K5 - Exposure bracketing with contant aperture...again
Posted 05/06/2013 - 22:47
Link
I guess it was worth a try. AFAIK setting the Highlight Correction (or any other parameter) on the camera simply stores the metadata for application once the file is opened in PDCU, and it will be applied and processed by the camera when generating the JPEG preview you see on the LCD (and also for any output JPEGs from the camera).
Its only metadata, so won't make any difference to the RAW file at all. You can go ahead in PDCU and make any adjustments. There is greater fine control and more options in the software though. I'm surprised you didn't have success with this highlight correction though. Once you've set the DR increase try changing the High / Low one - this alters the bias over the range of highs.
But, clearly this area is very overexposed, so the HDR was the best option I think.
Its only metadata, so won't make any difference to the RAW file at all. You can go ahead in PDCU and make any adjustments. There is greater fine control and more options in the software though. I'm surprised you didn't have success with this highlight correction though. Once you've set the DR increase try changing the High / Low one - this alters the bias over the range of highs.
But, clearly this area is very overexposed, so the HDR was the best option I think.
My Guides to the Pentax Digital Camera Flash Lighting System : Download here from the PentaxForums Homepage Article .... link
Pentax K7 with BG-4 Grip / Samyang 14mm f2.8 ED AS IF UMC / DA18-55mm f3.5-5.6 AL WR / SMC A28mm f2.8 / D FA 28-105mm / SMC F35-70 f3.5-4.5 / SMC A50mm f1.7 / Tamron AF70-300mm f4-5.6 Di LD macro / SMC M75-150mm f4.0 / Tamron Adaptall (CT-135) 135mm f2.8 / Asahi Takumar-A 2X tele-converter / Pentax AF-540FGZ (I & II) Flashes / Cactus RF60/X Flashes & V6/V6II Transceiver
Pentax K7 with BG-4 Grip / Samyang 14mm f2.8 ED AS IF UMC / DA18-55mm f3.5-5.6 AL WR / SMC A28mm f2.8 / D FA 28-105mm / SMC F35-70 f3.5-4.5 / SMC A50mm f1.7 / Tamron AF70-300mm f4-5.6 Di LD macro / SMC M75-150mm f4.0 / Tamron Adaptall (CT-135) 135mm f2.8 / Asahi Takumar-A 2X tele-converter / Pentax AF-540FGZ (I & II) Flashes / Cactus RF60/X Flashes & V6/V6II Transceiver
Posted 05/06/2013 - 23:41
Link
I would go with John's suggestion. Get a decent tripod and bracket manually between shots. It's by far the easiest method.
Regards
David
Regards
David
Posted 09/06/2013 - 00:25
Link
Have a look at your e-dial Programming on page 5 of the menu, page 2 of that offers changes to what the green button does in Manual exposure. Mine's set to 'Tv Shift', and when I just tried bracketing in Manual mode, it only changed the shutter speed. When I changed it to 'P Line', it then varied the aperture too.
Dan
Dan
K-3, a macro lens and a DA*300mm...
Posted 09/06/2013 - 10:32
Link
Excellent, that seems to work. My camera was set to P LINE, presumably the factory default. Thank you very much Dan. Just as I was giving up on it you came up with a solution!
I'd have never thought of trying that. I'll definitely be using M mode now when I take a set of bracketed shots and want to ensure the base exposure remains the same.
Pity it's not explained in the manual, but I suppose the manual would have to be twice the size if it went into that level of detail and it might become a bit overwhelming.
I'd have never thought of trying that. I'll definitely be using M mode now when I take a set of bracketed shots and want to ensure the base exposure remains the same.
Pity it's not explained in the manual, but I suppose the manual would have to be twice the size if it went into that level of detail and it might become a bit overwhelming.
Posted 09/06/2013 - 13:33
Link
In manual mode (M) only the 1st bracketing selection seems to
work.... from memory that's 0, +, -
Setting 3 seems to give T, 0.5 of T, 0.25 of T
which is very inconvenient and needs fixing by
Pentax
.
work.... from memory that's 0, +, -
Setting 3 seems to give T, 0.5 of T, 0.25 of T
which is very inconvenient and needs fixing by
Pentax
.
