Infra Red on istD?
Posted 22/11/2003 - 21:19
Link
The techniques I have seen and use for digital infra-red effects are created in Photoshop, so you can start with any RGB file from the camera.
If you wanrt the effect to look really authentic, then it's worth remembering that infra-red film has no anti-halation layer. This means that highlights spread and "bleed" but the shadows don't, so it's not just a matter of tonal values and grain. It's not that easy to make digital IR look as good as film can. The real beauty of digital is that you can decide to shoot IR after the event!
If you wanrt the effect to look really authentic, then it's worth remembering that infra-red film has no anti-halation layer. This means that highlights spread and "bleed" but the shadows don't, so it's not just a matter of tonal values and grain. It's not that easy to make digital IR look as good as film can. The real beauty of digital is that you can decide to shoot IR after the event!
Best regards, John
Posted 26/11/2003 - 14:19
Link
Unfortunately, the ist-D (in my tests) did not show sensitivity in the infrared range. There are many digital cameras out there that will allow infrared photography, but not the ist-D. I use the Minolta Dimage 7 with the hoya ruby infrared filter in front of the lens. I get fantastic infrared images, and the camera will autofocus without any problem at all. Go to techtv.com and look at yesterdays show notes (11-25-03) for getting the most from your digital camera. The person talking about infrared pics on digital cameras has a list of current models that are capable of this. The problem is that most digital cameras are sensitive in the infrared range, but the manufacturers put IR filters in front of the sensors to cut this range of light so it will not interfere with the visible range.
Hope this helps,
Don Schoolmaster
Hope this helps,
Don Schoolmaster
Posted 26/11/2003 - 14:49
Link
Don Schoolmaster,
The other fact to bear in mind is that the Dimage 7 uses phase focussing (I think) - by reading information directly off the CCD. Hence, any sensitivity in the IR range will allow it to focus.
The *istD, on the other hand, has seperate focussing, as in all the film versions. In addition, the electronics for the CCD are different to the consumer cameras. The way the image is clocked out of the chip requires a real shutter (whereas in the Dimage 7, and my Canon S30 etc etc the sensor does not require a physical shutter, and that's why those cameras can do video too ) Here's a nice link describing the difference: http://www.dpreview.com/learn/Glossary/Camera_System/Sensor_01.htm The *istD is "Full Frame Transfer" (not to be confused with full 35mm frame size), whereas the Dimage is "Interline Transfer".
If I find any other info on IR and the *istD, I'll post it here first
That said, there are some really neat actions and tricks to simulate IR under Photoshop (as John quite rightly said).
Matt
The other fact to bear in mind is that the Dimage 7 uses phase focussing (I think) - by reading information directly off the CCD. Hence, any sensitivity in the IR range will allow it to focus.
The *istD, on the other hand, has seperate focussing, as in all the film versions. In addition, the electronics for the CCD are different to the consumer cameras. The way the image is clocked out of the chip requires a real shutter (whereas in the Dimage 7, and my Canon S30 etc etc the sensor does not require a physical shutter, and that's why those cameras can do video too ) Here's a nice link describing the difference: http://www.dpreview.com/learn/Glossary/Camera_System/Sensor_01.htm The *istD is "Full Frame Transfer" (not to be confused with full 35mm frame size), whereas the Dimage is "Interline Transfer".
If I find any other info on IR and the *istD, I'll post it here first
That said, there are some really neat actions and tricks to simulate IR under Photoshop (as John quite rightly said).
Matt
http://www.mattmatic.co.uk
(For gallery, tips and links)
(For gallery, tips and links)
Add Comment
To leave a comment - Log in to Pentax User or create a new account.


2277 posts
24 years
I have heard it is possible on other digis.
I do allot of infra red stuff.
thx