SMC FA28-80mm lense part needed

pauldavid
Posted 06/09/2010 - 19:23 Link
Hi- have just operated the PA-AS switch on the front of the lense wich then fell off, one of the small plastic lugs that hold it on has brocken off, does any one know if i can obtain a new one for it, Thanks.
Dangermouse
Posted 07/09/2010 - 00:00 - Helpful Comment Link
Sadly that's quite a common problem with the Power Zoom lenses.

Your best bet (assuming you caught all the bits) is to put a tiny dab of superglue on each end of the cover plate (where the clips were), reassemble it, and hold it for a few minutes until the glue takes. Make sure that the switch still works and that you've included the little copper contact in the push button, it may be a good idea to have a dry run first to check this.
Matt

Shooting the Welsh Wilderness with K-m, KX, MX, ME Super and assorted lenses.
Mannesty
Posted 07/09/2010 - 09:41 - Helpful Comment Link
I have one that has suffered the same problem. It does seem to be common.
Peter E Smith - flickr Photostream
Dangermouse
Posted 07/09/2010 - 10:45 - Helpful Comment Link
I was lucky enough to find a trashed lens with all the switch parts, and an otherwise mint lens minus the switch. Combined the two and it takes decent photos, although I don't have any way of testing the PZ functions.
Matt

Shooting the Welsh Wilderness with K-m, KX, MX, ME Super and assorted lenses.
pauldavid
Posted 11/09/2010 - 12:53 Link
Thanks for the info, I have all the bits and will try to repair with super glue, thanks for all your help.would be helpful if these were available as a spare part
Edited by pauldavid: 11/09/2010 - 12:56
Dangermouse
Posted 11/09/2010 - 14:26 - Helpful Comment Link
Your best bet is to keep an eye on ebay for a cheap example with intact switch. It's also worth watching auctions of Z or PZ series cameras as the PZ 28-80mm was a kit lens for some of these.
Matt

Shooting the Welsh Wilderness with K-m, KX, MX, ME Super and assorted lenses.
dougf8
Posted 11/09/2010 - 14:48 Link
Got surplus lens that I guess was dropped as the thread is cracked in, seems to function fine. The PA AS switch is fine, powerzoom works on the K-7 .

[IMG]http://i740.photobucket.com/albums/xx49/df8/IMGP3811.jpg[/IMG]

PM me your offer

(hint: I don't expect much )

You can have the surplus broken Z-1 it came off too if you want.......
Lurking is shirking.!
Edited by dougf8: 11/09/2010 - 14:51

Add Comment

To leave a comment - Log in to Pentax User or create a new account.



Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo