Meet The Shopkins
Posted 25/03/2016 - 20:20
Link
Cracking shots, and a very nicely detailed how to as well. We'll lit and punchy colourful set.
That lens and extension tube set up is working really well for you.
Does your trigger control the other 2 flash outputs or do you set them independently?
That lens and extension tube set up is working really well for you.
Does your trigger control the other 2 flash outputs or do you set them independently?
I know what i like, If not always why.
Posted 25/03/2016 - 21:15
Link
Hello Derek, and thanks
The flash technologies make an interesting discussion point .... The V6 transceiver (in 'transmitter' mode on the camera) controls the power and flash head zoom of the Cactus RF60 (which has its own built-in 'receiver'). I cannot control the Pentax flash from the camera in manual mode, because I only have one V6 ..... if I had another I could place it on the bottom of the Af-540FGZ in 'receiver' mode, and the V6 has a Pentax Profile to enable it to manually control the flash power remotely from the on-camera V6.
So for this particular set up I had the convenience of adjusting the RF60 without moving, but had to go over to the Pentax flash to control it directly.
I usually don' have this issue, as in fact I often mix the manual Cactus flash with P-TTL Pentax automatic flash .... and P-TTL allows Flash Compensation from the camera flash modes display which controls the output of the P-TTL slaves .... very convenient.
.....Now, THIS is where it gets interesting ...... (as if it wasn't already!! ) ..... with this set-up here, I was NOT able to use P-TTL wireless control for my Pentax flash, and I was forced to use Manual flash power plus 'Dumb Slave' (SL2) optical triggering. The reason is that P-TTL requires an aperture coupled lens (in order for the aperture information to be used by the automatic metering system).
With an aperture coupled lens I can use an on-camera flash in P-TTL Wireless 'Controller' mode .... this sends the mode and power information to a P-TTL slave in 'SL1' mode. But with no aperture coupling then this P-TTL controller will not work. So, in Manual flash mode on the AF-540FGZ, I set 'SL2' slave mode .... this then responds to the first flash that it senses and fires at the same time ..... in this case it was triggered optically by the flash from the RF60 ... and it all comes together!
I must admit to feeling that this is all a really rather extraordinary combination and collaboration of technologies ..... a modern DSLR, a 1970s manual aperture lens, tubes with no contacts, a radio remote controlled flash system, plus a modern TTL flash that can function also as a 'dumb slave' ... all working together and producing images with complete control over every aspect !! .... Well, I'M amazed
The flash technologies make an interesting discussion point .... The V6 transceiver (in 'transmitter' mode on the camera) controls the power and flash head zoom of the Cactus RF60 (which has its own built-in 'receiver'). I cannot control the Pentax flash from the camera in manual mode, because I only have one V6 ..... if I had another I could place it on the bottom of the Af-540FGZ in 'receiver' mode, and the V6 has a Pentax Profile to enable it to manually control the flash power remotely from the on-camera V6.
So for this particular set up I had the convenience of adjusting the RF60 without moving, but had to go over to the Pentax flash to control it directly.
I usually don' have this issue, as in fact I often mix the manual Cactus flash with P-TTL Pentax automatic flash .... and P-TTL allows Flash Compensation from the camera flash modes display which controls the output of the P-TTL slaves .... very convenient.
.....Now, THIS is where it gets interesting ...... (as if it wasn't already!! ) ..... with this set-up here, I was NOT able to use P-TTL wireless control for my Pentax flash, and I was forced to use Manual flash power plus 'Dumb Slave' (SL2) optical triggering. The reason is that P-TTL requires an aperture coupled lens (in order for the aperture information to be used by the automatic metering system).
With an aperture coupled lens I can use an on-camera flash in P-TTL Wireless 'Controller' mode .... this sends the mode and power information to a P-TTL slave in 'SL1' mode. But with no aperture coupling then this P-TTL controller will not work. So, in Manual flash mode on the AF-540FGZ, I set 'SL2' slave mode .... this then responds to the first flash that it senses and fires at the same time ..... in this case it was triggered optically by the flash from the RF60 ... and it all comes together!