Half Man... Half Pentax ... Half Cucumber
Pentax K-1 + K-5 and some other stuff
Algi
Pentax K-1 + K-5 and some other stuff
Algi
Posted 09/06/2013 - 16:45
Link
Algernon, I've only done a few test shots but so far Dan's solution seems to work for me, with the auto bracketing order set to 1 and 3.
I think what's happening is that the status display shows the exposure of the first shot in the sequence. Thus:
With auto bracketing order set to 1 (0 - +) for three exposures at 1EV intervals I get shutter times of:
T, T/2, 2*T (T is shown on the display)
With auto bracketing order set to 3 (+ 0 -) I get shutter times of:
2*T, T, T/2 (2*T is shown on the display)
So I think the exposures and sequences are correct, it's a question of the exposure time display changing to reflect the exposure offset of the first shot in the bracketing sequence. (In M mode and with the auto bracketing order set to 3 monitor and switch the Drive Mode between single and auto bracketing - note how the time display changes).
(I'm using a K-5IIs with firmware version 1.04)
I think what's happening is that the status display shows the exposure of the first shot in the sequence. Thus:
With auto bracketing order set to 1 (0 - +) for three exposures at 1EV intervals I get shutter times of:
T, T/2, 2*T (T is shown on the display)
With auto bracketing order set to 3 (+ 0 -) I get shutter times of:
2*T, T, T/2 (2*T is shown on the display)
So I think the exposures and sequences are correct, it's a question of the exposure time display changing to reflect the exposure offset of the first shot in the bracketing sequence. (In M mode and with the auto bracketing order set to 3 monitor and switch the Drive Mode between single and auto bracketing - note how the time display changes).
(I'm using a K-5IIs with firmware version 1.04)
Posted 09/06/2013 - 16:55
Link
It sounds like they have rectified the error on the K-5IIs
On the K-5 I can't get 2*T in the 1st position, which is
annoying because I like to see bracketed shots 2*T, T, T/2
or the reverse T/2, T, 2*T..... in critical situations I
number the files on the PC with and A, B ot C prefix to
set the sort order I want.
Has anyone else managed 2*T, T, T/2 on K-5 with v1.14
firmware (latest). ?
-
On the K-5 I can't get 2*T in the 1st position, which is
annoying because I like to see bracketed shots 2*T, T, T/2
or the reverse T/2, T, 2*T..... in critical situations I
number the files on the PC with and A, B ot C prefix to
set the sort order I want.
Has anyone else managed 2*T, T, T/2 on K-5 with v1.14
firmware (latest). ?
-
Half Man... Half Pentax ... Half Cucumber
Pentax K-1 + K-5 and some other stuff
Algi
Pentax K-1 + K-5 and some other stuff
Algi
Posted 09/06/2013 - 18:05
Link
Are you sure you're not getting 2*T on the first shot?
If you set the exposure time (T) in single frame drive mode, does the time displayed then not change to 2*T when you set auto bracketing drive mode (assuming auto bracket order 3 with the first bracket in the sequence +1EV)?
You've done Dan's suggestion of programming the Green button in M mode to 'Tv Shift'?
If you set the exposure time (T) in single frame drive mode, does the time displayed then not change to 2*T when you set auto bracketing drive mode (assuming auto bracket order 3 with the first bracket in the sequence +1EV)?
You've done Dan's suggestion of programming the Green button in M mode to 'Tv Shift'?
Posted 09/06/2013 - 18:47
Link
Green button in M mode is set to 'Tv Shift' I can't remember
ever changing it.
If I meter via the Green Button first it does change
to 2*T when I set auto bracketing drive mode, but it
doesn't seem to do it if I manually set the speed,
something does seem not right. I might have to experiment
a bit more.
If I manually set 1/400th as the speed I get the following
in the 4 menu settings.
1: 400 --- 800 --- 200
2: 400 --- 200 --- 100
3: 400 --- 800 --- 1600
4: 400 --- 200 --- 800
It looks like I'm safe using 1 or 4 even though I don't like the
sequence.
They were all done with the Drive Mode left in
auto bracketing.
