Metering with 1.7X converter
Posted 14/07/2007 - 17:45
Link
Quote:
I have also noticed that in AV mode I can set the F to F2.8 but the lens is only a F4 if I take a shot at F2.8 the shots come out over exposed.
Has anyone else had the same problems and has anyone any ideas why this could be happening?
I've had the same issue using a Pentax SMC-A 400mm lens with a Jessops branded 2x AF teleconverter.
I have also noticed that in AV mode I can set the F to F2.8 but the lens is only a F4 if I take a shot at F2.8 the shots come out over exposed.
Has anyone else had the same problems and has anyone any ideas why this could be happening?
Posted 14/07/2007 - 17:48
Link
Quote:
I am having problems with the metering on my K10D with a Sigma 100-300 EX F4 lens and Pentax 1.7X converter.
I have taken some test shots and found the following:-
With the camera set to AV and lens in A position at F4 the camera meters at 1/80th second.
With the camera set to M and lens at F4 using the ring the camera meters at 1/320th second.
Both shots were correctly exposed.
I have also noticed that in AV mode I can set the F to F2.8 but the lens is only a F4 if I take a shot at F2.8 the shots come out over exposed.
Has anyone else had the same problems and has anyone any ideas why this could be happening?
I don't understand your last paragraph. Please recompose. Earlier, you mention using "the ring". Don't. The K10D works best when the aperture is set from the body, with the aperture ring set to A.I am having problems with the metering on my K10D with a Sigma 100-300 EX F4 lens and Pentax 1.7X converter.
I have taken some test shots and found the following:-
With the camera set to AV and lens in A position at F4 the camera meters at 1/80th second.
With the camera set to M and lens at F4 using the ring the camera meters at 1/320th second.
Both shots were correctly exposed.
I have also noticed that in AV mode I can set the F to F2.8 but the lens is only a F4 if I take a shot at F2.8 the shots come out over exposed.
Has anyone else had the same problems and has anyone any ideas why this could be happening?
G
Keywords: Charming, polite, and generally agreeable.
Posted 14/07/2007 - 18:02
Link
Sorry it is a bit difficult to explain.
What I meant was when I use Aperture Priority mode I can set the aperture to 2.8 on the camera but the lens is only a F4 lens.
I was only using the ring on the lens to prove a point why do I get two different meter readings for F4 surely they should be the same.
What I meant was when I use Aperture Priority mode I can set the aperture to 2.8 on the camera but the lens is only a F4 lens.
I was only using the ring on the lens to prove a point why do I get two different meter readings for F4 surely they should be the same.
Posted 14/07/2007 - 18:42
Link
Quote:
Sorry it is a bit difficult to explain.
What I meant was when I use Aperture Priority mode I can set the aperture to 2.8 on the camera but the lens is only a F4 lens.
I was only using the ring on the lens to prove a point why do I get two different meter readings for F4 surely they should be the same.
You should not be able to set f2.8 on the camera when you have a max aperture on the lens of f4.Sorry it is a bit difficult to explain.
What I meant was when I use Aperture Priority mode I can set the aperture to 2.8 on the camera but the lens is only a F4 lens.
I was only using the ring on the lens to prove a point why do I get two different meter readings for F4 surely they should be the same.
I suspect that either you have a fault somewhere, or dirty contacts. Try cleaning all the lens-mount contacts on each item. This can often be a cause of exposure errors.
G
Keywords: Charming, polite, and generally agreeable.
Posted 14/07/2007 - 19:14
Link
Quote:
Did you find a solution?
mille19 wrote:
I have also noticed that in AV mode I can set the F to F2.8 but the lens is only a F4 if I take a shot at F2.8 the shots come out over exposed.
Has anyone else had the same problems and has anyone any ideas why this could be happening?
I've had the same issue using a Pentax SMC-A 400mm lens with a Jessops branded 2x AF teleconverter.I have also noticed that in AV mode I can set the F to F2.8 but the lens is only a F4 if I take a shot at F2.8 the shots come out over exposed.
Has anyone else had the same problems and has anyone any ideas why this could be happening?