I must admit to feeling that this is all a really rather extraordinary combination and collaboration of technologies ..... a modern DSLR, a 1970s manual aperture lens, tubes with no contacts, a radio remote controlled flash system, plus a modern TTL flash that can function also as a 'dumb slave' ... all working together and producing images with complete control over every aspect !! .... Well, I'M amazed
My Guides to the Pentax Digital Camera Flash Lighting System : Download here from the PentaxForums Homepage Article .... link
Pentax K7 with BG-4 Grip / Samyang 14mm f2.8 ED AS IF UMC / DA18-55mm f3.5-5.6 AL WR / SMC A28mm f2.8 / D FA 28-105mm / SMC F35-70 f3.5-4.5 / SMC A50mm f1.7 / Tamron AF70-300mm f4-5.6 Di LD macro / SMC M75-150mm f4.0 / Tamron Adaptall (CT-135) 135mm f2.8 / Asahi Takumar-A 2X tele-converter / Pentax AF-540FGZ (I & II) Flashes / Cactus RF60/X Flashes & V6/V6II Transceiver
Pentax K7 with BG-4 Grip / Samyang 14mm f2.8 ED AS IF UMC / DA18-55mm f3.5-5.6 AL WR / SMC A28mm f2.8 / D FA 28-105mm / SMC F35-70 f3.5-4.5 / SMC A50mm f1.7 / Tamron AF70-300mm f4-5.6 Di LD macro / SMC M75-150mm f4.0 / Tamron Adaptall (CT-135) 135mm f2.8 / Asahi Takumar-A 2X tele-converter / Pentax AF-540FGZ (I & II) Flashes / Cactus RF60/X Flashes & V6/V6II Transceiver
Posted 25/03/2016 - 23:36
Link
It is great that the older gear can still work alongside the newer digital stuff. A bit like us
If the rf 60 has its own inbuilt receiver and just say you were using 2 rf 60s along with a v6 in transmitter mode can you have 1 of the flash units firing at a higher output than the other or would both have the same settings. ? I think If I understand what you were saying about the pentax flash is right that, you could have done that with the way you had your setup if you had wanted. ?
Is there much or any difference between the cactus and yonougo flashes and transmitters ?
(Probably should have started a new thread for this question rather than taking
Your shopkins down a side track )
Derek
If the rf 60 has its own inbuilt receiver and just say you were using 2 rf 60s along with a v6 in transmitter mode can you have 1 of the flash units firing at a higher output than the other or would both have the same settings. ? I think If I understand what you were saying about the pentax flash is right that, you could have done that with the way you had your setup if you had wanted. ?
Is there much or any difference between the cactus and yonougo flashes and transmitters ?
(Probably should have started a new thread for this question rather than taking
Your shopkins down a side track )
Derek
I know what i like, If not always why.
Posted 26/03/2016 - 00:50
Link
No problem Derek, we can carry on here ...
Each RF60 effectively has a V6 'transceiver' (transmitter & receiver) built-in. To receive a signal from the on-cameraV6, each RF60 needs to be set to the same channel as the V6 (eg Chan 1). The V6 also has 4 'groups', A B C D ..... each flash can be assigned to a group, so one on A and one on B. Now the V6 can independently control the power levels of those two flashes. You press the group button and turn the dial to change the power for just that group (1 flash in this case). Then you can change the other one.
You can also switch to controlling the flash zoom remotely also, but only with RF60s .... this feature does not work with other brands flashes. However, most other flashes will work remotely with additional V6's attached in 'receiver' mode and their power is controlled from the camera V6 using the group buttons in the same way.
So, you could have four flashes all set to different power levels from the same V6 .... They are called 'groups' because you can add extra flashes into each group, in order to get more power for example . But then each flash within one group will have the same power level as the other one ... they will both take the setting together.
I don't know anything about Yongnuo, other than what I pick up reading the flash forums ..... I believe the cactus V6 / RF60 combo may be the only one that offers remote control of flash head zoom as well as power.
The Cactus RF60 offers another advantage to Pentax users with its 'HSS Sympathy' mode, allowing optical slave triggering from a Pentax Dedicated System flash that is HSS capable, and the RF60 provides a 'proper' pulsed and timed HSS output. (Radio triggering from a V6 is not possible on Pentax DSLRs, only optical slave triggering, and we need an on-camera P-TTL / HSS controller flash). But as an HSS slave then the Cactus RF60 offers a very economical solution for those who already have the P-TTL flash to put on the camera.
