Hood v quality filter

kingfisher
Posted 15/12/2011 - 10:41 Link
Algi, I'm not sure what 'normal' filter is the guy refering to, but presumably a UV filter. Using UV filter can in some cases increase contrast of far objects as it reduces the effect of atmospherical haze. But in short distance filter really degrades image quality a bit, although in case of high quality filters I wouldn't be able to spot the difference without overserious pixel-peeping.
Algernon
Posted 15/12/2011 - 12:45 Link
I was amazed how much difference/better a Tiffen Haze 1 filter made
to the edges of a Pentax-K 28mm f/3.5 over about 100m. Never looked
at anything closed because it was over water. After using filters
for over 40 years I've never seen one degrade the image.
Half Man... Half Pentax ... Half Cucumber

Pentax K-1 + K-5 and some other stuff

Algi
simonkit
Posted 15/12/2011 - 13:32 Link
I've heard that high quality UV filters can improve contrast and therefore apparent sharpness - this seems to depend very much on the coating that the actual lens has though, if it's a poor one the superior coating of the high quality filter can apparently improve things. My thinking though is that on modern and high spec pentax lenses this isn't often going to be the case

Simon
Horst
Posted 29/01/2012 - 06:34 Link
I believe a lenshood is absolutly essential for any lens, except maybe the 50 macro-A lens I own. This lens is so deep set that is alreadiy functions as a hood.
I wont use a lens, unless the hood is fitted. The hood also stops the glare of a filter, if any is present,.
The hood does not only stop the Sun from glaring in to it, but also stops any sidelight from affecting the picture. Sidelight can be the green from a lawn beside, or similar.
The hood also protects your lens to a large extend.
Years ago, when I used my Super-A with the 50mm A lens, I tripped on a concrete walkway and the front of the camera lens hit the ground. The lens hood had a ding, but the lens was still ok. A replacement hood costs a lot less than a replacement lens.
I am not a great believer in rubber hoods. They have a tendency to break after a while when they are folded up..
Filters are also relatively inexpensive and if they get a scratch, replace it.
In earlier days, when back and white was still king, Nobody complained about a Yellow filter. That was the norm then and was often fitted for good on to the lens.

Horst
ChrisR
Posted 29/01/2012 - 09:45 Link
Do I use sandals, or Wellington boots, both fit onto my feet, but each have there own use, advantage/disadvantage.

Take care.
Chris R.

I. El. (Eng). (Rtd).
JohnX
Posted 29/01/2012 - 11:28 Link
Hood first; consider filters second, and only for specific purposes, i.e a polariser, ND, etc.
Edited by JohnX: 29/01/2012 - 11:29
cabstar
Posted 29/01/2012 - 12:08 Link
Hood always, never ever use filters, just don't see the point using filters for protection...

Seen lenses damaged by filter shattering scratching the front element though..
PPG Wedding photography Flickr
Concert photography

Currently on a Pentax hiatus until an FF Pentax is released

Add Comment

To leave a comment - Log in to Pentax User or create a new account.



Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo