flash

pete
Posted 15/02/2009 - 23:17 Link
I have a flash unit (vivitar) which I used on my mesuper. very good flash gun. Now the question is will this work on my K200d?. Will it work from the hotshoe and can it be plugged into the camera off the hotshoe (like on the mesuper) or should i just buy a new flash gun?
womble
Posted 16/02/2009 - 00:16 Link
Yes, it will work BUT the main problem is the trigger voltage. Old flashes can have very high trigger voltages which may fry the electronics of your camera. There are quite a few old threads on this topic, have a search and read up.

Cheers, Kris.
Kris Lockyear
It is an illusion that photos are made with the camera… they are made with the eye, heart and head. Henri Cartier-Bresson
Lots of film bodies, a couple of digital ones, too many lenses (mainly older glass) and a Horseman LE 5x4.
fatspider
Posted 16/02/2009 - 00:19 Link
I suppose the answer is buy another flashgun

Unless of course your vivitar is some supa-dupa all singing P-TTL unit produced with DSLRs in mind.

Not sure about the 200D but I suspect it will only function fully with a modern gun. You could try using it totally manually of course but then you run the risk of the dreaded "too high a voltage across the contacts scenario"


PS if you want another gun for a 4 pin Pentax Pre-DSLR hotshoe then drop me a PM. I have a Sunpack 888AF Pentax dedicated, you can have for the cost of the postage and a small donation to the charity of your choice.
My Names Alan, and I'm a lensaholic.
My PPG link
My Flckr link
fatspider
Posted 16/02/2009 - 00:20 Link
Quote:
the main problem is the trigger voltage
Trust a Womble to beat you to it
My Names Alan, and I'm a lensaholic.
My PPG link
My Flckr link

Add Comment

To leave a comment - Log in to Pentax User or create a new account.



Proudly supporting Pentax User

Samsung Logo Asahi Pentax Logo