Specks in viewfinder
Posted 21/01/2013 - 17:48
Link
Just use a blower, cautiously, such as the Rocket blower. The mirror and screen should not be wiped as they are very fragile components. They are best not touched at all.
Best regards, John
Posted 21/01/2013 - 18:04
Link
I fear it may be the use of the Rocket blower (to remove dust from the sensor) that got me into this position! Isn't the danger that the blower relocates the dust within the camera body, or injects fresh dust into the camera (the air isn't filtered)?
Do you reckon the specks will be on the mirror or screen? They can't get behind the screen?
Is it worth investing in an Arctic Butterfly or is it just hype?
Do you reckon the specks will be on the mirror or screen? They can't get behind the screen?
Is it worth investing in an Arctic Butterfly or is it just hype?
Posted 21/01/2013 - 18:42
Link
I would leave well alone. Annoying though it may be, specks on the mirror or screen won't affect the image. It happened with film cameras too. It's possible the specks may move again anyway, but I'd just avoid messing unless it becomes essential.
Hope that helps!
Hope that helps!
Best regards, John
Posted 21/01/2013 - 18:55
Link
An arctic butterfly is unlikely to help you.
If it is the mirror these are very easy to clean with a sensor swab and cleaning fluid - you just need to be careful and do not apply pressure otherwise you may move it out of alignment.
It is entirely possible that the dust is behind the focus screen and that it has got there by using a rocket blower. I have had this happen several times and at the moment both my Kr and K5 have this problem.
As John said - do not touch the focus screen - this usually ends in disaster however - you can carefully remove the focus screen with a pair of shielded tweezers and carefully use the rocket blower in the chamber. This is what I do when the build up becomes annoying. You just have to be very careful and ensure you do not touch the sides inside the chamber which are very easy to mark.
Carl
If it is the mirror these are very easy to clean with a sensor swab and cleaning fluid - you just need to be careful and do not apply pressure otherwise you may move it out of alignment.
It is entirely possible that the dust is behind the focus screen and that it has got there by using a rocket blower. I have had this happen several times and at the moment both my Kr and K5 have this problem.
As John said - do not touch the focus screen - this usually ends in disaster however - you can carefully remove the focus screen with a pair of shielded tweezers and carefully use the rocket blower in the chamber. This is what I do when the build up becomes annoying. You just have to be very careful and ensure you do not touch the sides inside the chamber which are very easy to mark.
Carl
No matter how many lenses I have owned - I have always needed just one more
Posted 21/01/2013 - 19:28
Link
Can the specks on the mirror/focus screen affect the operation of the autofocus?
What horrible devices DSLRs with exchangeable lenses are! Would a glass window to protect and seal the internals affect the optical performance that much? After all, a lot of people attach a bit of extra glass to protect the front of their lenses.
What horrible devices DSLRs with exchangeable lenses are! Would a glass window to protect and seal the internals affect the optical performance that much? After all, a lot of people attach a bit of extra glass to protect the front of their lenses.
Posted 21/01/2013 - 19:49
Link
The 'problem' you have is purely cosmetic - it will not impact AF, IQ or anything else.
It really is normal and not a problem. If (like me) you change lenses on the fly - expect it.
Carl
It really is normal and not a problem. If (like me) you change lenses on the fly - expect it.
Carl
No matter how many lenses I have owned - I have always needed just one more
Posted 21/01/2013 - 20:08
Link
WaypointCharlie wrote:
Can the specks on the mirror/focus screen affect the operation of the autofocus?
What horrible devices DSLRs with exchangeable lenses are! Would a glass window to protect and seal the internals affect the optical performance that much? After all, a lot of people attach a bit of extra glass to protect the front of their lenses.
It's not just DSLRs that get dust inside them. I've a Ricoh R7 compact which has muck on the sensor. I'm convinced dust gets drawn in through the action of the lens opening and closing.Can the specks on the mirror/focus screen affect the operation of the autofocus?
What horrible devices DSLRs with exchangeable lenses are! Would a glass window to protect and seal the internals affect the optical performance that much? After all, a lot of people attach a bit of extra glass to protect the front of their lenses.
I only ever change lenses inside the house after carefully cleaning the outside of the camera around the lens throat and the inside element of the lens to go on the camera. The lens I fit stays on all day. And I still get dirt on the sensor! There's also lots of odd specks inside the (supposedly) sealed viewfinder of my K10...
Best wishes,
Andrew
"These places mean something and it's the job of a photographer to figure-out what the hell it is."
Robert Adams
"The camera doesn't make a bit of difference. All of them can record what you are seeing. But, you have to SEE."
Ernst Hass
My website: http://www.ephotozine.com/user/bwlchmawr-199050
http://s927.photobucket.com/home/ADC3440/index
https://www.flickr.com/photos/78898196@N05
Andrew
"These places mean something and it's the job of a photographer to figure-out what the hell it is."
Robert Adams
"The camera doesn't make a bit of difference. All of them can record what you are seeing. But, you have to SEE."
Ernst Hass
My website: http://www.ephotozine.com/user/bwlchmawr-199050
http://s927.photobucket.com/home/ADC3440/index
https://www.flickr.com/photos/78898196@N05
Posted 23/01/2013 - 08:36
Link
If the dust is on the mirror then it's on the path to the phase detect AF sensor. So does it have to be severe to have any detrimental effect on AF? Of course, you could also have dust on the secondary mirror or AF sensor itself and never be aware of it.
Posted 23/01/2013 - 09:18
Link
When using a Rocket Blower (or similar) I always give several hard blasts first into the air to dislodge any internal dust
When I'm sure it's clean, then I use it on the camera.
(And have often used fairly gentle blows onto the focus screen to dislodge annoying dust particles)
Matt
When I'm sure it's clean, then I use it on the camera.
(And have often used fairly gentle blows onto the focus screen to dislodge annoying dust particles)
Matt
http://www.mattmatic.co.uk
(For gallery, tips and links)
(For gallery, tips and links)
Posted 24/01/2013 - 00:12
Link
I have cleaned the screen on my K10. The K5 hasn't needed it yet.
If you remove the screen from the camera carefully, with tweezers only holding onto the handling tab, then use the blower. Replace the screen into the camera straight away, before it gets dust on again. This way you get the bits off both sides of the screen and don't move the dust around in the camera.
If you google 'changing Pentax focusing screen,' you will find instructions and videos showing the procedure.
If you remove the screen from the camera carefully, with tweezers only holding onto the handling tab, then use the blower. Replace the screen into the camera straight away, before it gets dust on again. This way you get the bits off both sides of the screen and don't move the dust around in the camera.
If you google 'changing Pentax focusing screen,' you will find instructions and videos showing the procedure.
Bob
Add Comment
To leave a comment - Log in to Pentax User or create a new account.


201 posts
14 years
Cambridge
Are the specks likely to be on the mirror or the focusing screen? How should I set about cleaning them?
At the moment I can put up with them. However, I assume they could upset the autofocus if they appear at the focus point. Is this correct?
(Sorry if this question has been addressed many times before. I did a quick search and couldn't find anything about cleaning the viewfinder, just the sensor.)