Check out this HSS 3-flash Cactus/Pentax Demo I did over at PentaxForums ..... link
Each RF60 effectively has a V6 'transceiver' (transmitter & receiver) built-in. To receive a signal from the on-cameraV6, each RF60 needs to be set to the same channel as the V6 (eg Chan 1). The V6 also has 4 'groups', A B C D ..... each flash can be assigned to a group, so one on A and one on B. Now the V6 can independently control the power levels of those two flashes. You press the group button and turn the dial to change the power for just that group (1 flash in this case). Then you can change the other one.
You can also switch to controlling the flash zoom remotely also, but only with RF60s .... this feature does not work with other brands flashes. However, most other flashes will work remotely with additional V6's attached in 'receiver' mode and their power is controlled from the camera V6 using the group buttons in the same way.
So, you could have four flashes all set to different power levels from the same V6 .... They are called 'groups' because you can add extra flashes into each group, in order to get more power for example . But then each flash within one group will have the same power level as the other one ... they will both take the setting together.
I don't know anything about Yongnuo, other than what I pick up reading the flash forums ..... I believe the cactus V6 / RF60 combo may be the only one that offers remote control of flash head zoom as well as power.
The Cactus RF60 offers another advantage to Pentax users with its 'HSS Sympathy' mode, allowing optical slave triggering from a Pentax Dedicated System flash that is HSS capable, and the RF60 provides a 'proper' pulsed and timed HSS output. (Radio triggering from a V6 is not possible on Pentax DSLRs, only optical slave triggering, and we need an on-camera P-TTL / HSS controller flash). But as an HSS slave then the Cactus RF60 offers a very economical solution for those who already have the P-TTL flash to put on the camera.
Check out this HSS 3-flash Cactus/Pentax Demo I did over at PentaxForums ..... link
My Guides to the Pentax Digital Camera Flash Lighting System : Download here from the PentaxForums Homepage Article .... link
Pentax K7 with BG-4 Grip / Samyang 14mm f2.8 ED AS IF UMC / DA18-55mm f3.5-5.6 AL WR / SMC A28mm f2.8 / D FA 28-105mm / SMC F35-70 f3.5-4.5 / SMC A50mm f1.7 / Tamron AF70-300mm f4-5.6 Di LD macro / SMC M75-150mm f4.0 / Tamron Adaptall (CT-135) 135mm f2.8 / Asahi Takumar-A 2X tele-converter / Pentax AF-540FGZ (I & II) Flashes / Cactus RF60/X Flashes & V6/V6II Transceiver
Pentax K7 with BG-4 Grip / Samyang 14mm f2.8 ED AS IF UMC / DA18-55mm f3.5-5.6 AL WR / SMC A28mm f2.8 / D FA 28-105mm / SMC F35-70 f3.5-4.5 / SMC A50mm f1.7 / Tamron AF70-300mm f4-5.6 Di LD macro / SMC M75-150mm f4.0 / Tamron Adaptall (CT-135) 135mm f2.8 / Asahi Takumar-A 2X tele-converter / Pentax AF-540FGZ (I & II) Flashes / Cactus RF60/X Flashes & V6/V6II Transceiver
Posted 26/03/2016 - 01:13
Link
Very nice images but I have to accept that I am a total technophobe when faced with discussions of this sort. My brain just goes numb
Posted 26/03/2016 - 07:49
Link
davidwozhere wrote:
Very nice images but I have to accept that I am a total technophobe when faced with discussions of this sort. My brain just goes numb
... I don't actually own a separate flashgun any more.Very nice images but I have to accept that I am a total technophobe when faced with discussions of this sort. My brain just goes numb
Perfect exposure Nigel. Perfect.
Best wishes,
Andrew
"These places mean something and it's the job of a photographer to figure-out what the hell it is."
Robert Adams
"The camera doesn't make a bit of difference. All of them can record what you are seeing. But, you have to SEE."
Ernst Hass
My website: http://www.ephotozine.com/user/bwlchmawr-199050
http://s927.photobucket.com/home/ADC3440/index
https://www.flickr.com/photos/78898196@N05
Andrew
"These places mean something and it's the job of a photographer to figure-out what the hell it is."
Robert Adams
"The camera doesn't make a bit of difference. All of them can record what you are seeing. But, you have to SEE."
Ernst Hass
My website: http://www.ephotozine.com/user/bwlchmawr-199050
http://s927.photobucket.com/home/ADC3440/index
https://www.flickr.com/photos/78898196@N05
Posted 26/03/2016 - 11:03
Link
Cheers Nigel, i had a look at the linked demo, very comprehensive and well presented as ever.