Posted 14/07/2007 - 19:19
Link
Quote:
Clean your contacts!ChrisA wrote:
Did you find a solution?Quote:
I have also noticed that in AV mode I can set the F to F2.8 but the lens is only a F4 if I take a shot at F2.8 the shots come out over exposed.
Has anyone else had the same problems and has anyone any ideas why this could be happening?
I've had the same issue using a Pentax SMC-A 400mm lens with a Jessops branded 2x AF teleconverter.I have also noticed that in AV mode I can set the F to F2.8 but the lens is only a F4 if I take a shot at F2.8 the shots come out over exposed.
Has anyone else had the same problems and has anyone any ideas why this could be happening?
G
Keywords: Charming, polite, and generally agreeable.
Posted 14/07/2007 - 19:40
Link
Does the teleconverter have all the relevant contacts?
Posted 14/07/2007 - 19:53
Link
Quote:
Does the teleconverter have all the relevant contacts?
It has all the contacts that a Ka lens has, as I understand it.Does the teleconverter have all the relevant contacts?
I have just put an FA zoom on my K10D, with the 1.7 TC and everything works perfectly. The zoom has a widest aperture of 1:4, and the body would not open wider than 1:8. With a 1:1.8 lens, the widest allowed aperture was 1:2.8. Note that this represents the combined aperture of the lens and the TC.
G
Keywords: Charming, polite, and generally agreeable.
Posted 14/07/2007 - 20:06
Link
In fact, as an F lens,the TC should have all the contacts that a Kaf lens does.
G
G
Keywords: Charming, polite, and generally agreeable.
Posted 14/07/2007 - 22:00
Link
Ok, 'twas just a thought.
Posted 14/07/2007 - 22:23
Link
Quote:
Ok, 'twas just a thought.
If it weren't for thoughts, we'd still be in caves.Ok, 'twas just a thought.
G
Keywords: Charming, polite, and generally agreeable.
Posted 14/07/2007 - 22:37
Link
ROFL
Posted 15/07/2007 - 01:40
Link
Quote:
No.ChrisA wrote:
Did you find a solution?Quote:
I have also noticed that in AV mode I can set the F to F2.8 but the lens is only a F4 if I take a shot at F2.8 the shots come out over exposed.
Has anyone else had the same problems and has anyone any ideas why this could be happening?
I've had the same issue using a Pentax SMC-A 400mm lens with a Jessops branded 2x AF teleconverter.I have also noticed that in AV mode I can set the F to F2.8 but the lens is only a F4 if I take a shot at F2.8 the shots come out over exposed.
Has anyone else had the same problems and has anyone any ideas why this could be happening?
What do you think I should do George? I thought I might try cleaning the contacts.
Posted 15/07/2007 - 12:58
Link
Quote:
What do you think I should do George? I thought I might try cleaning the contacts.
Now there is a novel idea! But does the Jessops TC have contacts?mille19 wrote:
No.Quote:
Did you find a solution?mille19 wrote:
I have also noticed that in AV mode I can set the F to F2.8 but the lens is only a F4 if I take a shot at F2.8 the shots come out over exposed.
Has anyone else had the same problems and has anyone any ideas why this could be happening?
I've had the same issue using a Pentax SMC-A 400mm lens with a Jessops branded 2x AF teleconverter.I have also noticed that in AV mode I can set the F to F2.8 but the lens is only a F4 if I take a shot at F2.8 the shots come out over exposed.
Has anyone else had the same problems and has anyone any ideas why this could be happening?
What do you think I should do George? I thought I might try cleaning the contacts.
G
Keywords: Charming, polite, and generally agreeable.
Add Comment
To leave a comment - Log in to Pentax User or create a new account.


799 posts
20 years
I have taken some test shots and found the following:-
With the camera set to AV and lens in A position at F4 the camera meters at 1/80th second.
With the camera set to M and lens at F4 using the ring the camera meters at 1/320th second.
Both shots were correctly exposed.
I have also noticed that in AV mode I can set the F to F2.8 but the lens is only a F4 if I take a shot at F2.8 the shots come out over exposed.
Has anyone else had the same problems and has anyone any ideas why this could be happening?