Another useful tip in M mode is to press the AE-L button
when using a lens set on 'A' and the speed/aperture change
together when you move the front or rear wheel.
Handy for the Sunny 16 rule with say 100ISO set it
at 1/100th ---- f/16 and then move to something like
1/320th ---- f/9
'
ever changing it.
If I meter via the Green Button first it does change
to 2*T when I set auto bracketing drive mode, but it
doesn't seem to do it if I manually set the speed,
something does seem not right. I might have to experiment
a bit more.
If I manually set 1/400th as the speed I get the following
in the 4 menu settings.
1: 400 --- 800 --- 200
2: 400 --- 200 --- 100
3: 400 --- 800 --- 1600
4: 400 --- 200 --- 800
It looks like I'm safe using 1 or 4 even though I don't like the
sequence.
They were all done with the Drive Mode left in
auto bracketing.
Another useful tip in M mode is to press the AE-L button
when using a lens set on 'A' and the speed/aperture change
together when you move the front or rear wheel.
Handy for the Sunny 16 rule with say 100ISO set it
at 1/100th ---- f/16 and then move to something like
1/320th ---- f/9
'
Half Man... Half Pentax ... Half Cucumber
Pentax K-1 + K-5 and some other stuff
Algi
Pentax K-1 + K-5 and some other stuff
Algi
Posted 09/06/2013 - 20:34
Link
Sorry, just to double check in case I'm still misunderstanding.
If I manually set the speed in auto bracketing drive mode the time displayed is the exposure time of the first shot in the sequence, regardless of sequence order. (This behaviour is the same in the other modes, not just M mode, and the same if I apply any exposure compensation).
In your example, if I manually set 1/400th as the speed with auto bracketing mode 1 (with 1 stop bracket) I get:
1: 400 --- 800 --- 200
If I now switch auto bracketing modes (** without altering the exposure speed dial **) I get:
2: 800 --- 400 --- 200
3: 200 --- 400 --- 800
4: 400 --- 200 --- 800
If it really doesn't work this way for you then I guess Pentax realised there was an inconsitency and have fixed it in more recent software/models.
Thanks for the AE-L button tip.
If I manually set the speed in auto bracketing drive mode the time displayed is the exposure time of the first shot in the sequence, regardless of sequence order. (This behaviour is the same in the other modes, not just M mode, and the same if I apply any exposure compensation).
In your example, if I manually set 1/400th as the speed with auto bracketing mode 1 (with 1 stop bracket) I get:
1: 400 --- 800 --- 200
If I now switch auto bracketing modes (** without altering the exposure speed dial **) I get:
2: 800 --- 400 --- 200
3: 200 --- 400 --- 800
4: 400 --- 200 --- 800
If it really doesn't work this way for you then I guess Pentax realised there was an inconsitency and have fixed it in more recent software/models.
Thanks for the AE-L button tip.
Posted 09/06/2013 - 20:47
Link
bracketing in manual mode keeps apeture constant and varies the shutter speed - used it loads of times yesterday
- -
Mike
Pentax K5 / Pentax K5 11/ Pentax K200D / Canon Rebel T1 i / Canon 650D / Pentax MX-1 / Fuji XF1 /Fuji X 10 / Canon EOS-M / Canon G10/ Pentax Mz-7 x 2
Mike
Pentax K5 / Pentax K5 11/ Pentax K200D / Canon Rebel T1 i / Canon 650D / Pentax MX-1 / Fuji XF1 /Fuji X 10 / Canon EOS-M / Canon G10/ Pentax Mz-7 x 2
Posted 09/06/2013 - 21:14
Link
judderman62, as Dan has pointed out, auto bracketing in manual mode only keeps the aperture constant if the Green button for manual mode is programmed as 'Tv SHIFT'. If the Green button is programmed as 'P LINE', 'Av SHIFT' or '- -' then auto bracketing is performed by varying both aperture and exposure time. I'm not sure how one could work that out from the manual!
On the K5-IIs the default for the Green button in manual mode is 'P LINE'. Perhaps the default on the K-5 is 'Tv SHIFT'?
The other query which Algi raised is the way auto bracketing varies with sequence order. I'm happy with the way it works on the K5-IIs.
