HIDDEN FEATURES IN A K10?

adwb
Posted 08/11/2009 - 22:27 Link
I'm sure some where I once saw a post that listed some button push combinations which had feature/mode effects not mentioned in the K10 hand book,
would some one kindly tell me where to find this info?
thanks
Alistair
Assorted Pentax bodies and lenses as well as Sony and Olympus kit
hefty1
Posted 08/11/2009 - 23:22 Link
I think the most commonly used "secret" feature of the K10D is changing the ISO by holding the "OK" button and turning the front control wheel. Holding "OK" and the Green Button together sets ISO to auto.

The wireless flash functions aren't mentioned in the manual as they were introduced with a firmware update (v1.1?) so didn't exist when the manual was written. Ditto the SDM lens functions which came in with firmware v1.3.

K10D's also have a hidden "Debug" Menu which is intended for Pentax Technicians only but which can be reached via hacking. You'd only use this if there was a front/back focus issue though as there's nothing in there you'd want on a regular basis.

No others spring to mind - the manual is quite comprehensive, just not particularly well written or easy to understand at times...
Joining the Q
adwb
Posted 08/11/2009 - 23:29 Link
hefty1 wrote:

The wireless flash functions aren't mentioned in the manual as they were introduced with a firmware update (v1.1?) so didn't exist when the manual was written. Ditto the SDM lens functions which came in with firmware v1.3.

Thank you can you elaborate on the info above please?
Alistair
Assorted Pentax bodies and lenses as well as Sony and Olympus kit
hefty1
Posted 08/11/2009 - 23:34 Link
Cameras running the original (V1.0) firmware don't have wireless flash capability or the ability to focus SDM lenses (the DA*'s and the DA17-70).

Cameras running v1.1 firmware can operate slave (P-TTL) flashes wirelessly but still can't focus SDM lenses.

Cameras running v1.3 firmare (the last version issued) can do everything.

Was there any specific information you were after?
Joining the Q
Smeggypants
Posted 09/11/2009 - 01:13 Link
hefty1 wrote:
I think the most commonly used "secret" feature of the K10D is changing the ISO by holding the "OK" button and turning the front control wheel. Holding "OK" and the Green Button together sets ISO to auto.

I just discovered this only yesterday on the K20. Well useful!!
[i]Bodies: 1x K-5IIs, 2x K-5, Sony TX-5, Nokia 808
Lenses: Pentax DA 10-17mm ED(IF) Fish Eye, Pentax DA 14mm f/2.8, Sigma 17-70mm f/2.8, Pentax-A 28mm f/2.8, Sigma 30mm F1.4 EX DC, Pentax-A 50mm f/1.2, Pentax-A 50mm f/1.4, Pentax-FA 50mm f/1.4, Pentax-A 50mm f/1.7, Pentax DA* 50-135mm f/2.8, Sigma 135-400mm APO DG, and more ..
Flash: AF-540FGZ, Vivitar 283
Mike-P
Posted 09/11/2009 - 06:51 Link
I didnt know about the ok & green button auto ISO ... after all this time
aminstar
Posted 09/11/2009 - 07:23 Link
Mike-P wrote:
I didnt know about the ok & green button auto ISO ... after all this time
In the K20D manual mentions it.
adwb
Posted 09/11/2009 - 08:14 Link
Thanks every one especially Heftyone, ok and green button ect are NOT in the K10d boot not even the download "current book" from Petax
thank yo
Alistair
Assorted Pentax bodies and lenses as well as Sony and Olympus kit
Mike-P
Posted 09/11/2009 - 12:39 Link
aminstar wrote:
Mike-P wrote:
I didnt know about the ok & green button auto ISO ... after all this time
In the K20D manual mentions it.
I don't have a K20D
Daniel Bridge
Posted 09/11/2009 - 14:58 Link
On my K10D you just have to press the green button to return to Auto-ISO. No need to use the OK button. And you can change the dials to do anything you want really (within reason ), so in Av mode, my front dial controls ISO, in Tv the rear one does. Again, no need for the OK button.

Dan
K-3, a macro lens and a DA*300mm...
Mannesty
Posted 09/11/2009 - 15:29 Link
The use of the OK button to change the ISO setting is very useful in TAv mode where the two dials usually have their normal assignment.
Peter E Smith - flickr Photostream
Anvh
Posted 09/11/2009 - 19:04 Link
Daniel Bridge wrote:
On my K10D you just have to press the green button to return to Auto-ISO. No need to use the OK button. And you can change the dials to do anything you want really (within reason ), so in Av mode, my front dial controls ISO, in Tv the rear one does. Again, no need for the OK button.

Dan
Daniel you're making things complicated now.
It goes to auto ISO because you have iso under the front dial.


What is also not in the manual is that you can set the pop-up wireless flash to controller in the C-menu with version 1.3
When set to controller the pop-up flash is very low and should hardly contribute to the flash in the photo.
Stefan
Comment Image

K10D, K5
DA* 16-50, DA* 50-135, D-FA 100 Macro, DA 40 Ltd, DA 18-55
AF-540FGZ
iceblinker
Posted 09/11/2009 - 23:10 Link
Mannesty wrote:
The use of the OK button to change the ISO setting is very useful in TAv mode where the two dials usually have their normal assignment.
And also in P mode if you have the dials set to control aperture and shutter.

The combination of buttons is a bit ergonomically awkward, though. Easier with the K-7 with its dedicated ISO button, though still not perfect.

Actually, I don't think the manual does ignore many features, but some are easy to miss if you don't read it thoroughly (or alternatively experiment with all the buttons/dials/menus).
~Pete

Add Comment

To leave a comment - Log in to Pentax User or create a new account.



Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo