pentax honeywell spotmatic problems
Posted 04/04/2004 - 17:12
Link
The Pentax USA site has a section where you can download a pdf copy of manual for every product thet ever sold in the USA.
Cheers,
Bob
Cheers,
Bob
Posted 04/04/2004 - 23:00
Link
If the negs are completely blank, the most likely reason is that the film didn't wind on properly as you took each shot.
The only other possibilities are that the shutter didn't fire, or that the mirror didn't rise.
Check for the first by making sure that the rewind knob goes round when you wind on after taking a shot.
Check for the second by opening the back of the camera, and firing the shutter at different speeds. Look at the shutter curtain, and when you trip the shutter you should see a flash of light through the lens.
Finally check that the mirror rises when you trip the shutter. Take the lensa off and watch it. You'll hear it, too.
If it's not one of those three, blame the lab.
George
The only other possibilities are that the shutter didn't fire, or that the mirror didn't rise.
Check for the first by making sure that the rewind knob goes round when you wind on after taking a shot.
Check for the second by opening the back of the camera, and firing the shutter at different speeds. Look at the shutter curtain, and when you trip the shutter you should see a flash of light through the lens.
Finally check that the mirror rises when you trip the shutter. Take the lensa off and watch it. You'll hear it, too.
If it's not one of those three, blame the lab.
George
Add Comment
To leave a comment - Log in to Pentax User or create a new account.


2277 posts
24 years
thanks,
cat