K10D raw and photoshop version 7
Posted 13/10/2008 - 23:46
Link
Photoshop 7 is fine, but before you open an image it needs to be in a recognised format.
Typically the RAW file is opened in a Raw Converter and there is one provided with the camera - Pentax Photo Laboratory. Use this or a similar program to open the RAW file and then re-save it as either a JPEG or TIFF. PS7 will be able to open both of these formats without a problem.
Typically the RAW file is opened in a Raw Converter and there is one provided with the camera - Pentax Photo Laboratory. Use this or a similar program to open the RAW file and then re-save it as either a JPEG or TIFF. PS7 will be able to open both of these formats without a problem.
Best regards, John
Posted 13/10/2008 - 23:57
Link
Thanks John
reading previous posts i take it that TIFF is preferable? as you dont loose anything or is jpeg also fine?
thanks
will
reading previous posts i take it that TIFF is preferable? as you dont loose anything or is jpeg also fine?
thanks
will
K7D DA 18-55 mk11WR|50-200 wr|DA16-45|Tamron SP90|lots of manual pentax glass
Posted 13/10/2008 - 23:58
Link
With Silkypix, you can't convert to .RAW (what is .RAW?) but you can convert, or "develop" as they call it, to .TIFF or .JPEG.
Use Tiff if you are going to process further with PhotoShop.
Silkypix can do some of what PhotoShop can do very well, though, so you may not need to use PhotoShop at all if you just wish to alter basic things like overall brightness, tone, colour, sharpening and noise reduction, etc. It's also fine for cropping and resizing.
Use Tiff if you are going to process further with PhotoShop.
Silkypix can do some of what PhotoShop can do very well, though, so you may not need to use PhotoShop at all if you just wish to alter basic things like overall brightness, tone, colour, sharpening and noise reduction, etc. It's also fine for cropping and resizing.
~Pete
Posted 14/10/2008 - 00:02
Link
JPEG is a "lossy" format, so the non-lossy TIFF is indeed preferable.
After a file is opened and worked on I always re-save as a TIFF.
After a file is opened and worked on I always re-save as a TIFF.
Best regards, John
Posted 14/10/2008 - 00:11
Link
ok thanks - i downloaded the free version of silkypix and it does indeed look nice and simple to use with a good interface design - i would like to learn to use photoshop as its on my laptop doing nothing and during dinner hours at work i can then spend some time experementing with these programs.
I see there in an option in the pentax software to save as both tiff 8 & 16 bit so i will try both.
thanks
will
I see there in an option in the pentax software to save as both tiff 8 & 16 bit so i will try both.
thanks
will
K7D DA 18-55 mk11WR|50-200 wr|DA16-45|Tamron SP90|lots of manual pentax glass
Posted 14/10/2008 - 00:14
Link
Normally save as 8 bit TIFF. 16 bit prevents you from using quite a few features within PS7.
Best regards, John
Posted 14/10/2008 - 06:32
Link
I use this rule of thumb:
If I can get 99% where I want inside Silkypix then I'll save as JPG (you can adjust the quality), then do minor edits in Photoshop and save as PSD file (because I always use layers).
If I need to wrestle with the shot a bit (like severe dodge & burn etc), or anticipate printing in large format, then I'll save as 8-bit TIFF. If there's a ton of PP to do then I'll use 16-bit TIFF - but John is correct - you'll not be able to access many of the filters and facilities. Photoshop CS2 gives you most of what you need when working with 16-bit.
It does depend on (a) how many shots you're dealing with, (b) what you need to do to the image in Photoshop, (c) how much hard drive space you have
Don't forget that you can always go back to the RAW converter and re-export the image If you work in layers in Photoshop and save the full PSD file then you can always go back and pull in a TIFF file later (If you've found you have a winner!)
Matt
If I can get 99% where I want inside Silkypix then I'll save as JPG (you can adjust the quality), then do minor edits in Photoshop and save as PSD file (because I always use layers).
If I need to wrestle with the shot a bit (like severe dodge & burn etc), or anticipate printing in large format, then I'll save as 8-bit TIFF. If there's a ton of PP to do then I'll use 16-bit TIFF - but John is correct - you'll not be able to access many of the filters and facilities. Photoshop CS2 gives you most of what you need when working with 16-bit.
It does depend on (a) how many shots you're dealing with, (b) what you need to do to the image in Photoshop, (c) how much hard drive space you have
Don't forget that you can always go back to the RAW converter and re-export the image If you work in layers in Photoshop and save the full PSD file then you can always go back and pull in a TIFF file later (If you've found you have a winner!)
Matt
http://www.mattmatic.co.uk
(For gallery, tips and links)
(For gallery, tips and links)
Posted 14/10/2008 - 09:11
Link
Does the Photoshop Elements allow you to work with DNG files? I thought the perpose of using DNG or any raw format was so you could put right most of what you got wrong in the camera. So I was thinking about getting a photo editing package that would allow me to do this. Any comments?
Pentax K10D 18-55 Kit Lens, Sigma 70-300, Photoshop CS (for now).
Posted 14/10/2008 - 09:30
Link
Your right as regards DNG/RAW format, Photoshop Elements,Photoshop CS2/CS3 etc will let you edit Raw/DNG files, the main thing is the Raw Converter, Adobe Camera Raw (Standaloan or with Photoshop)now 4.5 or 4.6, Silkypix 3 which most favour here, Phase One capture 4, are all for working with Raw.
