Is my 40mm backfocusing
Posted 10/07/2011 - 22:37
Link
Nope +6 with both screw driven lenses (40 & 100) en -6 with the SDM lenses (DA*16-50 & DA*50-135) on the K5.
Posted 10/07/2011 - 22:57
Link
Interesting... in my case the 40mm is -6/7 as is the 18-55 neither are SDMs right?
Posted 10/07/2011 - 23:31
Link
Only the DA* and the DA17-70 use SDM and the DA18-135 use DC, for the rest they all use the motor inside the camera body to drive the AF.
The lens calibration is a combination between variation in the camera (af module) and in the lens, they both have some tolerance build into them.
But since i got both the same result with my lenses and the type of focus i was wondering if the camera might use a different algorithme with the SDM lenses for example or something like that.
The lens calibration is a combination between variation in the camera (af module) and in the lens, they both have some tolerance build into them.
But since i got both the same result with my lenses and the type of focus i was wondering if the camera might use a different algorithme with the SDM lenses for example or something like that.
Posted 11/07/2011 - 07:07
Link
The reason we have lens calibration is down to the manufacturing tolerances used in the lens mount, both on the camera side and lens side. The tolerances are very fine but slight variations cause a shift in focus point with different lens/camera combinations. I had a link to an article somewhere I'll see if I can find it.
John
John
Posted 11/07/2011 - 08:02
Link
We've always had inconsistencies, but prior to being able to view huge magnifications on screen it hasn't really been a problem. Likewise, we now have very complex zoom lenses and no doubt that does not help either.
With film the problem was film flatness, but thankfully at least a sensor is almost certain to be at least flat. I hope....
With film the problem was film flatness, but thankfully at least a sensor is almost certain to be at least flat. I hope....
Best regards, John
Posted 11/07/2011 - 09:08
Link
johnriley wrote:
We've always had inconsistencies, but prior to being able to view huge magnifications on screen it hasn't really been a problem.
With film the problem was film flatness, but thankfully at least a sensor is almost certain to be at least flat. I hope....
Being able to pixel-peep at magnifications 100% and beyond shows up the slightest inconsistency as John says.We've always had inconsistencies, but prior to being able to view huge magnifications on screen it hasn't really been a problem.
With film the problem was film flatness, but thankfully at least a sensor is almost certain to be at least flat. I hope....
I noticed in the days when I was still using film that Sigma lenses needed slighty greater torque when mounting them on the MX, the lens mount was probably slightly thicker or not made to the tolerance of a genuine Pentax lens, I've not noticed this with later Sigma lenses though.
John
Posted 11/07/2011 - 10:18
Link
johnriley wrote:
With film the problem was film flatness, but thankfully at least a sensor is almost certain to be at least flat. I hope....
ANd that's also a reason you see it better on digital.With film the problem was film flatness, but thankfully at least a sensor is almost certain to be at least flat. I hope....
The thickness of the lightsensative area of a sensor is very small but the grain with films had some thickness to them so it didn't need to be so precise.
Add Comment
To leave a comment - Log in to Pentax User or create a new account.



314 posts
15 years
Watford