Picture frames...
Add Comment
To leave a comment - Log in to Pentax User or create a new account.
Photograph titled 'Early frost' by HarmanNielsen selected as Pentax User's Photo of the Week.
Photograph titled 'Kingfisher' by JudgeTed selected as Pentax User's Photo of the Week.
Proudly supporting Pentax User |
||
![]() |
![]() |
|
931 posts
20 years
Bracknell Berkshire
I wrote this tutorial for the design class on another site.. thought it may interest someone. I'd have linked to it directly, but it's not a public forum. Although this is an explanation of the process in GIMP, it should transfer to PS easily enough.
===============================================
This tutorial is intended to show you how to create a frame for your picture before placing it on a web page.
Application: GIMP
Level: Lower Intermediate
First, open a new layer measuring (approx) 285 x 220 pixels @ 72dpi. Make the background transparent. Now click on File | Open as Layer and locate the picture you’d like to frame.
Select the picture, and then click Open. You may need to scale the picture to the intended size of your finished image. To do this, click on Layer | Scale Layer and increase/reduce the size of the picture until it is just slightly smaller than the area you have chosen for the background., and click the Scale button. ( This may be behind your work area now) You can of course play around with the scale tool to get the most pleasing view of the picture.
Next, create a new transparent layer. We’re going to fill this with the surface finish of the frame. For this tutorial we’re going to go for a brushed aluminium effect. Fill the background with a pale grey colour. Then go to Filters | Noise | Scatter HSV and choose the following values.
Next, apply gaussian blur. Go to Filters | Blur | Gaussian Blur and choose the following values.
To do this you may need to break the link between horizontal and vertical by clicking the chain link.
Next click Select | All, then Select | Shrink and shrink by 20 pixels. Next we need to give the illusion of depth to the frame. Shrink again, this time by 1 pixel, and use the Fill tool to fill the area with black. Next, shrink by 2 pixels and using the Blend Tool set to linear, fill the inner area in diagonally, from top left to bottom right using a dark and light grey. Next shrink by 1 pixel again and fill in in black. Now right click in the middle of the frame and choose Edit | Cut.
That’s it. You now have a framed picture to put on your site. You can of course use any colour style of frame that you like, but this shows you the uses of a couple of tools you may not have used before.
===============================================
Cheers
Liam
"Make your hands respond to what your mind demands." Jesse James
Best wide-angle lens? Two steps backward. Look for the 'ah-ha'. Ernst Haas