What software are you useing at the moment:
What Camera are you useing : There is many ways to work with Raw files and if we know what you have we can point you into the right direction.
What software are you useing at the moment:
What Camera are you useing : There is many ways to work with Raw files and if we know what you have we can point you into the right direction.
Tel,
Posted 14/10/2008 - 09:30
Link
ibcsweb,
You have a few options:
1) Use standalone RAW converter (like Silkypix or Capture One) and use the JPG or TIFF files in Elements.
2) Use PEF in camera and use the Adobe stand alone RAW converter to produce DNG files.
3) Shoot DNG in camera (which is larger)
Option 1 is the best approach if you want to maximise image quality
Silkypix has a free version - I'd suggest starting with that and working out which way you want to go. Since using Silkypix the need for Photoshop work on most shots has been reduced drastically - ideal for events and weddings etc - you get print-ready shots pretty much straight out of Silkypix Developer Studio (paid version).
Can't remember which version of Elements handles DNG... but definitely Elements is a good choice. It's fast, it's cheap, and means that if you migrate up to full Photoshop at some later time then you still have a wealth of knowledge and experience that's valid.
Elements is a fine package, and can be pushed "harder" with books and websites like www.hiddenelements.com
Hope that helps!
Matt
You have a few options:
1) Use standalone RAW converter (like Silkypix or Capture One) and use the JPG or TIFF files in Elements.
2) Use PEF in camera and use the Adobe stand alone RAW converter to produce DNG files.
3) Shoot DNG in camera (which is larger)
Option 1 is the best approach if you want to maximise image quality
Silkypix has a free version - I'd suggest starting with that and working out which way you want to go. Since using Silkypix the need for Photoshop work on most shots has been reduced drastically - ideal for events and weddings etc - you get print-ready shots pretty much straight out of Silkypix Developer Studio (paid version).
Can't remember which version of Elements handles DNG... but definitely Elements is a good choice. It's fast, it's cheap, and means that if you migrate up to full Photoshop at some later time then you still have a wealth of knowledge and experience that's valid.
Elements is a fine package, and can be pushed "harder" with books and websites like www.hiddenelements.com
Hope that helps!
Matt
http://www.mattmatic.co.uk
(For gallery, tips and links)
(For gallery, tips and links)
Posted 14/10/2008 - 09:37
Link
I think with Pentax raw/dng files it's Elements 6,7,
I might be wrong as I use CS3/Silkypix/Lightroom.
I might be wrong as I use CS3/Silkypix/Lightroom.
Tel,
Posted 14/10/2008 - 12:32
Link
MattMatic wrote:
I use this rule of thumb:
If I can get 99% where I want inside Silkypix then I'll save as JPG (you can adjust the quality), then do minor edits in Photoshop and save as PSD file (because I always use layers).
Is a JPEG uncompressed when you set the quality to "100%"?
I use this rule of thumb:
If I can get 99% where I want inside Silkypix then I'll save as JPG (you can adjust the quality), then do minor edits in Photoshop and save as PSD file (because I always use layers).
~Pete
Posted 14/10/2008 - 12:38
Link
It's still compressed, but you'd be hard pressed to see any difference between it and a TIFF.
Dan
Dan
K-3, a macro lens and a DA*300mm...
Posted 14/10/2008 - 12:54
Link
Quote:
Is a JPEG uncompressed when you set the quality to "100%"?
Hmmm. Long answer coming up Is a JPEG uncompressed when you set the quality to "100%"?
Unlike TIFF, a JPG is split into two component parts. There is the colour information and the luminance information. Even at 100% the JPG format still contains far less blue information when compared with the other channels (11% IIRC).
Now whether that matters depends on what you're going to do afterwards... if you're going to push around the colour channels and try and lift shadow detail from the darkest depths of the image then use TIFF - there'll be more info there. If you need to basic dodge & burn, colour cast adjustments - ie 95% of the usual photographic stuff then JPG should be fine.
However, as I hinted, if you work with layers within Photoshop (which are TIFF-like internally) then you can always slide in a TIFF version if the JPG shows signs of falling apart (because you've pushed it too hard).
For disk-space, speed, and convenience a JPG works just fine
Matt
http://www.mattmatic.co.uk
(For gallery, tips and links)
(For gallery, tips and links)
Add Comment
To leave a comment - Log in to Pentax User or create a new account.


228 posts
22 years
Somerset UK
My works laptop has adobe photoshop 7 installed so i thought i would edit some .pef files however photoshop7 does not recognise them, i tried the .dng format but this is also not supported and there are no updates on the adobe site for .dng or raw with version 7 only cs or above. I have downloaded the free version of silkypix but cannot see how to convert the .pef to .raw for use in photoshop. the photoshop menu does list the .raw format as a filetype so I am a little lost as to what to try next, i could convert to jpeg but i understand some quality may be lost.
so any suggestions on how to converst the .dng or .pef to work in photoshop 7? it seems a shame to let the software go unused and the works library has lots of books on this version of photoshop too
thanks
will
K7D DA 18-55 mk11WR|50-200 wr|DA16-45|Tamron SP90|lots of manual pentax glass