On the K5-IIs the default for the Green button in manual mode is 'P LINE'. Perhaps the default on the K-5 is 'Tv SHIFT'?
The other query which Algi raised is the way auto bracketing varies with sequence order. I'm happy with the way it works on the K5-IIs.
Posted 09/06/2013 - 22:10
Link
I have no idea what the green button is or does but having just checked some shots I took yesterday they do indeed have different apeture settings - I never realised this
I shall have to read up on all the stuff you mention above - thanks for that
I shall have to read up on all the stuff you mention above - thanks for that
- -
Mike
Pentax K5 / Pentax K5 11/ Pentax K200D / Canon Rebel T1 i / Canon 650D / Pentax MX-1 / Fuji XF1 /Fuji X 10 / Canon EOS-M / Canon G10/ Pentax Mz-7 x 2
Mike
Pentax K5 / Pentax K5 11/ Pentax K200D / Canon Rebel T1 i / Canon 650D / Pentax MX-1 / Fuji XF1 /Fuji X 10 / Canon EOS-M / Canon G10/ Pentax Mz-7 x 2
Posted 05/07/2013 - 23:18
Link
WaypointCharlie wrote:
judderman62, as Dan has pointed out, auto bracketing in manual mode only keeps the aperture constant if the Green button for manual mode is programmed as 'Tv SHIFT'. If the Green button is programmed as 'P LINE', 'Av SHIFT' or '- -' then auto bracketing is performed by varying both aperture and exposure time. I'm not sure how one could work that out from the manual!
On the K5-IIs the default for the Green button in manual mode is 'P LINE'. Perhaps the default on the K-5 is 'Tv SHIFT'?
The other query which Algi raised is the way auto bracketing varies with sequence order. I'm happy with the way it works on the K5-IIs.
Does anyone know how to do this and be prepared to walk me through it step by step in "for dummies"language ?judderman62, as Dan has pointed out, auto bracketing in manual mode only keeps the aperture constant if the Green button for manual mode is programmed as 'Tv SHIFT'. If the Green button is programmed as 'P LINE', 'Av SHIFT' or '- -' then auto bracketing is performed by varying both aperture and exposure time. I'm not sure how one could work that out from the manual!
On the K5-IIs the default for the Green button in manual mode is 'P LINE'. Perhaps the default on the K-5 is 'Tv SHIFT'?
The other query which Algi raised is the way auto bracketing varies with sequence order. I'm happy with the way it works on the K5-IIs.
I have had a play and can't work out how to do this
many thanks
- -
Mike
Pentax K5 / Pentax K5 11/ Pentax K200D / Canon Rebel T1 i / Canon 650D / Pentax MX-1 / Fuji XF1 /Fuji X 10 / Canon EOS-M / Canon G10/ Pentax Mz-7 x 2
Mike
Pentax K5 / Pentax K5 11/ Pentax K200D / Canon Rebel T1 i / Canon 650D / Pentax MX-1 / Fuji XF1 /Fuji X 10 / Canon EOS-M / Canon G10/ Pentax Mz-7 x 2
Add Comment
To leave a comment - Log in to Pentax User or create a new account.


201 posts
14 years
Cambridge
I've only been able to bracket with a constant aperture using Av and AvHyper modes. I've never found a way of auto bracketing on ISO, not even in TAv mode.
I just tried PDCU (I had to install version 4.4 as my old version 4.3 doesn't recognise the K-5II Raw files). I may be doing something wrong but I find the Highlight Adjustment on that shot worse with PDCU that I can obtain with Adobe Camera Raw (and I'm still using the 2010 process on version 6.7, not the latest version that comes with Lightroom). Perhaps it would help if I shot with Highlight Correction enabled on the camera to soften the highlights (this affects the Raw output, not just JPEG) but I don't like sacrificing a stop of ISO. However, I feel when creating an HDR there's no substitute for having one bracket correctly exposed for the highlights. It's a bit like a studio shot, given you're in control there's no real excuse for not getting it! (You're welcome to the Raw file if you want to try for yourself).
(One reason I don't use PDCU is I couldn't find support for custom camera profiles)