Hello from the north east! ...and advice please!
http://www.camerarepairs-r-us.co.uk/
John
https://pentaxphotogallery.com/artists/barrieforbes
https://www.flickr.com/photos/189482630@N03/
“Nobody made a greater mistake than he who did nothing because he could do only a little.”
Edmund Burke (1729 – 1797)
[IMG]http://i941.photobucket.com/albums/ad254/weldingblues/K-7userbar-red.jpg[/IMG]
Welcome to the forum!
Ron
Mt Pleasant WI
Sigma 10-20MM Ultra Wide
18-55WR
Tamron 70-300
AF540FGZ Flash & AF360FZG Flash
K-1ii,K-3iii's.
SMC PENTAX-F 1:2.8 28mm, HD Pentax-D FA* 1:1.4 50mm SDM AW,
SMC PENTAX-D FA MACRO 1:2.8 100mm WR,
SMC PENTAX-DA* 1:4 300mm ED [IF] SDM,
SMC PENTAX-FA* 1:4 600mm IF & ED,
HD PENTAX -DA 1.4x AW AF REAR CONVERTER,
Pentax Photo Gallery
My dad's S1a had a semi-auto takumar 55mm f2 - you cocked a lever on the side of the lens to open the aperture wide, focussed, composed and when the shutter was pressed the aperture snapped to its preset value, having to be reset by cocking again. Fantastic!
Am I right in thinking that the only clue to date of manufacture is on the rewind knob (green letter "R", pre 1964, orange letter "R", post 64 and able to take the takumar 1.4?). In other words there's no clue in the serial numbers?
Cheers,
Stephen
Most welcome from the widest high street in the UK and the birth place of the friction match......and if you fancy the first passenger train ride available?
Regards
Add Comment
To leave a comment - Log in to Pentax User or create a new account.


2 posts
15 years
Have rediscovered the meaning of the "Just hold a Pentax" slogan of the 1960s. Used my dad's S1a from the age of 5, ownwed it myself from 1978-1979 and then foolishly sold it to fund progression onto a new (non-PENTAX) slr.
Anyway, bought an S1A off ebay but it has a common shutter fault (I got a refund and the seller said I could keep it for spares or repair) - mirror occasionally sticks in the up position / occasionally shutter acts as if on "B" setting at slower speeds / at 500th and the unmarked 1000th, the second shutter curtain often catches up with the first so little or no exposure.
Can anyone recommend a repairer who they have experience of who can "clean, lubricate, adjust and has experience of vintage Pentax models. Or does it sound like a "no hoper" and should I place it as a nice ornament on my shelf?
Mike