I think it is something i will have to revisit whenever i get a chance to buy some flash units and triggers, i think the best way for me to learn is to actually use them and try different settings and setups.
I will no doubt be back to pester you when i do
Derek
I think it is something i will have to revisit whenever i get a chance to buy some flash units and triggers, i think the best way for me to learn is to actually use them and try different settings and setups.
I will no doubt be back to pester you when i do
Derek
I know what i like, If not always why.
Posted 26/03/2016 - 15:58
Link
a great write up on the technique, very informative. Like the images as well
Posted 26/03/2016 - 16:36
Link
bwlchmawr wrote:
..... Perfect exposure Nigel. Perfect.
Ah Andrew, I see you've been checking out my whites there! Clearly we think alike in looking for well placed black and white points ..... the camera histogram has become a great friend indeed ...... Perfect exposure Nigel. Perfect.
David, I guess its all about the results firstly ... (well, sort of, I admit to getting just as much enjoyment from all the messing around with flashes and gear as I do from the taking the actual pictures!!). Unfortunately flash technologies and the various permutations available to us is guaranteed to provide endless ongoing technobabble ....
Thanks also Top-banana, I'm pleased you found it interesting
My Guides to the Pentax Digital Camera Flash Lighting System : Download here from the PentaxForums Homepage Article .... link
Pentax K7 with BG-4 Grip / Samyang 14mm f2.8 ED AS IF UMC / DA18-55mm f3.5-5.6 AL WR / SMC A28mm f2.8 / D FA 28-105mm / SMC F35-70 f3.5-4.5 / SMC A50mm f1.7 / Tamron AF70-300mm f4-5.6 Di LD macro / SMC M75-150mm f4.0 / Tamron Adaptall (CT-135) 135mm f2.8 / Asahi Takumar-A 2X tele-converter / Pentax AF-540FGZ (I & II) Flashes / Cactus RF60/X Flashes & V6/V6II Transceiver
Pentax K7 with BG-4 Grip / Samyang 14mm f2.8 ED AS IF UMC / DA18-55mm f3.5-5.6 AL WR / SMC A28mm f2.8 / D FA 28-105mm / SMC F35-70 f3.5-4.5 / SMC A50mm f1.7 / Tamron AF70-300mm f4-5.6 Di LD macro / SMC M75-150mm f4.0 / Tamron Adaptall (CT-135) 135mm f2.8 / Asahi Takumar-A 2X tele-converter / Pentax AF-540FGZ (I & II) Flashes / Cactus RF60/X Flashes & V6/V6II Transceiver
Posted 26/03/2016 - 16:39
Link
Did you peel off the wallpaper to improve the lighting?
Posted 26/03/2016 - 16:58
Link
Well as you can see photography and messing around with loads of gear takes priority over the DIY !
Good idea about the lighting, I must admit I do like that cream surface for bounce flash
Good idea about the lighting, I must admit I do like that cream surface for bounce flash
My Guides to the Pentax Digital Camera Flash Lighting System : Download here from the PentaxForums Homepage Article .... link
Pentax K7 with BG-4 Grip / Samyang 14mm f2.8 ED AS IF UMC / DA18-55mm f3.5-5.6 AL WR / SMC A28mm f2.8 / D FA 28-105mm / SMC F35-70 f3.5-4.5 / SMC A50mm f1.7 / Tamron AF70-300mm f4-5.6 Di LD macro / SMC M75-150mm f4.0 / Tamron Adaptall (CT-135) 135mm f2.8 / Asahi Takumar-A 2X tele-converter / Pentax AF-540FGZ (I & II) Flashes / Cactus RF60/X Flashes & V6/V6II Transceiver
Pentax K7 with BG-4 Grip / Samyang 14mm f2.8 ED AS IF UMC / DA18-55mm f3.5-5.6 AL WR / SMC A28mm f2.8 / D FA 28-105mm / SMC F35-70 f3.5-4.5 / SMC A50mm f1.7 / Tamron AF70-300mm f4-5.6 Di LD macro / SMC M75-150mm f4.0 / Tamron Adaptall (CT-135) 135mm f2.8 / Asahi Takumar-A 2X tele-converter / Pentax AF-540FGZ (I & II) Flashes / Cactus RF60/X Flashes & V6/V6II Transceiver
Posted 27/03/2016 - 08:24
Link
I still haven't ventured into the flash world Nigel. I feel guilty reading your write ups on this mate.
