam-padded dividers to protect a digital or film SLR, 4-6 lenses (including a 70-200mm zoom), and a flash. The camera with a zoom lens attached is suspended on two vertical, foam-padded dividers that are internally reinforced with rigid plastic. A restraint strap holds the lens firmly in place. Two Windowpane-Mesh pockets inside the front flap visibly organize filters, film and other accessories. A plastic, foam-padded platform in the bottom provides shock protection while a LockDown rain flap protects the zipper from the elements. Wing Accessory Pockets Dual "wing" pockets with water-resistant zippers organize and provide quick access to important accessories without disturbing your other gear. These "wing" pockets also feature Tamrac's U.S. patented Memory & Battery Management System that uses red flags to identify available memory cards and batteries from ones that are used up. QuickClip Tripod Attachment System A tripod is cradled (centered and balanced) securely between these pockets with Tamrac's QuickClip tripod attachment system while the lower, plastic-reinforced Tripod Foot Pocket holds two tripod legs secure. The Harness The state-of-the-art harness system with Dual-Density Comfort Pads provides maximum carrying comfort while Air Flow Channels help keep you cool and dry during extended use. The pack is also equipped with an adjustable waist belt and an expandable sternum strap for finer adjustments. The harness features "D" rings that accept Tamrac's optional backpack camera strap (Model N-11). M.A.S. and S.A.S. Compatible Strap Accessory System (S.A.S.) and Modular Accessory System (M.A.S.) attachment slots on the pack provide a convenient place to carry Tamrac's optional M.A.S. and S.A.S. products. Four SpiderTabs provide additional attachment points for expedition equipment or extra clothing.
Internal Dimensions: 10" W x 5" D x 11" H 25 x 13 x 28 cm
External Dimensions: 12" W x 9" D x 14" H 31 x 24 x 36 cm
Weight: 3 lbs 14 oz. (1764g)
The Expedition 4x offers foam-padded protection and quick access to an SLR, lenses, flash and accessories. The main compartment is completely foam padded with numerous adjustable, foam-padded dividers to protect a digital or film SLR, 4-6 lenses (including a 70-200mm zoom), and a flash. The camera with a zoom lens attached is suspended on two vertical, foam-padded dividers that are internally reinforced with rigid plastic. A restraint strap holds the lens firmly in place. Two Windowpane-Mesh pockets inside the front flap visibly organize filters, film and other accessories. A plastic, foam-padded platform in the bottom provides shock protection while a LockDown rain flap protects the zipper from the elements. Wing Accessory Pockets Dual "wing" pockets with water-resistant zippers organize and provide quick access to important accessories without disturbing your other gear. These "wing" pockets also feature Tamrac's U.S. patented Memory & Battery Management System that uses red flags to identify available memory cards and batteries from ones that are used up. QuickClip Tripod Attachment System A tripod is cradled (centered and balanced) securely between these pockets with Tamrac's QuickClip tripod attachment system while the lower, plastic-reinforced Tripod Foot Pocket holds two tripod legs secure. The Harness The state-of-the-art harness system with Dual-Density Comfort Pads provides maximum carrying comfort while Air Flow Channels help keep you cool and dry during extended use. The pack is also equipped with an adjustable waist belt and an expandable sternum strap for finer adjustments. The harness features "D" rings that accept Tamrac's optional backpack camera strap (Model N-11). M.A.S. and S.A.S. Compatible Strap Accessory System (S.A.S.) and Modular Accessory System (M.A.S.) attachment slots on the pack provide a convenient place to carry Tamrac's optional M.A.S. and S.A.S. products. Four SpiderTabs provide additional attachment points for expedition equipment or extra clothing.
Internal Dimensions: 10" W x 5" D x 11" H 25 x 13 x 28 cm
External Dimensions: 12" W x 9" D x 14" H 31 x 24 x 36 cm
Weight: 3 lbs 14 oz. (1764g)
Posted 23/06/2013 - 12:37
Link
Is this still available please?
Posted 23/06/2013 - 13:20
Link
Papa_Lazarou wrote:
Is this still available please?
Yes- I have just sent you a p.m.
Is this still available please?
Posted 23/06/2013 - 20:34
Link
Payment sent.
Thanks
Phil
Thanks
Phil
Posted 23/06/2013 - 20:41
Link
Papa_Lazarou wrote:
Payment sent.
Thanks
Phil
Phil, recently you are full load of money for lenses and now a bag
Payment sent.
Thanks
Phil
Posted 23/06/2013 - 20:49
Link
LOL, yeah all done now.
Posted 23/06/2013 - 23:54
Link
Papa_Lazarou wrote:
Payment sent.
Thanks
Phil
Many thanks Phil. I'll get the bag off to you ASAP.
Payment sent.
Thanks
Phil
Add Comment
To leave a comment - Log in to Pentax User or create a new account.


374 posts
17 years
South of Scotland
I am, regrettably, undertaking less arduous walks, as my knees are beginning to give me trouble, and my ThinkTank Retrospective has taken over from the Tamrac, to the point where it might as well be passed on to someone who might make more use of it.
It is not much more than a year old, has had very little use, and is in close to original condition.
For anyone who does not know the Tamrac range, check it out by googling Tamrac 5584 or at the Tamrac website- http://www.tamrac.com/5584.htm
Its main compartment is 250x130x280 internally, and comfortably takes my K5 with 16-50 attached, plus my 50-135 and 12-24, and flashgun. The compartment also has 2 so-called windowpane-mesh pockets inside the front flap for accessories such as filters, memory cards, or batteries. This flap zips shut, with a rain flap over the zip, and on its front (outer) side there is a foam-padded pocket, with water resistant zip, that is big enough for a small netbook (my little Samsung NC10 just squeezes in) or actual books etc.
On the front of the padded pocket, there are straps for a tripod, 2 more small side pockets/pouches, again for memory cards, batteries, etc, and a small central pocket/pouch also meant to take the bottom of the tripod legs.
Underneath the backpack there is a plastic foam-padded shock resistant base for putting it on the ground.
I’ll try to get round to posting some photos when(if) a bit more light appears in the sky!
If anyone is interested, I am asking £50, plus £5 towards p&p so long as your address is within the couriers’ area (which apparently covers most of the UK apart from some very remote areas)