k10 v k20
Posted 09/09/2009 - 19:14
Link
Now I know how the K10 D really can perform I would not sell it anyway so john`s comment doesn`t matter. It was set to zero before I adjusted it. Yes I do adjust it for each lens I put on but that only takes a few seconds.
Cedric
Cedric
Enjoy life
Posted 09/09/2009 - 20:02
Link
My K10D is permanently on debug mode, and for the most part it stays on one setting. I really must check all the lenses thoroughly and make a note of the numbers.
It is a piece of cake to change if you know the numbers for each lens.
Most of the time they are all close enough not to worry, but if you're shooting wide open it's worth making a quick adjustment if you have time.
It is a piece of cake to change if you know the numbers for each lens.
Most of the time they are all close enough not to worry, but if you're shooting wide open it's worth making a quick adjustment if you have time.
Posted 09/09/2009 - 21:10
Link
No real downside, except a really annoying 'debug' notice permanently displayed on the back panel.
It's such a long time since my camera was normal I can't remember if the back screen goes truly black when not in use, but mine is a bit annoying in the dark as it glows just enough to reflect me in the view finder unless I put my hand in the way.
But who the hell shoots in the dark?
It's such a long time since my camera was normal I can't remember if the back screen goes truly black when not in use, but mine is a bit annoying in the dark as it glows just enough to reflect me in the view finder unless I put my hand in the way.
But who the hell shoots in the dark?
Posted 15/09/2009 - 07:14
Link
I did some print test on my camera k10d lens 18-55mm and on a t-pod with remote realise and I've defiantly go a problem with my focus. i was getting only sharp in the centre of the shot but at f32 i expect all of the focus screen to be sharp ?
So i went to manual focus and it was like my eyes had been cleaned
what i would like to know where is the focus adjustment in setting/debug mode
James
So i went to manual focus and it was like my eyes had been cleaned
what i would like to know where is the focus adjustment in setting/debug mode
James
My Fluidr
"To see in colour is a delight for the eye, But to see in black and white is a delight for the soul" ANDRI HERY
"To see in colour is a delight for the eye, But to see in black and white is a delight for the soul" ANDRI HERY
Posted 15/09/2009 - 10:06
Link
pink wrote:
I did some print test on my camera k10d lens 18-55mm and on a t-pod with remote realise and I've defiantly go a problem with my focus. i was getting only sharp in the centre of the shot but at f32 i expect all of the focus screen to be sharp ?
So i went to manual focus and it was like my eyes had been cleaned
what i would like to know where is the focus adjustment in setting/debug mode
James
From what I've read it's something you have to enable using third party software. Take a look at this link>linkI did some print test on my camera k10d lens 18-55mm and on a t-pod with remote realise and I've defiantly go a problem with my focus. i was getting only sharp in the centre of the shot but at f32 i expect all of the focus screen to be sharp ?
So i went to manual focus and it was like my eyes had been cleaned
what i would like to know where is the focus adjustment in setting/debug mode
James
Seems a lot of members have gone down this route, so you should get a lot of very helpful advice here
Posted 15/09/2009 - 12:31
Link
You need to take what Ricehigh says with a very large grain of salt. He is an embittered nincompoop with a grudge against Pentax, and does everything he can to create trouble. He is also technically clueless, and much of his "scientific" analysis is simply hogwash.
G
G
Keywords: Charming, polite, and generally agreeable.
Posted 15/09/2009 - 13:05
Link
George Lazarette wrote:
and much of his "scientific" analysis is simply hogwash.
Having read quite a bit of RH, on and off over the last couple of years, I do agree with this. and much of his "scientific" analysis is simply hogwash.
Usually it's not his own work that he 'reports' anyway, and the conclusions he draws are often not valid - based either on what the 'studies' actually did, or indeed on what they should have done, since they are usually riddled with flaws as well.
They are invariably wrapped up in pseudo-scientific language, full of apparent authority, but proving nothing.
Sadly, studies that do not show what they are claimed to show are rife, and many people read them far too uncritically.
Sorry for the rant, but I abhor bad science - and there's a lot of it about.
.
Pentax K-3, DA18-135, DA35 F2.4, DA17-70, DA55-300, FA28-200, A50 F1.7, A100 F4 Macro, A400 F5.6, Sigma 10-20 EXDC, 50-500 F4.5-6.3 APO DG OS Samsung flash SEF-54PZF(x2)
.
Pentax K-3, DA18-135, DA35 F2.4, DA17-70, DA55-300, FA28-200, A50 F1.7, A100 F4 Macro, A400 F5.6, Sigma 10-20 EXDC, 50-500 F4.5-6.3 APO DG OS Samsung flash SEF-54PZF(x2)
.
Posted 15/09/2009 - 14:49
Link
That's the downside of the Internet - everyone can be an expert, whether they are or not. It's unfortunate that a lot of people may be very misled by misinformation.
Best regards, John
Add Comment
To leave a comment - Log in to Pentax User or create a new account.


2106 posts
19 years
Mold,
North Wales
What I immediately noticed is that the K20D is definitely a very significant improvement on the K20D, the most significant 3 improvements to me are:
1. Image Detail
2. Image Detail
3. Image Detail
I have to say it 3 times as the K20D still amazes me on the amount of detail it can capture...brilliant piece of kit for landscape work
Simon
My Facebook page http://www.facebook.com/landscapephotographyuk
Find me on Google+ link