On another note though, my kids love these and they loved looking at your photos! Naming the shopkins as they went through your post
On another note though, my kids love these and they loved looking at your photos! Naming the shopkins as they went through your post
Posted 27/03/2016 - 11:56
Link
Good Richard, I'm pleased! You should feel very bad You have been very very naughty and all of your Shopkins should be taken away!
Glad to hear the kids liked that shots ... Mine too ... It's quite fascinating to see them so close, they take on more character.
These could be done with natural window light, for example, but I see the advantage with flash to be contrast control .... The ambient exposure to hold the whites correctly would be rather low in natural light I think, and there would be dark shadows distracting. The flash from behind has lit these areas and evened out the contrast, although I still aimed to get some shape from the primary side light.
Glad to hear the kids liked that shots ... Mine too ... It's quite fascinating to see them so close, they take on more character.
These could be done with natural window light, for example, but I see the advantage with flash to be contrast control .... The ambient exposure to hold the whites correctly would be rather low in natural light I think, and there would be dark shadows distracting. The flash from behind has lit these areas and evened out the contrast, although I still aimed to get some shape from the primary side light.
My Guides to the Pentax Digital Camera Flash Lighting System : Download here from the PentaxForums Homepage Article .... link
Pentax K7 with BG-4 Grip / Samyang 14mm f2.8 ED AS IF UMC / DA18-55mm f3.5-5.6 AL WR / SMC A28mm f2.8 / D FA 28-105mm / SMC F35-70 f3.5-4.5 / SMC A50mm f1.7 / Tamron AF70-300mm f4-5.6 Di LD macro / SMC M75-150mm f4.0 / Tamron Adaptall (CT-135) 135mm f2.8 / Asahi Takumar-A 2X tele-converter / Pentax AF-540FGZ (I & II) Flashes / Cactus RF60/X Flashes & V6/V6II Transceiver
Pentax K7 with BG-4 Grip / Samyang 14mm f2.8 ED AS IF UMC / DA18-55mm f3.5-5.6 AL WR / SMC A28mm f2.8 / D FA 28-105mm / SMC F35-70 f3.5-4.5 / SMC A50mm f1.7 / Tamron AF70-300mm f4-5.6 Di LD macro / SMC M75-150mm f4.0 / Tamron Adaptall (CT-135) 135mm f2.8 / Asahi Takumar-A 2X tele-converter / Pentax AF-540FGZ (I & II) Flashes / Cactus RF60/X Flashes & V6/V6II Transceiver
Posted 27/03/2016 - 22:12
Link
Have you been painting them yourself?
I've been asked to ask...
I've been asked to ask...
Add Comment
To leave a comment - Log in to Pentax User or create a new account.


5986 posts
14 years
Surrey,
England
So I set up the K7 on a tripod with the Tamron Adaptall 135mm f2.8 plus 13 & 31mm extension tubes. For lighting I used a 60x60cm softbox with Cactus RF60 flash to camera left at around 60deg and slightly higher than my subjects, plus a second flash, a Pentax AF-540FGZ with a 'PowerSnoot' diagonally opposite the softbox. The flashes were triggered by the Cactus V6 transceiver.
Heres a couple of phone snaps of the setup .....
(If you look closely you might just make out the tiny Shopkins on the sofa )
The tubes have no contacts, so I set the lens to manual aperture mode. I set f2.8 to view and focus, then stopped down to f8 for the shots. I used a remote control with mirror up to take the shots.
And finally what it was all for ......
ISO 100, F8.0, 1/180sec .... 'M' camera mode, Manual flash exposures
Hope you enjoyed meeting the Shopkins .... I can thoroughly recommend them, both for keeping the kids occupied as well as a good excuse to mess around with camera and flash equipment!
Pentax K7 with BG-4 Grip / Samyang 14mm f2.8 ED AS IF UMC / DA18-55mm f3.5-5.6 AL WR / SMC A28mm f2.8 / D FA 28-105mm / SMC F35-70 f3.5-4.5 / SMC A50mm f1.7 / Tamron AF70-300mm f4-5.6 Di LD macro / SMC M75-150mm f4.0 / Tamron Adaptall (CT-135) 135mm f2.8 / Asahi Takumar-A 2X tele-converter / Pentax AF-540FGZ (I & II) Flashes / Cactus RF60/X Flashes & V6/V6II Transceiver