Front/back focus on K200d

I know that you can adjust this using a utility on the K10d, and it's built into the K20d menus, but can it be done on the K200d?

You could try either of these:-
For K10D with firmware version 1.10.
1. Power OFF
While pressing [PLAY]+[OK], turn the camera on.
Firmware is desplayed on LCD.
then press [Fn]->[Fn]->[INFO]->[MENU] within 5 seconds.
You can see DEBUG mode screen.
By pressing [Right key],Make [DEBUG MODE DIS] to [DEBUG MODE EN].
Then, Press [OK].
2. Press [MENU] and go to SETUP tab.
then, Press [Up key], you can see TEST MODE.
Select AF TEST.
By pressing [Down key], select FOCUS CORR.
If you have Front-focusing, reduce the value.
If you have back-focusing, increase the value.
press [OK] and quit out of setup menu.
3. Test your camera for correct focus.
(repeat step 2. until you are satisfied with the result.)
4. Power OFF
While pressing [PLAY]+[OK], turn the camera on.
Firmware is desplayed on LCD.
then press [Fn]->[Fn]->[INFO]->[MENU] within 5 seconds.
You can see DEBUG mode screen.
By pressing [Right key],Make [DEBUG MODE EN] to [DEBUG MODE DIS].
Then, Press [OK].


For DL,DS,DS2,K100D :
1. Power OFF
While pressing [AE-L]+[INFO], turn the camera on.
Firmware is desplayed on LCD.
Press [MENU]->[MENU]->[INFO] within 5 seconds.
You can see DEBUG mode screen.
By pressing [Right key],Make [DEBUG MODE DIS] to [DEBUG MODE EN].
Then, Press [OK].
2. Press [MENU], you can see setup menu.
By pressing [Up key], select AF TEST.
By pressing [Right key], go into AF TEST menu.
By pressing [Down key], select FOCUS CORR.
now you can adjust shift amount by pressing [right key] or [left key].
(*Don't touch AF Area Test.)
after changing the value, Press [OK] to save.
3. Test your camera for correct focus.
(repeat step 2. until you are satisfied with the result.)
4. Power OFF
While pressing [AE-L]+[INFO], turn the camera on.
Firmware is desplayed on LCD.
Press [MENU]->[MENU]->[INFO] within 5 seconds.
You can see DEBUG mode screen.
By pressing [Right key],Make [DEBUG MODE EN] to [DEBUG MODE DIS].
Then, Press [OK].

holding the menu button when turning the camera on shows the firmware version,

Thanks guys, Ill have a play and report back.

I've tried the K10d way, it doesn't work.

So I tried the K100d way, that doesn't work either!

I can get into debug on my K110d the second way, but don't need to, any more ideas out there on how to enter debug on the K200d?

Does the K20d have a hidden menu like this?

Its in the Custom Menu.

i've tried these instructions for K10D with Firmware version 1.30 and had no joy. Is there seperate instructions for version 1.3.

You need some russian software to enable the debug mode in in version 1.30 of the K10D
Here is the english translation USE AT OWN RISK!!!!!!

That Russian software worked fine for my K10D (once I'd worked out how to use it).

I so glad this kind of thing is easier with the K20D - with AF adjustment included in a normal menu instead of being a hidden feature.

you have scared me now

Is it possible to: 1/ revert to version 1.10. 2/ debug. 3/ reinstall version 1.30... Would the debug hold after the reinstall??

Yes sorry, it's just that I don't want the blame if your camera doesn't work anymore.

Version 1.30 will overwrite the other version, no settings are saved.
The russian software is really the only way if you want to use version 1.30.
Here's some text on how to do it link

I haven't heard of anyone that had broke their camera with using the software if that helps but still only use it if you really need it.

The english version of the russian software works fine. Just don't mess with any other menu settings that are revealed by this procedure.

I could try this with my K200d, does anybody know the password the programme asks for???

Just found it on another site, its

penta-club.ru

For those who need it.